Contribute
Register

Intel HD 3000 only sometimes QE/CI

Status
Not open for further replies.
Sounds like you forgot to copy HFSPlus.efi. Follow the guide carefully.

I was wondering, because I ever had HFSPlus.efi in the drivers folder o_O
But I downloaded it again and now Clover is showing me my drives.

Booted in OS X and see: QE/CI works! (see Image)
But the integrated laptop screen shows only the half image, streched over the monitor. (see Image)

Any ideas?

Sorry for my bad english :rolleyes:
 

Attachments

  • IMG_0809.jpg
    IMG_0809.jpg
    1,004.4 KB · Views: 128
  • IMG_0810.jpg
    IMG_0810.jpg
    988.2 KB · Views: 143
I was wondering, because I ever had HFSPlus.efi in the drivers folder o_O
But I downloaded it again and now Clover is showing me my drives.

VBoxHFS is disabled by my plist files because the guide uses HFSPlus.efi instead.

Booted in OS X and see: QE/CI works! (see Image)
But the integrated laptop screen shows only the half image, streched over the monitor. (see Image)

Any ideas?

Sorry for my bad english :rolleyes:

Post EFI/Clover folder.

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Are you certain your laptop has native 1600x900 screen resolution?
 
deleted, due to a duplicate post
 

Attachments

  • Dominik’s MacBook Pro.ioreg
    4.7 MB · Views: 97
  • EFI.zip
    20.4 MB · Views: 82
Last edited:

Attachments

  • EFI.zip
    20.4 MB · Views: 79
  • Dominik’s MacBook Pro.ioreg
    4.7 MB · Views: 104
Files are attached.

Yes, pretty sure.

Could be EDID problem. I extracted it from ioreg and decoded with edid-decode and looks ok:

Result:
Code:
Speedy-OSX:edid-decode RehabMan$ ./edid-decode<edid.bin
Extracted contents:
header:          00 ff ff ff ff ff ff 00
serial number:   06 af 9e 15 00 00 00 00 00 15
version:         01 04
basic params:    90 26 15 78 02
chroma info:     c4 95 9e 57 53 92 26 0f 50 54
established:     00 00 00
standard:        01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1:    10 27 40 c6 60 84 1a 30 30 20 36 00 7e d6 10 00 00 18
descriptor 2:    00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 20
descriptor 3:    00 00 00 fe 00 41 55 4f 0a 20 20 20 20 20 20 20 20 20
descriptor 4:    00 00 00 fe 00 42 31 37 33 52 57 30 31 20 56 35 20 0a
extensions:      00
checksum:        c0

Manufacturer: AUO Model 159e Serial Number 0
Made week 0 of 2011
EDID version: 1.4
Digital display
6 bits per primary color channel
Digital interface is not defined
Maximum image size: 38 cm x 21 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing is preferred timing
Established timings supported:
Standard timings supported:
Detailed mode: Clock 100.000 MHz, 382 mm x 214 mm
               1600 1648 1680 1798 hborder 0
                900  903  909  926 vborder 0
               -hsync -vsync 
Manufacturer-specified data, tag 15
ASCII string: AUO
ASCII string: B173RW01
Checksum: 0xc0 (valid)
EDID block does NOT conform to EDID 1.3!
	Missing name descriptor
	Missing monitor ranges
	Detailed block string not properly terminated

Extract EDID from Windows to compare (use MonInfo).

Try setting config.plist/GUI/ScreenResolution.

Also, it is rare, but some high resolution screens are not dual link. So try without it.
 
Could be EDID problem. I extracted it from ioreg and decoded with edid-decode.

Result:
Code:
Speedy-OSX:edid-decode RehabMan$ ./edid-decode <edid.bin
Extracted contents:
header:          55 73 61 67 65 20 70 62
serial number:   20 66 69 6c 65 6e 61 6d 65 2d
version:         74 6f
basic params:    2d 63 72 65 61
chroma info:     74 65 2d 66 72 6f 6d 20 68 65
established:     78 2d 63
standard:        6c 69 70 62 6f 61 72 64 0a 00 00 00 00 00 00 00
descriptor 1:    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 2:    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3:    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 4:    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
extensions:      00
checksum:        00

No header found
Manufacturer: HCF Model 6c69 Serial Number 1835101797
EDID version: 116.111
Analog display, Input voltage level: 0.714/0.286 V
Sync: Separate Composite Serration 
Maximum image size: 99 cm x 114 cm
Gamma: 2.01
DPMS levels: Suspend Off
Monochrome or grayscale display
Supports GTF timings within operating range
Established timings supported:
  720x400@88Hz
  640x480@60Hz
  640x480@67Hz
  640x480@72Hz
  832x624@75Hz
  1024x768@60Hz
  1024x768@70Hz
  1280x1024@75Hz
Standard timings supported:
  1112x834@101Hz
  1144x858@94Hz
  1136x852@93Hz
  1160x870@96Hz
  328x328@60Hz
non-conformant standard timing (0 horiz)
non-conformant standard timing (0 horiz)
non-conformant standard timing (0 horiz)
Manufacturer-specified data, tag 0
Manufacturer-specified data, tag 0
Manufacturer-specified data, tag 0
Manufacturer-specified data, tag 0
Checksum: 0x0 (should be 0xda)
EDID block does not conform at all!
    Block has broken checksum
    Bad year of manufacture
    Bad week of manufacture

Note there is no 1600x900.

Extract EDID from Windows to compare (use MonInfo).

Okay... I don't really understand all these numbers :D

But I can say you that I'm 100% sure, that my laptop has 1600x900. Right now I'm using a second monitor (external, hdmi, 1920x1080), which works without problems.
 
Okay... I don't really understand all these numbers :D

But I can say you that I'm 100% sure, that my laptop has 1600x900. Right now I'm using a second monitor (external, hdmi, 1920x1080), which works without problems.

My mistake...

See edited, post #15.
 
Can I do this with Clover Configurator? Or is there a difference?

Depends on what you mean by 'this'. If you're referring to config.plist/GUI/ScreenResolution, yes, you can set it with CC.

I don't use CC... I prefer to edit my config.plist with Xcode.
 
Depends on what you mean by 'this'. If you're referring to config.plist/GUI/ScreenResolution, yes, you can set it with CC.

I don't use CC... I prefer to edit my config.plist with Xcode.

Okay...

I've set the ScreenResolution to 1600x900. And I've set the Theme from Bluemac to YosemiteLogin (which is installed).

After a reboot, I saw that Clover doesn't load the theme. Only this standard blue surface.
I can force Clover to load the theme, when I go to Options. Then I go into Themes, and select the theme-name. I press two times enter and then I select return. When I switch from the options menu to the main menu, the theme is loaded.

And when I boot Yosemite there are still these "Graphic Glitches" (?, I don't know how to express that in english).
 
Status
Not open for further replies.
Back
Top