I need to check if CPU PM is implemented

[abodania]

Thank you for your support RehabMan .
Sorry for the late reply .
I think I fixed all problems by following your suggestions , did I get it right ?

My problem now is the cpu usage of the kernel_task is about 200% instead of the normal 1-2% and the system is becoming too slow , this doesn't happen when AC power is plugged in , it only happens when I switch to battery .

 

[RehabMan]

Thank you for your support RehabMan .
Sorry for the late reply .
I think I fixed all problems by following your suggestions , did I get it right ?

My problem now is the cpu usage of the kernel_task is about 200% instead of the normal 1-2% and the system is becoming too slow , this doesn't happen when AC power is plugged in , it only happens when I switch to battery .

Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Hint: Install all kexts, including FakeSMC.kext to /L/E, as per FAQ.

Why are you combining AppleALC.kext and cloverHDA.kext? These two solutions are mutually exclusive.

 

[abodania]

Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Hint: Install all kexts, including FakeSMC.kext to /L/E, as per FAQ.

I installed all kexts including FakeSMC.kext to /L/E , but that causes a kernel Panic

Why are you combining AppleALC.kext and cloverHDA.kext? These two solutions are mutually exclusive.

I removed cloverHDA.kext and installed only AppleALC.kext to /L/E .

 

[RehabMan]

I installed all kexts including FakeSMC.kext to /L/E , but that causes a kernel Panic

No idea when you don't provide any information on which kexts you installed.
(attach a ZIP of all kexts you installed, if you expect me to understand whether you installed current version of each)
And you should attach kextcache output (you checked it, right?)

OsxAptioFix2Drv-free2000.efi not recommended.
See guide for correct driversUEFI content.
You also do not have the recommended RehabMan build of Clover installed (I don't test random sourceforge Clover builds).

https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[abodania]

No idea when you don't provide any information on which kexts you installed.
(attach a ZIP of all kexts you installed, if you expect me to understand whether you installed current version of each)
And you should attach kextcache output (you checked it, right?)

I attached a ZIP of all kext installed + kextcache output.

You also do not have the recommended RehabMan build of Clover installed (I don't test random sourceforge Clover builds).

I installed the latest sourceforge Clover build.

 

[RehabMan]

I attached a ZIP of all kext installed + kextcache output.

I don't see any problem there.
If you suspect installing a kext is causing a problem, install only "essential" kexts initially, then add additional kexts one at a time.

I installed the latest sourceforge Clover build.

I have not tested it.
I use RehabMan builds only.

 

[abodania]

Thank you RehabMan for your patience.

I will do a clean install and use latest RehabMan build of Clover.