- Joined
- Oct 28, 2016
- Messages
- 5
- Motherboard
- GA-Z97X-Gaming 3
- CPU
- Intel i7 4790k
- Graphics
- MSI GTX 970
- Mac
- Mobile Phone
Motherboard: GIGABYTE GA-Z97X-GAMING 3 REV 1.0
Micro: INTEL I7 4790K
Graphics: MSI GTX 970
RAM: KINGSTONE HIPER X 8GB
SSD: OCZ 240 GB
WI-FI: TO BE DETERMINED
So here i am. 4 years ago i had an AMD based PC and tried (unsuccesfully of course) to install macOS on that one. Since last year i had this one, now with win 10 installed and i though "why not give it a try now?". I started with unibeast and Mavericks OS and i coulden't go through the unibeast step bc some USB stick incompatibility (i guess). Next i tried with Os Sierra following the official guide of Tonymacx86 and i had a lot of progress.Micro: INTEL I7 4790K
Graphics: MSI GTX 970
RAM: KINGSTONE HIPER X 8GB
SSD: OCZ 240 GB
WI-FI: TO BE DETERMINED
I set the BIOS following some guides with fellows with a similar model than mine:
Bios Settings
Load optimal settings
Set Vt-d disable
Load optimal settings
Set Vt-d disable
Load Optimized Defaults
XHCI Mode=Smart Auto
XHCI Mode=Smart Auto
EHCI Handoff=enabled
XHCI Handoff=enabled
My first try the booting sequence crashed on the apple logo. Second one i succesfully started the macOS Sierra installer. The installation process crashed on the 6th minute remaining bc of some hardware incompatibility which i solved; i had installed an PCI wifi card MSI P60G-B.
So i started multibeast and did my beast, like a blindfolded guy on a bazaar. Installed all the Fakesmc kexts and the ones i thought i needed bc, audio, usb ports, etc. At the end of the unibeast the program set my pc as imac 14,1 () and i restarted the pc. I couldn't start macOS without the usb stick, when i try to start the OS booting from the SSD the system crashes at the apple logo
I tried booting with "flags" -x -v -f nv_disable=1, GraphicsEnabler=no, and so on, nothing seemed to work. Maybe im doing all wrong. This is my first time on someting alike and i dont really know where to put these "flags" so i tried on the options of the clover bootloader some boot args or something. When i putted the flags there, there was changes but no progress.
here's some fullscreen of the crash point
Now im stuck here. if anyone can help me i woul'd be more than grateful
XHCI Handoff=enabled
My first try the booting sequence crashed on the apple logo. Second one i succesfully started the macOS Sierra installer. The installation process crashed on the 6th minute remaining bc of some hardware incompatibility which i solved; i had installed an PCI wifi card MSI P60G-B.
So i started multibeast and did my beast, like a blindfolded guy on a bazaar. Installed all the Fakesmc kexts and the ones i thought i needed bc, audio, usb ports, etc. At the end of the unibeast the program set my pc as imac 14,1 () and i restarted the pc. I couldn't start macOS without the usb stick, when i try to start the OS booting from the SSD the system crashes at the apple logo
I tried booting with "flags" -x -v -f nv_disable=1, GraphicsEnabler=no, and so on, nothing seemed to work. Maybe im doing all wrong. This is my first time on someting alike and i dont really know where to put these "flags" so i tried on the options of the clover bootloader some boot args or something. When i putted the flags there, there was changes but no progress.
here's some fullscreen of the crash point
Now im stuck here. if anyone can help me i woul'd be more than grateful