Contribute
Register

i3-4130 GA-H87N-WIFI HD4400 Graphics not supported

Status
Not open for further replies.
Joined
Jan 31, 2014
Messages
21
Motherboard
Gigabyte GA-H87N-WIFI
CPU
i3-4330
Graphics
HD 4600
Graphics is not supported - “Unknown 64 MB of Shared System Memory"

I am seriously starting to spin my wheels here and frustration is building.

I have followed along the tutorial from http://www.tonymacx86.com/golden-bu...re-i3-4340-intel-hd-4600-a-13.html#post668586


* Installed the MB config file from that post (CustoMacMini-DSDT-Free.mb)
Bios settings:
IGFX enabled: http://imgur.com/t6CJPrF
Profile saved as Profile 1 : http://imgur.com/tAi6qNA
Intel Vd-t disabled : http://imgur.com/VHRR6vl
XMP disabled : http://imgur.com/vpxb8UI

Post install:
Update to 2013 Network installation as reported in the original tutorial : http://imgur.com/iTDCLEr
Multibeast installation configuration : http://imgur.com/JwHkwNC
Result : http://imgur.com/BGwFL9D ( no GRAPHICS!! )

What have I missed? :banghead:

bios-igfx.jpgbios-profile.jpgbios-vd-t-disabled.jpgbios-xmp-disabled.jpgmultibeast-settings.jpgmultibeast-update-to-network(2014).jpgunknown-graphics-card.jpg
 

Attachments

  • org.chameleon.boot.plist.jpg
    org.chameleon.boot.plist.jpg
    946.5 KB · Views: 726
Joined
Feb 3, 2011
Messages
1,352
Motherboard
Gigabyte Z390 AORUS Ultra
CPU
i9-9900K
Graphics
RX 590
i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

change dvmt total memory size to 256mb use dvi or hdmi cables. use flag GraphicsEnabler=Yes
 
Joined
Jan 31, 2014
Messages
21
Motherboard
Gigabyte GA-H87N-WIFI
CPU
i3-4330
Graphics
HD 4600
i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Hi stehor.
Yeah I tried your suggestion and it made no difference. Also tried patching the kexts from this page too ( http://www.osx86.net/files/file/3568-new-109-intel-hd-3000-hd-4000-driver/ )
plist now looks like this:

Code:
<key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GraphicsEnabler</key>
    <string>Yes</string>
    <key>IntelAzulFB</key>
        <string>12</string> <--- tried a few variations here ( no effect 1 — 11 )
    <key>Kernel</key>
    <string>mach_kernel</string>
    <key>Kernel Flags</key>
    <string></string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>Timeout</key>
    <string>2</string>
        <key>GenerateCStates</key>
        <string>Yes</string>
        <key>GeneratePStates</key>
        <string>Yes</string>
        <key>UseKernelCache</key>
        <string>Yes</string>
        <key>Graphics Mode</key>
        <string>"1920x1080x32"</string>
    <key>PCIRootUID</key>
    <string>0</string>
    <key>IGPlatformID</key>
    <string>0c260000</string> <--- apparently this is the default
    <key>IGPEnabler</key>
    <string>Yes</string>
 
Joined
Mar 17, 2012
Messages
7,350
Motherboard
Gigabyte GA-B75M-HD3
CPU
i7-3770
Graphics
HD 5570
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. Other
i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Same problem here. Still don't have a solution

  • What is the motherboard revision number? Have you tried to remove the WIFI card before attempting installation
  • What have you tried, which cable are you using for graphics - is it DVI-D or HDMI. VGA does not work.
  • What is the resolution of your monitor?
  • MultiBeast settings?
  • Which i7 processor are you using? Non 'k' models require UEFI option of VT-d to be disabled.


Adrian B
 
Joined
Jan 31, 2014
Messages
21
Motherboard
Gigabyte GA-H87N-WIFI
CPU
i3-4330
Graphics
HD 4600
i3-4330 GA-H87N-WIFI HD4600 Graphics not supported

Hi Adrian
If you are using MultiBeast and Chimera (default boot loader) then you need to use these values
http://www.tonymacx86.com/378-new-in...s-chimera.html

I have exhaustively tried the IGPlatformID= XXXXXXXX method in org.chameleon.Boot.plist. Numerous values.

It makes no difference. I make the edit. Save the file. Reboot. The hackintosh remains the same. No Quartz acceleration, and no means to increase the display resolution (1024x768). Still the "Graphics not supported" message in the System Report. I have the display linked via DVI-D. Tried the HDMI port ( that works too ) but same problem.

Do I need to do anything other than save the plist file in order for things to "stick"?
 
Status
Not open for further replies.
Top