- Joined
- Sep 10, 2017
- Messages
- 27
- Motherboard
- Dell Inspiron 5567
- CPU
- Intel® Core™ i7-7500U
- Graphics
- Intel® HD Graphics 620 + AMD Radeon R7 M445
- Mobile Phone
Hi all ,
I need to check if CPU PM is implemented because battery is draining very fast.
I don't even know if discrete gpu is disabled.
Dell Inspiron 5567 I7 Kaby Lake
Intel HD graphics 620
amd radeon r7 m445.
Here are the files.
Thank you .
"Problem Reporting" files are incomplete/wrong (ioreg is not from IORegistryExplorer v2.1).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.
Thank you Rehabman
Here is the file from v2.1
Thank you Rehabman
I followed all of your instructions for disabling-discrete-graphics in the guide , could you please check the attached file .
Note: When I used KabyLake SMBIOS like MacBookPro14,1 as you suggested in this post , the system didn't boot anymore .
https://www.tonymacx86.com/threads/solved-hdmi-audio-for-intel-hd620-skl-spoof.234883/#post-1608241
ACPI configuration is wrong.
Clover is too old.
Update to latest version of RehabMan Clover.
Follow guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/
Done .
Could you please check the attached files.
CPU PM is working... you're using MacBookAir6,2 (which is not HWP enabled, as Haswell CPUs do not have HWP).
Is that your intention?
Note: Your ACPI configuration is still not correct.
Since you have only Intel graphics, there is no need to patch any SSDTs.
What should I use?
I used MacBookAir6,2 as you suggested before.
The system didn't boot when I used MacBookPro14,1.
How to correct that ?
I followed all of your instructions in the guide.
So how could I disable AMD?
Should I disable it only in DSDT?