Contribute
Register

HP ZBOOK G5 17

Are you still getting "waiting for root device"...?
Are you using a USB2 flash drive as already suggested?

I don't have usb2 port and I used usb3 flash drive. Seems I have to add something to manage usb3.

Complete nonsense. Your hardware has no EHCI controllers.
I've remove ECHI I though that was for usb. Sorry.
 
I even try this :
Install USB Inject All kext
Then, the following patch in config file with clover configurator under the kext patches tab:

New USB port limit patch


Comment: USB Port limit patch 10.14 (credits FredWst)
Name: com.apple.driver.usb.AppleUSBXHCI
Find: 83 FB 0F 0F 83 03 05 00 00
Replace: 83 FB 0F 90 90 90 90 90 90
 
Yes with USB2 key plug on usb3 port that let me format disk with aps format. Then start installed on the disk but stuck always at 6 min remaining. try 4 times.
IMG_20181127_024315.jpg
 
I will either be buying the same model or the very similar x360 version within the next few weeks and will be glad to help out with this process as well.
 
I’ve found out is my samsung nvme model which is not compatible with macos, after replace with samsung 970 pro that work fine but my laptop have intel wifi soldered and a m 2 key B slot 3042 so can’t find broadcom card that fit.

If someone know broadcom bigger enough to fit wwan slot (m 2 key B 3042) ?
 

Attachments

  • A7BA3AEF-D31B-437A-90A0-A822CE61A567.jpeg
    A7BA3AEF-D31B-437A-90A0-A822CE61A567.jpeg
    3.3 MB · Views: 203
Hi levanlong,

I am using same model zbook17 g5 like you, would you please share you clover folder ?
thanks a lot.
 
hi,

I change used m2 b+m to mpcie to use apple wifi BCM...602S and not able to make bluetooh work and even not set display yet.
I've even change my m2 drive model to have samsung because provided one not compatible with hackintosh.
tonight I will send you my files.
 
Back
Top