- Joined
- Apr 25, 2015
- Messages
- 18
- Motherboard
- Lenovo T450s
- CPU
- Intel i7 5600U
- Graphics
- Intel HD 5500
- Mac
- Classic Mac
- Mobile Phone
Hi guys,
I've been trying to install Yosemite on my T450s with some help from this thread (http://www.tonymacx86.com/yosemite-laptop-guides/162391-guide-2015-x1-carbon-yosemite.html), because of the similarity of system configurations between T450s and X1Carbon3 and encountered a problem.
I've gone through the installation process (which required some patience and modifications to the guide, but was managable), booted into Yosemite for the first time and then installed clover on the disk which I used for installation. I then copied some kext files (which are attached to the guide I used for installing) onto the EFI partition with the purpouse of making some stuff work and making the system faster, as it's quite slow (this should be fixed with the copying of kexts themselves).
The next reboot, I can't get into Yosemite (probably getting a kernel panic due to lack of drivers). As I am not on track with the hackintosh scene and thus not familiar with common fatal errors, I don't quite know how to solve this one.
I probably could get access to the files on the drive (to change them in a way that would resolve my problems), as this system is installed on a flash stick and I've got access to a Mac, so I could technically mount the USB and run clover installation - this way, I can get access to EFI partition and fix the problem.
I made two screen shots of the error, one before the screen blinks and one after. Shots are attached to this post. Here are some error echoes I think may be connected with the error:
EDIT: yeah ... now I think it's GPU causing the panic, because of Intel 5500.
I'll post my upcoming progress on resolving the issue here.
Before the screen blinks:
After the screen blinks:
Thank you for your time and answers in advance.
I've been trying to install Yosemite on my T450s with some help from this thread (http://www.tonymacx86.com/yosemite-laptop-guides/162391-guide-2015-x1-carbon-yosemite.html), because of the similarity of system configurations between T450s and X1Carbon3 and encountered a problem.
I've gone through the installation process (which required some patience and modifications to the guide, but was managable), booted into Yosemite for the first time and then installed clover on the disk which I used for installation. I then copied some kext files (which are attached to the guide I used for installing) onto the EFI partition with the purpouse of making some stuff work and making the system faster, as it's quite slow (this should be fixed with the copying of kexts themselves).
The next reboot, I can't get into Yosemite (probably getting a kernel panic due to lack of drivers). As I am not on track with the hackintosh scene and thus not familiar with common fatal errors, I don't quite know how to solve this one.
I probably could get access to the files on the drive (to change them in a way that would resolve my problems), as this system is installed on a flash stick and I've got access to a Mac, so I could technically mount the USB and run clover installation - this way, I can get access to EFI partition and fix the problem.
I made two screen shots of the error, one before the screen blinks and one after. Shots are attached to this post. Here are some error echoes I think may be connected with the error:
- Sound assertion in AppleHDAController
- AppleUSBCDCACMData: start - Find CDC driver for ACM data interface failed
EDIT: yeah ... now I think it's GPU causing the panic, because of Intel 5500.
I'll post my upcoming progress on resolving the issue here.
Before the screen blinks:
After the screen blinks:
Thank you for your time and answers in advance.