I need help. My ethernet does not work (Gigabyte Aorus Z370 Gaming 5)

Discussion in 'Network' started by Asiernineu, Jun 14, 2018.

  1. Asiernineu

    Asiernineu

    Joined:
    Jun 9, 2018
    Messages:
    10
    Motherboard:
    Gigabyte Aorus Z370 Gaming 5
    CPU:
    Intel Core i7-8700K 3.7Ghz BOX
    Graphics:
    Gigabyte GTX 1080 G1 Gaming 8GB GDDR5X
    Mac:
    MacBook Pro
    Mobile Phone:
    Android
    Jun 14, 2018 at 3:27 PM #1
    Asiernineu

    Asiernineu

    Joined:
    Jun 9, 2018
    Messages:
    10
    Motherboard:
    Gigabyte Aorus Z370 Gaming 5
    CPU:
    Intel Core i7-8700K 3.7Ghz BOX
    Graphics:
    Gigabyte GTX 1080 G1 Gaming 8GB GDDR5X
    Mac:
    MacBook Pro
    Mobile Phone:
    Android
    Hi friends. I do a Mac High sierra installation in my computer, my setup:

    Gigabyte Aorus Z370 Gaming 5
    Intel Core i7 8700k
    SSD Crucial MSX500 SSD
    Seagate barracuda HDD
    Gigabyte geforce 1080 8gb
    16 gb ram Crucial ballistix

    I have had problems configuring the BIOS. In the end I got a guide and I configured it in the following way:
    BIOS Settings

    1. Save & ExitLoad Optimized Defaults
    2. M.I.T. → Advanced Memory Settings Extreme Memory Profile(X.M.P.) : Profile1
    3. BIOS → Fast Boot : Disabled
    4. BIOS → LAN PXE Boot Option ROM : Disabled
    5. BIOS → Storage Boot Option Control : UEFI
    6. Peripherals → Trusted Computing → Security Device Support : Disable
    7. Peripherals → Network Stack Configuration → Network Stack : Disabled
    8. Peripherals → USB Configuration → Legacy USB Support : Auto
    9. Peripherals → USB Configuration → XHCI Hand-off : Enabled
    10. Chipset → Vt-d : Disabled
    11. Chipset → Wake on LAN Enable : Disabled
    12. Chipset → IOAPIC 24-119 Entries : Enabled
    Based on the GPU you’re using change the following settings:

    Dedicated graphics card:
    1. Peripherals → Initial Display Output : PCIe 1 Slot
    2. Chipset → Integrated Graphics : Disabled
    The installation run OK. I think that internet runs during the instalation, and after multibeast crash. In multibest i Do this:
    1. Quick Start: UEFI Boot mode
    2. Drivers-->Disk -->3rd PArty Sata
    3. Drivers-->Disk -->3rd PArty eSata
    4. Drivers --> Misc -->FAkeSMC
    5. Drivers --> Misc -->FakeSMC Plugins
    6. Drivers --> Misc -->FakeSMC HWMonitor Application
    7. Drivers --> Misc -->NullCPUPPowerManagement
    8. Drivers --> Network --> Intel --> IntelMausiEthernet v2.4.0
    9. Drivers --> USB --> Remove XHCI USB Port Limit
    10. Drivers --> USB --> USBInjectAll
    11. Bootloaders --> Clover UEFI Boot Mode + Emultaed NVRAM
    12. Customize --> System definitions -->IMac --> IMac 18,3
    13. Ciustomize --> Grapichs --> Nvidia graphics fixup

    Now my ethernet don´t run. How can I solve it? Thanks for your time friends.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice