Contribute
Register

iMac Pro X299 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

Status
Not open for further replies.

kgp

Retired
Joined
May 30, 2014
Messages
6,902
Motherboard
ASUS WS X299 Sage 10G
CPU
i9-7980XE
Graphics
Vega 64
Mac
iMac, MacBook Pro, Mac mini
Mobile Phone
iOS
I tried using the Nvidia driver repackager, but I still can't get the Nvidia web drivers to load. The option is grayed out in System Preferences.

Also, I can't get USB 3 drives to work. I implemented the USB port patch in the guide and have the kext installed as well.
I got the Nvidia drivers to load by using boot arguments "-ngfxcompat=1" and "-ngfxbeta". Graphics kind of break up/stutter a bit as it draws on the screen. Not really usable.

Still no USB 3.

IOReg and config attached.
Screenshot 2018-06-29 at 09.19.41.png


Which XHC USB kext are you using? At my side everything is properly implemented.. you just have one SS port implemented. Looks like you port limit patch is not working, although the correct one is implemented in your config.plist attached.
 
Last edited:
Joined
Jul 16, 2013
Messages
429
Motherboard
Asus Prime X299-Deluxe
CPU
i9-7900X
Graphics
Radeon VII
I’m using your latest KGP-iMacPro-XHCI.kext from the 10.13 thread. I downloaded the one attached to this thread and they have the same date and time so I’m assuming they are the same with no changes, right?

The only changes with my EFI from 10.13 to 10.14 is the config.plist.
 

kgp

Retired
Joined
May 30, 2014
Messages
6,902
Motherboard
ASUS WS X299 Sage 10G
CPU
i9-7980XE
Graphics
Vega 64
Mac
iMac, MacBook Pro, Mac mini
Mobile Phone
iOS
I’m using your latest KGP-iMacPro-XHCI.kext from the 10.13 thread. I downloaded the one attached to this thread and they have the same date and time so I’m assuming they are the same with no changes, right?

The only changes with my EFI from 10.13 to 10.14 is the config.plist.
Well... if your EFI from 10.13 also implements Clover_v2.4k_r4581.... Nevertheless, using my latest EFI-Folder distribution with 10.14 PB1 port limit patch + KGP-iMacPro-XHCI.kext, all XHC USB ports are properly implemented, which is not your case.
 

trs96

Moderator
Joined
Jul 31, 2012
Messages
14,799
Motherboard
GA-Z97X-UD3H-BK
CPU
i5-4690K
Graphics
HD4600 / RX 570
Mac
iMac, Mac mini
Mobile Phone
Android
X299 10.14 Mojave Guide Setup completed


The new game can start over :thumbup:

Enjoy and have fun,

View attachment 337988
Nice work on this Post Doctoral Hackintosh Guide. The best high end hackintosh guide on planet Earth. :thumbup:
Maybe even in the whole Milky Way galaxy...
 
Last edited:
Joined
Mar 18, 2017
Messages
514
Motherboard
Asus Prime X299 Deluxe
CPU
i9-7940X
Graphics
2x Vega 56
Mac
iMac, Mac mini
Mobile Phone
iOS
Nice day (not on road race bike maybe I'm too old ...) but success on MacOs Mojave PB1 with this new guide thanks KGP :thumbup: :

All works fine ;) :D

Realy live the future !
 

Attachments

Last edited:
  • Like
Reactions: kgp
Joined
Jun 9, 2018
Messages
7
Motherboard
Asus Prime X299 A
CPU
i7-7800X
Graphics
GTX 1080 Ti
Mobile Phone
iOS
@kgp thank you very much!
 
Last edited:
Joined
Jul 16, 2013
Messages
429
Motherboard
Asus Prime X299-Deluxe
CPU
i9-7900X
Graphics
Radeon VII
Well... if your EFI from 10.13 also implements Clover_v2.4k_r4581.... Nevertheless, using my latest EFI-Folder distribution with 10.14 PB1 port limit patch + KGP-iMacPro-XHCI.kext, all XHC USB ports are properly implemented, which is not your case.
I was able to get USB 3 working by backing up my config.plist for High Sierra and renaming the Mojave config.plist from "config-mojave.plist" to "config.plist". Seems with Clover the kext patches are loaded before the Clover screen. Defeats the purpose of being able to select the config.plist to use in the Clover menu.

Now if only we could get better Nvidia Pascal graphics support...
 
Status
Not open for further replies.
Top