NorthAmTransAm
Moderator
- Joined
- Jul 26, 2018
- Messages
- 2,042
- Motherboard
- MSI Pro Z690-A DDR4
- CPU
- i7-12700k
- Graphics
- RX 580
- Mac
- Mobile Phone
I tired that, indeed made things better in the sense that I can now connect and disconnect USB C and TB devices. But it did have the effect of causing the occasional reboot upon connection.
There is also another weird effects:
1. I have a lenovo TB3 dock, which has a TB dispaly port and some USB ports. Before the tbtforcepower and THunderBoltReset, I was not able to hotplug devices, but if I booted with the dock in place, it recognized the docks USBs (but not TB). Now, it only sees the TB and not USB. I tired looking at IOReg, and didn't find any of the USBs. Here is a picture if the dock connected to the Yoga
View attachment 438316
and the same dock connected to a real mac
View attachment 438317
2. There is no TB in the PCI controller (there used to be)
View attachment 438318
3. I tired undoing your EFI and ktex and revert back to the old method (that didn't support hotplug but had PCI and some of the other devices) so take some pictures but it didn't work. The TB dock never appeared in PCI. Any ideas?
Thanks,
Daniel
Interesting. Hey, you should add your hardware to your profile btw. It'll help those helping you.
Shut down, unplug the dock, boot, shut down, plug in the dock then reboot and see if it returns to the normal.
This could be a bios setting issue as well. For me disabling SWI Notify On Hotplug fixed mine. Or something similar.