Contribute
Register

i7-4930K - Asus Rampage IV Extreme - 32GB RAM - GTX 770 4GB [Success!!]

Joined
Jan 4, 2013
Messages
147
Motherboard
Gigabyte Z390 AORUS Pro
CPU
i9-9900K
Graphics
2 x Vega 64
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
Slighty OT: replaced case.
I fit the Rampage IVBE+ Corsair H80i V2 + XFX RX480 + Corsait HX 850i + 1HDD + 2 SDD + 2 NVME SSD in a very very small small case: Riotoro CR1088.
Now my computer with the eatx mobo... is small as a CustoMac MicroATX :clap::clap::clap::clap::clap::clap::clap::clap::clap::clap::clap::clap:
Note: cable management is a bet...! But with a lot of patience is possible!
I added 2 small 8cm fan and keep the HX850i fan spinning at 40% (always on) for thermal stability.
All is right!
1.jpg 2.jpg
 
Last edited:
Joined
May 13, 2016
Messages
21
Motherboard
Asus P6T SE
CPU
W3690
Graphics
GTX 760
Mac
  1. iMac
Mobile Phone
  1. iOS
hello, how did you install the U3S6 card under macos 10.13? I can not find the right KEXT. thank you very much
 
Joined
Jan 24, 2013
Messages
18
Motherboard
ASRock X299 OC Formula
CPU
i9-9900X OC @4.7 GHz
Graphics
3x GTX 1080 Ti
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Currently helping a friend rebuild his Rampage IV Extreme. I'm in 10.12.6 with most things working perfectly. However, even with the genericUSB kext from rehab man, I get no activity from the onboard USB 3 ports. A PCIe USB 3 card is working but I hoped they all could work. I fiddled around with enabling and disabling Asmedia USB3 from the bios but still no luck. I also dug around for hours searching forums for any fixes and they all came up not working. I fear the kext has been broken by Apple's updates. Has anyone else had luck with onboard USB 3 for the R4E in 10.12.6?
 
Joined
Jun 28, 2018
Messages
7
Motherboard
Asus Rampage IV Formula
CPU
i7-3820
Graphics
GTX 970
Everything working on my Asus Rampage IV Formula.
Intel i7-3820, GTX 970, 16Gb RAM and Areca 1882.
Sierra 10.12.6
Amazing Guide Shilohh. Thank you.

... Has anyone else had luck with onboard USB 3 for the R4E in 10.12.6?
You have to copy RehabMan GenericUSBXHCI.kext from EFI/CLOVER/kexts/Others to EFI/CLOVER/kexts/10.12 on EFI partition. It needs to be in both folders.
But USB3 works only if you have your USB3 device connected prior boot. No hot swap.

Can anybody PLEASE confirm if Inateck kt 4006 works OOB ? (I need hot swap)
Thank you.
 
Joined
Jun 28, 2018
Messages
7
Motherboard
Asus Rampage IV Formula
CPU
i7-3820
Graphics
GTX 970
I can now confirm myself:
Inateck KT 4006 works OOB, full speed and hot swap.
 
Joined
Mar 11, 2016
Messages
21
Motherboard
Asus Rampage IV Black Edition
CPU
i7-4930K OC @4.4GHz
Graphics
RX 580
Mac
  1. MacBook Pro
  2. Mac Pro
Classic Mac
  1. Power Mac
Upgraded to 10.13.6 .. Same issue here. Sleep/Wake not working. Upon wake, get a black screen and the machine is hung. Have to hold power button and power cycle the entire box. Realize this has been a plaguing issue with this build and High Sierra, so if anybody has a solution or tips, please post.
 
Joined
Mar 11, 2016
Messages
21
Motherboard
Asus Rampage IV Black Edition
CPU
i7-4930K OC @4.4GHz
Graphics
RX 580
Mac
  1. MacBook Pro
  2. Mac Pro
Classic Mac
  1. Power Mac
Never bothered to use onboard Wifi or Bluetooth since I prefer using ethernet. Anyway, running 10.13.6 and can't seem to get Wifi and Bluetooth up and running. Board is R4BE with latest bios.

In /EFI/CLOVER/KEXT/OTHER, I put the following Kexts in:

1. FakePCIID_Broadcom_WiFi.kext
2. FakePCIID.kext
3. BrcmPatchRAM2.kext
4. BrcmFirmwareRepo.kext

Rebooted, then went into BIOS and enabled Wifi. System will restart then boot. Apple icon and load progress will show briefly, then the box goes into a reboot.

Questions:

1. Should I be putting these Kexts into /S/L/E ????
2. Wanted to get Wifi working first, so only enabled that in Bios. Should I be enabling BOTH Wifi and Bluetooth?

Notes: Downloaded and using the latest Kexts (listed above) from the GitHub repository.

Anybody have any suggestions on what I'm missing or doing wrong here?

TIA!
 
Top