Contribute
Register

HP Zbook Studio G3 SSD NVME

Status
Not open for further replies.
Joined
Oct 27, 2015
Messages
3
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi there,
I'm trying to install Sierra on a HP Zbook Studio G3.
I'm stuck at the disk utility step, as the zbook doesn't recognize the NVMe SSD.

I've tried all guides but nothing is working :
https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/
https://pikeralpha.wordpress.com/2016/06/27/nvmefamily-kext-bin-patch-data/
https://www.tonymacx86.com/threads/os-x-driver-for-nvme-m-2-solid-state-drives-released.181387/

Can anyone help me ?
Here is my clover attached

HP Zbook Studio G3
Intel Core i7
Mobile Intel CM 236 Chipset (Skylake PCH-H)
Intel Core i7-6820HQ 2.7 GHz (Intel Core i7)
Intel Graphics HD 530 - 4096 MB
NVIDIA Quadro M1000M - 4096 MB, Core: 1124 MHz, Memory: 1253 MHz, GDDR5, ForceWare 362.13, Optimus
16 Go RAM DDR4-2133, dual-channel, 2/2 slots used, up to 32 GB
Samsung SM951 256GB M.2 NGFF SSD 8Gb/s x4 MZHPV256HDGL-00000
15.6 inch 16:9, 3840x2160 pixel 282 PPI, Sharp SPH1445, IPS, glossy: no
 

Attachments

  • CLOVER.zip
    1.8 MB · Views: 337
Hi there,
I'm trying to install Sierra on a HP Zbook Studio G3.
I'm stuck at the disk utility step, as the zbook doesn't recognize the NVMe SSD.

I've tried all guides but nothing is working :
https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/
https://pikeralpha.wordpress.com/2016/06/27/nvmefamily-kext-bin-patch-data/
https://www.tonymacx86.com/threads/os-x-driver-for-nvme-m-2-solid-state-drives-released.181387/

Can anyone help me ?
Here is my clover attached

HP Zbook Studio G3
Intel Core i7
Mobile Intel CM 236 Chipset (Skylake PCH-H)
Intel Core i7-6820HQ 2.7 GHz (Intel Core i7)
Intel Graphics HD 530 - 4096 MB
NVIDIA Quadro M1000M - 4096 MB, Core: 1124 MHz, Memory: 1253 MHz, GDDR5, ForceWare 362.13, Optimus
16 Go RAM DDR4-2133, dual-channel, 2/2 slots used, up to 32 GB
Samsung SM951 256GB M.2 NGFF SSD 8Gb/s x4 MZHPV256HDGL-00000
15.6 inch 16:9, 3840x2160 pixel 282 PPI, Sharp SPH1445, IPS, glossy: no

Read here: https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/

Provide all data requested in post #1, "Problem Reporting".

Note: DropOem=true in your scenario (no patched SSDTs in ACPI/patched) is wrong.
 
Thanks but I do have a patched SSDTs in ACPI/patched ! SSDT-NVMe-Pcc.aml

That is not a patched SSDT. That is an "add-on" SSDT.

A "patched" SSDT is where you take an SSDT that exists and "change it".
SSDT-NVMe-Pcc.aml is an "add-on" SSDT. It was created new, not from something that existed.
 
Thank you RehabMan, you're the one !

I've switched to DropOem=false and it worked !
I was able to install Sierra but now, pretty much nothing is working.

First, my NVIDIA Quadro 1000M is not recognized.
I installed web drivers, nvda_drv=1 and nv_disable=0 but still not working.
http://www.insanelymac.com/forum/to...ver-updates-for-macos-sierra-update-12152016/

Also, my Intel Graphics HD 530 doesn't seem to be working correctly.
OS X sees only 31Mo of VRAM instead of 4096 and my Desktop is cropped (see screenshot attached).
I didn't find useful threads about that in the forum. Do you have an idea ?

My Intel® Dual Band Wireless-AC 8260 802.11 ac/a/b/g/n (2x2) WiFi card is not working either.
But I think from what i've been reading that it can't be done yet (?) :
https://www.tonymacx86.com/threads/intel-wifi-driver-effort.186344

Here is my Clover folder attached.
Thanks

Capture d’écran 2016-12-23 à 17.10.27.png Capture d’écran 2016-12-23 à 17.10.14.png Capture d’écran 2016-12-23 à 16.22.54.png
 

Attachments

  • CLOVER.zip
    1.8 MB · Views: 293
Thank you RehabMan, you're the one !

I've switched to DropOem=false and it worked !
I was able to install Sierra but now, pretty much nothing is working.

First, my NVIDIA Quadro 1000M is not recognized.
I installed web drivers, nvda_drv=1 and nv_disable=0 but still not working.
http://www.insanelymac.com/forum/to...ver-updates-for-macos-sierra-update-12152016/

Also, my Intel Graphics HD 530 doesn't seem to be working correctly.
OS X sees only 31Mo of VRAM instead of 4096 and my Desktop is cropped (see screenshot attached).
I didn't find useful threads about that in the forum. Do you have an idea ?

My Intel® Dual Band Wireless-AC 8260 802.11 ac/a/b/g/n (2x2) WiFi card is not working either.
But I think from what i've been reading that it can't be done yet (?) :
https://www.tonymacx86.com/threads/intel-wifi-driver-effort.186344

Here is my Clover folder attached.
Thanks

View attachment 226582 View attachment 226583 View attachment 226584

Attach output of 'lspci -nn' in Linux Terminal.
 
Thank you RehabMan, you're the one !

I've switched to DropOem=false and it worked !
I was able to install Sierra but now, pretty much nothing is working.

First, my NVIDIA Quadro 1000M is not recognized.
I installed web drivers, nvda_drv=1 and nv_disable=0 but still not working.
http://www.insanelymac.com/forum/to...ver-updates-for-macos-sierra-update-12152016/

Also, my Intel Graphics HD 530 doesn't seem to be working correctly.
OS X sees only 31Mo of VRAM instead of 4096 and my Desktop is cropped (see screenshot attached).
I didn't find useful threads about that in the forum. Do you have an idea ?

My Intel® Dual Band Wireless-AC 8260 802.11 ac/a/b/g/n (2x2) WiFi card is not working either.
But I think from what i've been reading that it can't be done yet (?) :
https://www.tonymacx86.com/threads/intel-wifi-driver-effort.186344

Here is my Clover folder attached.
Thanks

View attachment 226582 View attachment 226583 View attachment 226584

Also, your laptop has a guide...
https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/

Intel WiFi not supported, must be replaced (read guide).
If your Nvidia is dedicated, you might be able to get it to work, but if Optimus, it will not be usable.

--

Note also mistake in your SSDT-NVMe-PCC:
DefinitionBlock ("", "SSDT", 2, "hack", "NVMe-Pcc", 0x00000000)
{
External (_SB_.PCI0.RP13.PXSX, DeviceObj) // (from opcode)

Method (_SB.PCI0.RP09.PXSX._DSM, 4, NotSerialized) // _DSM: Device-Specific Method
...

I guess the External isn't really required... But still, those two should match.
 
Have you had any more success with you Zbook Studio G3? Thinking about buying the same machine, and hopes that it could be used as a hackintosh.
 
I have zbook g3
and with lspci -nn
i get:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:16.3 Serial controller [0700]: Intel Corporation Sunrise Point-H KT Redirection [8086:a13d] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] [8086:a102] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a150] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107GLM [Quadro M2000M] [10de:13b0] (rev a2)
01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
02:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
 
I have zbook g3
and with lspci -nn
i get:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:16.3 Serial controller [0700]: Intel Corporation Sunrise Point-H KT Redirection [8086:a13d] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] [8086:a102] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a150] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107GLM [Quadro M2000M] [10de:13b0] (rev a2)
01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
02:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)

No NVMe there. Off-topic.
Your laptop has a guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/
 
Status
Not open for further replies.
Back
Top