- Joined
- Jul 3, 2012
- Messages
- 71
- Motherboard
- ASUS Z270 IX HERO
- CPU
- i7-7700k
- Graphics
- Asus GTX 980ti STRIX
I've just put together a new Kaby Lake build with these specs:
Asus IX HERO Z270
7700k
ASUS 980ti
I've created an SSDT for USB port injection. (attached)
It successfully limited OS to <15 ports. (attached)
But there seems to be inconsistent USB power to my ports.
I tested with an external HDD and roughly 1 in 4 times plugging it in, it would not be recognized by the computer.
Also, my bluetooth dongle eventually disconnects (squiggly line), on a couple of the USB ports, after roughly 1 minute.
Note: Not sure if this is relevant, but in my System Information -> USB, It only shows USB3 ports (see attached), but I have included several USB2 ports in my SSDT as well.
Any help would be much appreciated
Asus IX HERO Z270
7700k
ASUS 980ti
I've created an SSDT for USB port injection. (attached)
It successfully limited OS to <15 ports. (attached)
But there seems to be inconsistent USB power to my ports.
I tested with an external HDD and roughly 1 in 4 times plugging it in, it would not be recognized by the computer.
Also, my bluetooth dongle eventually disconnects (squiggly line), on a couple of the USB ports, after roughly 1 minute.
Note: Not sure if this is relevant, but in my System Information -> USB, It only shows USB3 ports (see attached), but I have included several USB2 ports in my SSDT as well.
Any help would be much appreciated