Contribute
Register

HP ProDesk 600 G2 - SUCCESS

Joined
Aug 1, 2012
Messages
5
Motherboard
HP ProDesk 600 G2 Mini
CPU
i7 6700
Graphics
HD530
I just wanted to pass on some info. I was able to get Ventura 13.2 booted. I'll leave it at that. I can start a new topic if anyone is interested in the EFI or helping on some trouble shooting still required for acceleration.

If this post goes against the rules please delete and I will use that as my indication to start a new post.

EDIT: removed "I know this post is under High Sierra BUT" since this post is now in Ventura Desktop Support.
 
Last edited:
I know this post is under High Sierra BUT I just wanted to pass on some info. I was able to get Ventura 13.2 booted. I'll leave it at that. I can start a new topic if anyone is interested in the EFI or helping on some trouble shooting still required for video.

If this post goes against the rules please delete and I will use that as my indication to start a new post.
I have given you your own thread

well done on your installation :)
 
Hi Rico, What GPU did you use?
 
Hi Rico, could you please share the efi
Sorry been away for a bit. I could only upload the config. Just open it in OpenCore Configurator and you'll see everything needed. Still having issues with acceleration. OP Legacy Patcher patches it but doesn't work. Do a cleanNVRAM EVERY-TIME after applying ANY changes. This caused me unnecessary headache by not doing it.
 

Attachments

  • config.plist
    32.7 KB · Views: 83
Last edited:
Internal HD530 but ID 00001659.
OCLP is really designed for real macs

XhciPortLimit needs to be disabled

remove amfi_get_out_of_my_way=1

as you are using a skylake system, you need to spoof a kabylake system:

ID should be 00001259

also for some strange reason, you have framebuffer-patch-enable set to 0AAAAA which should be 01000000

and you have also done the same or similar to all your con* as well....?
 
Last edited:
OCLP is really designed for real macs

XhciPortLimit needs to be disabled

remove amfi_get_out_of_my_way=1

as you are using a skylake system, you need to spoof a kabylake system:

ID should be 00001259

also for some strange reason, you have framebuffer-patch-enable set to 0AAAAA which should be 01000000

and you have also done the same or similar to all your con* as well....?
I appreciate the feedback. Made the changes as indicated and still booted good but no acceleration as well. I'll keep trying. Reason I had them as 0AAAAA is due to copy paste that I found. Since it booted I didnt make any changes as to not break the boot. Thanks.
 

Attachments

  • config.plist
    32.7 KB · Views: 41
I appreciate the feedback. Made the changes as indicated and still booted good but no acceleration as well. I'll keep trying. Reason I had them as 0AAAAA is due to copy paste that I found. Since it booted I didnt make any changes as to not break the boot. Thanks.
you still have your other properties that have incorrect values
 
Hi, Can anyone share a working EFDI for Monterey or Ventura? Thank you
 
Yes please somone update us with a working EFI
 
Back
Top