sorry, made a mistake. i have no dgpu on the laptop.Have you tried the second disable dGPU method from the doortania guide?
Quoting @frozenzero123 so he sees it. Maybe you could try this out and see if it works?sorry, made a mistake. i have no dgpu on the laptop.
btw, if anyone has the problems with sleep on ice lake laptops (i am not sure it's gonna fix for G1 graphics) - here is the fix of that problem. finally sleep is working super stable. have tested for 10 cycles of wake and sleep, also power management is good at sleep - over the night (10hrs+) my battery discharged from 100% to 96% (only 4% lost).
https://github.com/acidanthera/bugtracker/issues/1207 (in my case -noDC9 worked, you can try another one too. use only one of them)
p.s. - also, try to change default framebuffer to another one (test all of them to check which one working more stable in your laptop)
he has i7-1065G7, so it's should work. also, he has AOAC enabled by default, so that's might be the problem. I have the setting in BIOS to turn on AOAC, so sleep is working properly even with AOAC enabled, without any special SSDTs or patches. So, it might work.Quoting @frozenzero123 so he sees it. Maybe you could try this out and see if it works?
Im very new to all this hackintosh stuff, i own S740 I7-1065G7 intel AX wifi and Samsung SSD.
Problem is i dont understand ANYTHING you guys are saying and i have 2 questions
-Can someone link me some guide i can follow to install this and what files i should use?
-Can i go back to windows anytime by booting windows from USB ?
there are 2 options already in place if you are unable to disable CFG lockI assume this guide can help me https://www.tonymacx86.com/threads/guide-booting-the-usb-installer-using-opencore.296375/ ?
But now i have question about these two quotes from OPs guide
- CFG lock: must change（important! Must be done！）
- DVMT: 64M or higher！（important! Must be done！）
Where do i change those? In my bios i dont see those options ?