- Joined
- Aug 17, 2017
- Messages
- 307
- Motherboard
- ASUS Prime X299 Edition 30
- CPU
- i9-10980XE
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
I checked and noticed that it is one of my old experimental SSDT to force hotplug.no, at the time, before I managed to get my Antelope D8SC to work I had tried to flash my card (CH341A)
but with the modified firmwares but it no longer worked.
so I put back the original firmware from the backup.
In fact this happens because I have inserted the "PCI-Thunderbolt One" DSM Method on DSB1 which conflicts with the DSM Methods present upstream.My Antelope card is recognized as an Express Card in the report system as when it worked.
Use this attached, and if your devices are usually turned off during boot, disable Thunderbolt Boot Support on the BIOS.
Also add the DTGP SSDT.
Thunderbolt Boot Support: Used to connect devices that automatically turn on at boot such as a Dock, but prevents hotplug if the devices are turned off.