Installation Stuck at apple logo with multi color ball in one corner.

[JayVaghasiya]

I have tried inject intel alone in graphics with option igfakeid: 0x04128086 and igplatformid: 0x0a260006. I also disabled graphics card using GraphicsEnabler=No. installation was stuck at apple logo for around 2 hours. I tried it using verbose and safe mode. here is snapshot of error.
https://drive.google.com/open?id=0B92d1lF3BpbBc0x0Wkd6a3I0aHM

 

[P1LGRIM]

I have tried inject intel alone in graphics with option igfakeid: 0x04128086 and igplatformid: 0x0a260006. I also disabled graphics card using GraphicsEnabler=No. installation was stuck at apple logo for around 2 hours. I tried it using verbose and safe mode. here is snapshot of error.
https://drive.google.com/open?id=0B92d1lF3BpbBc0x0Wkd6a3I0aHM

There is no requirement to host your images / files on third party sites - You may attach them to your posts here.

GraphicsEnabler=Yes/No is for the Chimera boot loader and is not valid in Clover.

Is your computer a Laptop ?

 

[JayVaghasiya]

There is no requirement to host your images / files on third party sites - You may attach them to your posts here.

GraphicsEnabler=Yes/No is for the Chimera boot loader and is not valid in Clover.

Is your computer a Laptop ?

I have laptop and I also tried nv_disable=1

 

[P1LGRIM]

Not a Desktop - Moved to Laptop Support.

 

[RehabMan]

I have tried inject intel alone in graphics with option igfakeid: 0x04128086 and igplatformid: 0x0a260006. I also disabled graphics card using GraphicsEnabler=No. installation was stuck at apple logo for around 2 hours. I tried it using verbose and safe mode. here is snapshot of error.
https://drive.google.com/open?id=0B92d1lF3BpbBc0x0Wkd6a3I0aHM

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"