i7-4770k + Asus z97 deluxe + GTX 780 + Asus 4K Monitor

[alanh5004]

My new build is:

i7-4970k + Asus Z97 Gryphon + GTX680

My motherboard has ALC892 audio and I used Multibeast 6.3.1 and installed the ALC892 drivers and 9 Series chipset audio patch. I still do not have audio out.

need to change sound output from internal speakers to line out in system
and only black or orange rear jacks have sound output

 

[muchmore]

need to change sound output from internal speakers to line out in system
and only black or orange rear jacks have sound output

At the time I wrote my post, I did not have any choices in the sound preference pane like line out. Since then, I was able to fix my NVRAM, which fixed my Messages application, in addition, it allowed my sound preference pane to work. With that in mind, I am using the "black" audio output on my motherboard and have one of the Line-Out's selected in the audio pref pane. Audio is working, but it still is not perfect - I experience very low audio volumes. Luckily, Tony and team are working on the audio for the Z97 chipset and so I anticipate that this will be corrected in the future.

 

[cmpugay]

My Build config is :

Asus Z97 Deluxe
Corsair Vengenance 2133 MHZ - 32 GB RAM
NVidia GTX650Ti Boost Graphics
Dell U2410 Display

After installation and performing the steps mentioned in first post, I'm still not able to access Network.

In OSX it is still showing Ethernet Failed.

Pls. help.

 

[MacFanatic76]

Install AppleIntelE1000e.kext, this will give you a working LAN/Internet.

@ Erik - thanks a lot for your guide !

Has anyone got proper power management, sleep+wake on this board with Clover ?
I use this same mobo, with a 4770K and an EVGA GTX780 Ti, but still cannot
get that.

If anyone's interested, I can provide what I've experienced so far
(and that is clover with SSDT which seems to be working properly, no sleep though).

 

[nativos]

Hello, right now I'm installing Yosemite configuracióm on same basics as the have 100% operational, early will put it in the forum.

thanks! from Spain!

 

[antOlogique]

Hi there,
Amazing rig !

I'm using the same motherboard with 10.9.5.
I don't really understand what is the device/vendor IDs of the wifi card... Where can I find it ?
How did you get it work ? ( what about the BT ??? )

Thanks for any help about this combo question !

Z97 deluxe
i7 4770K
32 go Corsair
intel HD 4600

 

[sinolux]

i7 4790K - Asus Z97 Deluxe - 32Gb Corsair Vengeance (4x8Gb)

Following this thread:
http://www.tonymacx86.com/user-buil...board-ac-wifi-bluetooth-4-0-secure-drive.html

I've tried installing Mavericks with Unibeast but got stuck at first screen
Downloaded and installed Yosemite and been able to overcome the first screen issue,
now I've got Yosemite working, (seems stable) but no Bluetooth, sound nor WIFI
any suggestion?

Thanks

 

[Critycal]

"WiFi card:
Just edit: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortBrcm4360.kext/Contents/Info.plist ,
and add your device/vendor IDs, for example this is mine: <string>pci14e4,43b1</string>.
it works just great. Repair pPermissions with any related application (Disk Utility) and reboot."

Where do i find the vendor id
and where exactly do i add in the info.plist

thanks