HP Probook 6650b M450 El Capitan clover no boot

[fransyozef]

Hi

I'm tryin to get the OS X installer to run, but I get stuck just after selecting the boot volume
I'm using Clover EFI on an USB2 stick with El Capitan.

My system :

HP ProBook 6550b
Intel Core i5 M450

So I didn't know wich plist to choose , so I choose config_HD4000_1600x900_6series.plist , based on the screen resolution in Windows.

I've tried this guide : https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/


This is the screen I'm stuck with (verbose mode):

 

[RehabMan]

Hi

I'm tryin to get the OS X installer to run, but I get stuck just after selecting the boot volume
I'm using Clover EFI on an USB2 stick with El Capitan.

My system :

HP ProBook 6550b
Intel Core i5 M450

So I didn't know wich plist to choose , so I choose config_HD4000_1600x900_6series.plist , based on the screen resolution in Windows.

I've tried this guide : https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/


This is the screen I'm stuck with (verbose mode):

View attachment 325938

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[fransyozef]

Hmm ok .. So not sure wich files where missing, so now I've just zipped my complete clover folder.

 

[RehabMan]

Hmm ok .. So not sure wich files where missing, so now I've just zipped my complete clover folder.

View attachment 325946

Do not use config.plist for mixed configuration.
You should probably use config_HD3000_1366x768.plist.
Keep in mind you will likely need to set FakeID 0x12345678 (as per guide), due to Arrandale graphics (which requires significant patching to make it work).

Make sure you use a USB2 stick, try all USB ports.
As per guide, AptioMemoryFix.efi may work in scenarios where OsxAptioFixDrv-64.efi does not.

 

[fransyozef]

Do not use config.plist for mixed configuration.
You should probably use config_HD3000_1366x768.plist.
Keep in mind you will likely need to set FakeID 0x12345678 (as per guide), due to Arrandale graphics (which requires significant patching to make it work).

Make sure you use a USB2 stick, try all USB ports.
As per guide, AptioMemoryFix.efi may work in scenarios where OsxAptioFixDrv-64.efi does not.

Thanks, I will try it.

 

[fransyozef]

Hmm .. I tried AptioMemoryFix.efi but also got an error

 

[RehabMan]

Hmm .. I tried AptioMemoryFix.efi but also got an error

View attachment 326030

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[fransyozef]

 

[RehabMan]

View attachment 326229

As per guide you can try OsxAptioFixDrv-64.efi, or the other OsxAptioFix*.efi.
Or you could try legacy boot.