i3-4130 GA-H87N-WIFI HD4400 Graphics not supported

[sidouglas]

Graphics is not supported - “Unknown 64 MB of Shared System Memory"

I am seriously starting to spin my wheels here and frustration is building.

I have followed along the tutorial from http://www.tonymacx86.com/golden-bu...re-i3-4340-intel-hd-4600-a-13.html#post668586


* Installed the MB config file from that post (CustoMacMini-DSDT-Free.mb)
Bios settings:
IGFX enabled: http://imgur.com/t6CJPrF
Profile saved as Profile 1 : http://imgur.com/tAi6qNA
Intel Vd-t disabled : http://imgur.com/VHRR6vl
XMP disabled : http://imgur.com/vpxb8UI

Post install:
Update to 2013 Network installation as reported in the original tutorial : http://imgur.com/iTDCLEr
Multibeast installation configuration : http://imgur.com/JwHkwNC
Result : http://imgur.com/BGwFL9D ( no GRAPHICS!! )

What have I missed?

 

[sidouglas]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

bump.

 

[sidouglas]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

bump

 

[sidouglas]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

bump

 

[stehor]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

change dvmt total memory size to 256mb use dvi or hdmi cables. use flag GraphicsEnabler=Yes

 

[sidouglas]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Hi stehor.
Yeah I tried your suggestion and it made no difference. Also tried patching the kexts from this page too ( http://www.osx86.net/files/file/3568-new-109-intel-hd-3000-hd-4000-driver/ )
plist now looks like this:

<key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GraphicsEnabler</key>
    <string>Yes</string>
    <key>IntelAzulFB</key>
        <string>12</string> <--- tried a few variations here ( no effect 1 — 11 )
    <key>Kernel</key>
    <string>mach_kernel</string>
    <key>Kernel Flags</key>
    <string></string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>Timeout</key>
    <string>2</string>
        <key>GenerateCStates</key>
        <string>Yes</string>
        <key>GeneratePStates</key>
        <string>Yes</string>
        <key>UseKernelCache</key>
        <string>Yes</string>
        <key>Graphics Mode</key>
        <string>"1920x1080x32"</string>
    <key>PCIRootUID</key>
    <string>0</string>
    <key>IGPlatformID</key>
    <string>0c260000</string> <--- apparently this is the default
    <key>IGPEnabler</key>
    <string>Yes</string>

 

[Adrian B]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

If you are using MultiBeast and Chimera (default boot loader) then you need to use these values
http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html


Good Luck

Adrian B

 

[giacomorebonato]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Same problem here. Still don't have a solution

 

[Adrian B]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Same problem here. Still don't have a solution

• What is the motherboard revision number? Have you tried to remove the WIFI card before attempting installation
• What have you tried, which cable are you using for graphics - is it DVI-D or HDMI. VGA does not work.
• What is the resolution of your monitor?
• MultiBeast settings?
• Which i7 processor are you using? Non 'k' models require UEFI option of VT-d to be disabled.

Adrian B

 

[sidouglas]

i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Hi Adrian

If you are using MultiBeast and Chimera (default boot loader) then you need to use these values
http://www.tonymacx86.com/378-new-in...s-chimera.html

I have exhaustively tried the IGPlatformID= XXXXXXXX method in org.chameleon.Boot.plist. Numerous values.

It makes no difference. I make the edit. Save the file. Reboot. The hackintosh remains the same. No Quartz acceleration, and no means to increase the display resolution (1024x768). Still the "Graphics not supported" message in the System Report. I have the display linked via DVI-D. Tried the HDMI port ( that works too ) but same problem.

Do I need to do anything other than save the plist file in order for things to "stick"?