Contribute
Register

HP Revolve 810 G2 (sierra-clover) help.

Status
Not open for further replies.
It doesn't seem that your config.plist is per guide...
hi rehmabman,

i did everything as you mentioned for me before what i can do next ,
i try to do all steps from zero again and i getting same result ..
 
Hi Rehabman,
I hope everything with you is fine, this clover folder with Boot verbose, attach photo.
 

Attachments

  • CLOVER.zip
    3.7 MB · Views: 73
Hi Rehabman,
I hope everything with you is fine, this clover folder with Boot verbose, attach photo.

Are you booting the installer or something else?
Your config.plist is not from my guide (looks like SMBIOS section has been modified).
From where did you download macOS?
On what hardware did you create your USB installer?
How long did you wait? Keep in mind booting the installer is not quick.
Make sure you use a USB2 stick, and try all USB ports.
GenericUSBXHCI.kext has no application to your hardware. Remove.
Use an invalid ig-platform-id (0x12345678) if you think you may have a graphics problem.
 
Are you booting the installer or something else?
Your config.plist is not from my guide (looks like SMBIOS section has been modified).
From where did you download macOS?
On what hardware did you create your USB installer?
How long did you wait? Keep in mind booting the installer is not quick.
Make sure you use a USB2 stick, and try all USB ports.
GenericUSBXHCI.kext has no application to your hardware. Remove.
Use an invalid ig-platform-id (0x12345678) if you think you may have a graphics problem.

When changed ig-platform-id to (0x12345678) its boot successfuly then i install mac os but now the graphic is only 3mb and diplay is freezing usually graphic is 1500 mb!
 
When changed ig-platform-id to (0x12345678) its boot successfuly then i install mac os but now the graphic is only 3mb and diplay is freezing usually graphic is 1500 mb!

That is what is expected with an invalid ig-platform-id.
Now you have to work to figure out your graphics issue.
Try injecting EDID.
 
That is what is expected with an invalid ig-platform-id.
Now you have to work to figure out your graphics issue.
Try injecting EDID.


i tried to inject EDID but no success to boot without an invalid ig-platform-id (0x12345678), please see the attaches if there are any mistakes.
IMG_5874.jpg
IMG_5875.jpg
 

Attachments

  • CLOVER.zip
    1.3 MB · Views: 58
you mean pre-boot file , dsdt and ....?
 
you mean pre-boot file , dsdt and ....?

All data requested in FAQ, "Problem Reporting".
There is no need for me to repeat the request here, as it is already written in the FAQ.
 
Status
Not open for further replies.
Back
Top