- Joined
- May 12, 2017
- Messages
- 18
- Motherboard
- MSI Z270 Gaming Pro Carbon
- CPU
- i5-7600
- Graphics
- RX 550
- Mac
- Mobile Phone
Hello everybody,
EDIT : I successfully built that Hackintosh and everything seems to work fine except audio + I have some slowness after waking up the machine from sleep. I plan to edit that post to make "success guide" for people struggling with Z270 MSI MB + GTX 1060 Graphic card.
--- Old post start here ---
I'm reading the tonymacx86 forums and other Hackintosh blogs since a couple of days. I recently built a computer with MSI Z270 Gaming Pro Carbon Mother Board + i5 7600 + MSI GeForce 1060 3G.
By combining many tutorials, I managed to install macOS Sierra. I used UniBeast and could boot on macOS Sierra. But then :
1. I have problems with my display (resolution is not the good one working in 13xx instead of 1920x1080), so I supposed that's because I did not install the NVIDIA Web Drivers, so I've done it (and modifying Clover config.plist for NVIDIA Web Drivers)
2. I used Multibeast after installation.
But after those changes, I was not able to boot again. I mainly follow this tutorial : https://www.tonymacx86.com/threads/...-series-board-with-kabylake-processor.218494/
I already tried 3 times to install macOS Sierra, and each time, same result : I'm able to boot macOS Sierra with poor displaying then I tried to fix that and go ahead with NVIDIA Drivers and Multibeast and I'm not able to boot again.
So I think I'm misunderstanding some points so I would ask a few questions about Hackintosh installation. I would be a pleasure to also read good advises from you.
1. With my configuration, what tools should I use ? UniBeast or Clover only ? MultiBeast ? KextBeast ?
2. What is the exact process that I am supposed to follow ? Create Bootable USB with UniBeast => FakeCPUIP by modifying config.plist => Boot and Install Sierra (the actual point I reached) => "Patch" with MultiBeast => Modifying the Clover config.plist (on new macOS Sierra EFI) => Install NVIDIA Drivers... I'm totally lost about what to do, how, and when...
3. I read some people booting without any graphic card. My question about that is : Am I supposed to boot with my GeForce 1060 (what I've actually done : my screen plugged on my GeForce 1060) ? Or I am supposed to install my integrated HD630 first and then I will install the GeForce. Can we use / install booth of them (I don't think so but would like to know).
4. Finally : what the purpose of each of the tools everybody uses : UniBeast, MultiBeast, KextBeast, Clover, Clover Configurator ? Is there any others to do what they do ?
To conclude : according to my configuration, what am I supposed to do to make macOS Sierra running on my Desktop PC (I mean step by step) ? How should I boot / install for the first time (NVIDIA Card or Integrated), why and what for should I use MultiBeast ? What drivers am I supposed to install ? Please help a lost noob
--- Old post end here ---
Thank you all in advance,
Kuaaaly
EDIT : I successfully built that Hackintosh and everything seems to work fine except audio + I have some slowness after waking up the machine from sleep. I plan to edit that post to make "success guide" for people struggling with Z270 MSI MB + GTX 1060 Graphic card.
--- Old post start here ---
I'm reading the tonymacx86 forums and other Hackintosh blogs since a couple of days. I recently built a computer with MSI Z270 Gaming Pro Carbon Mother Board + i5 7600 + MSI GeForce 1060 3G.
By combining many tutorials, I managed to install macOS Sierra. I used UniBeast and could boot on macOS Sierra. But then :
1. I have problems with my display (resolution is not the good one working in 13xx instead of 1920x1080), so I supposed that's because I did not install the NVIDIA Web Drivers, so I've done it (and modifying Clover config.plist for NVIDIA Web Drivers)
2. I used Multibeast after installation.
But after those changes, I was not able to boot again. I mainly follow this tutorial : https://www.tonymacx86.com/threads/...-series-board-with-kabylake-processor.218494/
I already tried 3 times to install macOS Sierra, and each time, same result : I'm able to boot macOS Sierra with poor displaying then I tried to fix that and go ahead with NVIDIA Drivers and Multibeast and I'm not able to boot again.
So I think I'm misunderstanding some points so I would ask a few questions about Hackintosh installation. I would be a pleasure to also read good advises from you.
1. With my configuration, what tools should I use ? UniBeast or Clover only ? MultiBeast ? KextBeast ?
2. What is the exact process that I am supposed to follow ? Create Bootable USB with UniBeast => FakeCPUIP by modifying config.plist => Boot and Install Sierra (the actual point I reached) => "Patch" with MultiBeast => Modifying the Clover config.plist (on new macOS Sierra EFI) => Install NVIDIA Drivers... I'm totally lost about what to do, how, and when...
3. I read some people booting without any graphic card. My question about that is : Am I supposed to boot with my GeForce 1060 (what I've actually done : my screen plugged on my GeForce 1060) ? Or I am supposed to install my integrated HD630 first and then I will install the GeForce. Can we use / install booth of them (I don't think so but would like to know).
4. Finally : what the purpose of each of the tools everybody uses : UniBeast, MultiBeast, KextBeast, Clover, Clover Configurator ? Is there any others to do what they do ?
To conclude : according to my configuration, what am I supposed to do to make macOS Sierra running on my Desktop PC (I mean step by step) ? How should I boot / install for the first time (NVIDIA Card or Integrated), why and what for should I use MultiBeast ? What drivers am I supposed to install ? Please help a lost noob
--- Old post end here ---
Thank you all in advance,
Kuaaaly
Last edited: