Installed Catalina - But can't see the mac os x drive in Clover(Unibeast)

[kazukiturbo]

Hi everyone

First time hackintoshing here, So I have installed Catalina on my
i5-3570k w/ Gigabyte Z68 mobo(Sandy bridge)

After installation, I do not see the Mac OS X drive inside Clover, however in the bios it is visible(however can not boot off of the drive)

It's a nvme ssd I have (shouldnt be a problem)

Was wondering if anyone could give me some pointers here?

Thank you very much

 

[reppie]

Same problem here, Z68x-UDH3-B3 rev 1.0. Boot options available when booting from USB fine, albeit only on one monitor. What graphics card are you using?

 

[trs96]

I do not see the Mac OS X drive inside Clover, however in the bios it is visible(however can not boot off of the drive)

Do you have hfsplus.efi in the driversUEFI folder ?

 

[P1LGRIM]

It's a nvme ssd

May need NVMeFix. (probably not if you have already successfully installed the OS).

 

[trs96]

What graphics card are you using?

You've got the less desirable GK106 core in your card. Can be problematic.

 

[reppie]

You've got the less desirable GK106 core in your card. Can be problematic.

View attachment 506042

Oh balls. I was hoping it was the 104 or whatever it is. Where did you find that information, out of interest?

I'm also using legacy boot mode as I've not tried flashing the BIOS to UEFI, maybe that's why the volume isn't appearing in Clover... I did think Catalina might be a stretch on this config (running El Cap)

 

[trs96]

Where did you find that information, out of interest?

www.gpuzoo.com

 

[reppie]

Hi everyone

First time hackintoshing here, So I have installed Catalina on my
i5-3570k w/ Gigabyte Z68 mobo(Sandy bridge)

After installation, I do not see the Mac OS X drive inside Clover, however in the bios it is visible(however can not boot off of the drive)

It's a nvme ssd I have (shouldnt be a problem)

Was wondering if anyone could give me some pointers here?

Thank you very much

Are you using the legacy boot mode as well, or have you updated your board BIOS to UEFI?

 

[kazukiturbo]

Same problem here, Z68x-UDH3-B3 rev 1.0. Boot options available when booting from USB fine, albeit only on one monitor. What graphics card are you using?

Im using radeon sapphire rx580, the mobo came with UEFI so UEFI it is.
It's weird after I tried to edit the config.plist
My clover is werid, it doesn't display any of the harddrives anymore

I tried recreating the usb boot disk, it doesn't boot into the USB unless i do override from the boot menu.

 

[Feartech]

Im using radeon sapphire rx580, the mobo came with UEFI so UEFI it is.
It's weird after I tried to edit the config.plist
My clover is werid, it doesn't display any of the harddrives anymore

I tried recreating the usb boot disk, it doesn't boot into the USB unless i do override from the boot menu.

zip and upload your efi so someone can take a look