Intel HD Graphics Framebuffer Edits - Desktop

[toleda]

cannot follow the guide

Ignored Post #1/Problem Reporting; attach all requested files

 

[wado729]

I have a MSI Z370i Gaming Pro Carbon AC, i7 8700k, HD630 on 10.13.6

On 10.13 my dual monitors worked perfectly. On 10.13.6 either one monitor never comes on or there's extreme glitching on both if i change the config.

From reading in here, it looks like I can't get my dual monitors to work at all on 10.13.6? Is that correct?

 

[toleda]

it looks like I can't get my dual monitors to work at all on 10.13.6? Is that correct?

How did you arrive at that conclusion?
See Post #1/Problem Reporting; attach all requested files

 

[wado729]

How did you arrive at that conclusion?
See Post #1/Problem Reporting; attach all requested files

I've been researching it on here and other hackintosh sites and I haven't seen anyone have success with intel 630, 10.13.6, and dual monitors.

Please see below:

1. Description of Intel Graphics problem - 2nd monitor is a black screen in MacOS. It works before the graphic driver is loaded but then goes black once MacOS is loaded.
   1. macOS version -10.13.6 / motherboard model- MSI z370i Gaming Pro Carbon AC/BIOS version - 7B43v10/processor - i8700k/graphics Intel UHD 630
   2. Procedure/Guide Used - Most up to date versions of Lilu and Whatevergreen
   3. Copy of IOReg/File/Save a Copy As…, verify file (no ioreg.txt) - Attached.
   4. Clover
      1. EFI/Clover/config.plist - Attached
      2. DPCIManager/Misc/Boot Log - Attached
         
      3. EFI/Clover/ACPI/Patched/dsdt.aml (if installed) - Not installed
      4. EFI/Clover/ACPI/Patched/ssdt.aml (if installed) - Not installed

 

[toleda]

dual monitors

Details?
Display 1/working: model, resolution, connector
Display 2/not working: model, resolution, connector
Shutdown, disconnect Display 1, connected Display 2
Restart, reply with new files.

 

[wado729]

Details?
Display 1/working: model, resolution, connector
Display 2/not working: model, resolution, connector
Shutdown, disconnect Display 1, connected Display 2
Restart, reply with new files.

Sorry, files attached.

Display 1: Acer S242HLbid 24 inch 1080P @ 60 hz HDMI
Display 2: Acer X223W 1680 x 1050 at 60 Hz DisplayPort via VGA to DP adapter

 

[toleda]

Display 2: Acer X223W 1680 x 1050 at 60 Hz DisplayPort via VGA to DP adapter

VGA to DP adapter: technically impossible, useless.
What is wrong with the motherboard DP port?

 

[wado729]

VGA to DP adapter: technically impossible, useless.
What is wrong with the motherboard DP port?

It's not useless, it worked on 10.13. Here is the link
https://www.amazon.com/gp/product/B01GPMRYNM/?tag=tonymacx86com-20
There is nothing wrong with the DP port, the monitor only has VGA and DVI while the motherboard only has 1 HDMI and DP.

 

[toleda]

DisplayPort via VGA to DP adapter

"VGA to DP adapter" is impossible
DP to VGA is possible and supported
DP to DVI is a much better solution for that monitor
WhateverGreen.kext has edited all connectors to HDMI, only one connector should be HDMI.
Choices:
1. Keep WhateverGreen: post to WhateverGreen for support
2. Remove WhateverGreen: restart, reply with new files for both scenarios

 

[wado729]

I did Choice 2, please see the attached zip files. Each has the config, IOReg, and Boot Log.