Intel HD Graphics Framebuffer Edits - Desktop

[Deleted member 1759528]

"Clover Framebuffer Patches (Download, select View Raw)"

Where can I download?

 

[1and1get2]

Laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

your config.plists are my first source of inspirations. I managed to get both first DP and HDMI working following guides from you and Toleda and many others. But I still have no luck enabling the second display ports.
It seems I can either enough DP1 + HDMI or DP2 (with messed up framebuffer-portnumber mapping) but not at the same time.
and seems like my port-number 0x7 was never usable. (verified under linux that they all work)

files I dumped under ubuntu are hosted here: https://github.com/1and1get2/CP65S/tree/master/VIDEO_PORTS_HDMI_DP/file_dump

If you could help me and point me a direction or where I've done wrong it'd be much appreciated

P.S. just in case you cannot open .page file (or rather using an online version)
https://docs.google.com/document/d/1JAVZ77hAJPSjafW5VoN48dwkM8xFJwuKz6Gs_zYT6WQ/edit?usp=sharing

 

[RehabMan]

your config.plists are my first source of inspirations. I managed to get both first DP and HDMI working following guides from you and Toleda and many others. But I still have no luck enabling the second display ports.
It seems I can either enough DP1 + HDMI or DP2 (with messed up framebuffer-portnumber mapping) but not at the same time.
and seems like my port-number 0x7 was never usable. (verified under linux that they all work)

files I dumped under ubuntu are hosted here: https://github.com/1and1get2/CP65S/tree/master/VIDEO_PORTS_HDMI_DP/file_dump

If you could help me and point me a direction or where I've done wrong it'd be much appreciated

P.S. just in case you cannot open .page file (or rather using an online version)
https://docs.google.com/document/d/1JAVZ77hAJPSjafW5VoN48dwkM8xFJwuKz6Gs_zYT6WQ/edit?usp=sharing

https://www.tonymacx86.com/threads/desktop-only-in-this-graphics-forum-section-desktop-only.102219/

Laptop questions should be posted in the appropriate laptop forum.

 

[1and1get2]

https://www.tonymacx86.com/threads/desktop-only-in-this-graphics-forum-section-desktop-only.102219/

Laptop questions should be posted in the appropriate laptop forum.

sorry i was aware of that, moved to https://www.tonymacx86.com/threads/hd4600-laptop-enabling-second-dp-lcd-hdmi-2-dp-setup.240669/

P.S. wasn't able to find a way to have my original reply deleted

 

[toleda]

Where can I download?

Post #1:
Clover Framebuffer Patches (Download, select View Raw)

1. AppleHDA HDMI Audio/Post #1/cloverHDMI

 

[krandv]

I'm trying to install OSX Sierra 10.12.6 on a system with i5-2500k + MB ASROCK H61M-VG3 using built-in HD3000 graphics. I followed the guide https://www.tonymacx86.com/threads/...-fix-for-os-x-el-capitan-using-clover.176946/

But the system fails to load with Inject Intel = YES. It hangs during boot. If this flag is set to NO then the system loads but obviously w/o any HW acceleration. What can be the reason?
I tried to set different SMBIOS: MacPro13,1 iMac14,2, macMini5,1

I'm attaching the problem reporting files.

 

[toleda]

I'm trying to install OSX Sierra 10.12.6 on a system with i5-2500k + MB ASROCK H61M-VG3 using built-in HD3000 graphics.

This thread is for working graphics, off topic.
Post to Sierra Desktop Support | tonymacx86.com pr Graphics | tonymacx86.com

 

[ozhack]

Would someone place confirm that this thread is applicable for HD4600? HD4600+ is being referred here.

Also how do I do this step?

Intel HD Graphics/kext/property/framebuffer (hex, dsdt/ssdt)

• HD4600+/Azul/AAPL,ig-plartform-id/03 00 22 0D

 

[Gigamaxx]

Would someone place confirm that this thread is applicable for HD4600? HD4600+ is being referred here.

Also how do I do this step?

Intel HD Graphics/kext/property/framebuffer (hex, dsdt/ssdt)

• HD4600+/Azul/AAPL,ig-plartform-id/03 00 22 0D

For HD 4600 graphics the normal settings are set in clover. Use cursor arrows at boot screen to go to options. Go to graphics and use inject intel, intel ID 0x0412806 (0x04168086 may also work) and ig 0x0d220003. If it works you can set them permanently using clover configurator app.

 

[toleda]

Would someone place confirm that this thread is applicable for HD4600? HD4600+ is being referred here.

HD4600+ means all Haswell graphics solutions as noted in Post #1.
Pre requisite: HD 4600 graphics working; if not, off topic.
Purpose: Match motherboard connector to macOS framebuffer connector

DP is native; HDMI or DVI connectors may require edits.​

What is the problem you are trying to solve?