- Joined
- Feb 16, 2013
- Messages
- 24
- Motherboard
- MSI Z370-A PRO
- CPU
- i7 8700K
- Graphics
- Vega 64
- Mac
- Mobile Phone
Hi there!. Want to share information. HS 10.13.3 was successfully installed on this configuration.
The problem was with audio (ALC892). Solved with:
1) MultiBeast> Drivers> Audio> Realtek ALCxxx> ALC892 - reboot(may not be necessary)
2) 200/300 series/x299 Audio DeviceID Patch
3) https://bitbucket.org/RehabMan/os-x-eapd-codec-commander/downloads/ for "no audio after sleep"
the system did not recognize the processor, but sees 6 cores-12 threadsView attachment 318643
I'm editing video in Final Cut Pro X, and after the installation and test it and turned out that FCPX works much worse than on 10.12.6. Frames drop on the video, which before on 10.12.6 played normally! (This was on the previous build (Z77-ds3h) + 3770 + 1050Ti+10.13.3 to), but I thought it was because of the old processor.)
I decided to go back to 10.12.6. I had a SSD with installed 10.12.6 system.
Updated Clover, installed keksts - everything is fine. FCPX works perfectly. Can anyone encounter such problem? Where to look?
In FCPX on 10.12.6 doesn't work 3D tytles
Update
Finally, I can get fully working version of MAC OSX with the 3d titles in FCPX!
Version - 10.13.4.
USB 3.0 MultiBeast+ https://www.tonymacx86.com/threads/macos-10-13-4-update.248292/page-9#post-1718100
Video driver https://github.com/Benjamin-Dobell/nvidia-update/blob/master/README.md
For sound use Voodoo
Everything works perfectly
The problem was with audio (ALC892). Solved with:
1) MultiBeast> Drivers> Audio> Realtek ALCxxx> ALC892 - reboot(may not be necessary)
2) 200/300 series/x299 Audio DeviceID Patch
3) https://bitbucket.org/RehabMan/os-x-eapd-codec-commander/downloads/ for "no audio after sleep"
the system did not recognize the processor, but sees 6 cores-12 threadsView attachment 318643
I'm editing video in Final Cut Pro X, and after the installation and test it and turned out that FCPX works much worse than on 10.12.6. Frames drop on the video, which before on 10.12.6 played normally! (This was on the previous build (Z77-ds3h) + 3770 + 1050Ti+10.13.3 to), but I thought it was because of the old processor.)
I decided to go back to 10.12.6. I had a SSD with installed 10.12.6 system.
Updated Clover, installed keksts - everything is fine. FCPX works perfectly. Can anyone encounter such problem? Where to look?
In FCPX on 10.12.6 doesn't work 3D tytles
Update
Finally, I can get fully working version of MAC OSX with the 3d titles in FCPX!
Version - 10.13.4.
USB 3.0 MultiBeast+ https://www.tonymacx86.com/threads/macos-10-13-4-update.248292/page-9#post-1718100
Video driver https://github.com/Benjamin-Dobell/nvidia-update/blob/master/README.md
For sound use Voodoo
Everything works perfectly
Last edited: