Contribute
Register

HP ProBook 6460b SD Card Not Working !!!!

Status
Not open for further replies.
My sdcard reader doesn't work. I followed the guide, I have all working. I posted in a different thread because sound wasn't working but I did get that working. Didn't care about sdcard but now I kind of need it working. here is my ioreg and everything else i posted in the other thread.

Check:
- card reader enabled in BIOS
- firewire disabled
- compatible SD card inserted (use an old/small SD card)
 
Check:
- card reader enabled in BIOS
- firewire disabled
- compatible SD card inserted (use an old/small SD card)
Flash media is enabled in BIOS. When I plug in my SD card PNY sdhc10 32GB, I get kernel panic. Maybe card is too big? or just not compatible?
 
Flash media is enabled in BIOS. When I plug in my SD card PNY sdhc10 32GB, I get kernel panic. Maybe card is too big? or just not compatible?

Show photo of the panic.
 
taken from console. Do I need HSSDBlockStorage and JMB38X?
Wed Jun 22 18:03:56 2016

*** Panic Report ***
panic(cpu 2 caller 0xffffff80003d6a9a): Kernel trap at 0xffffff7f82439676, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff7f8240f060, CR3: 0x0000000003d3e000, CR4: 0x00000000000626e0
RAX: 0xffffff7f8240f060, RBX: 0x0000000000000001, RCX: 0x0000000001000000, RDX: 0xffffff8011379780
RSP: 0xffffff81095bbe60, RBP: 0xffffff81095bbe80, RSI: 0xffffff8011ff7a00, RDI: 0xffffff8011e60fc0
R8: 0xffffff80121c2100, R9: 0x0000000000000001, R10: 0x0000000000000000, R11: 0x0000000000000008
R12: 0xffffff8011e60fc0, R13: 0xffffff8011ff7a00, R14: 0xffffff8011ff7a00, R15: 0xffffff8011e60fc0
RFL: 0x0000000000010202, RIP: 0xffffff7f82439676, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff7f8240f060, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0

Backtrace (CPU 2), Frame : Return Address
0xffffff81095bbaf0 : 0xffffff80002e5357
0xffffff81095bbb70 : 0xffffff80003d6a9a
0xffffff81095bbd50 : 0xffffff80003f4093
0xffffff81095bbd70 : 0xffffff7f82439676
0xffffff81095bbe80 : 0xffffff800089405d
0xffffff81095bbec0 : 0xffffff8000893b66
0xffffff81095bbf30 : 0xffffff800088e81a
0xffffff81095bbf70 : 0xffffff80008947fc
0xffffff81095bbfb0 : 0xffffff80003d14b7
Kernel Extensions in backtrace:
com.jmicron.driver.HSSDBlockStorage(1.5)[4C3C2E1B-AB47-4918-FDAC-F6F596188453]@0xffffff7f82438000->0xffffff7f82446fff
dependency: com.jmicron.driver.JMB38X(1.5.0)[08D3EAF8-7DCD-717C-8972-68EA3B16183E]@0xffffff7f81292000
dependency: com.apple.iokit.IOUSBFamily(900.4.1)[CB8A6BC0-D37B-36C6-BDAF-F61B7EAA85E5]@0xffffff7f80d80000
dependency: com.apple.iokit.IOStorageFamily(2.1)[956BA336-5C0A-37E9-B395-538D1BD95AC0]@0xffffff7f80be8000

BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 dart=0 slide=0

Mac OS version:
15A284

Kernel version:
Darwin Kernel Version 15.0.0: Wed Aug 26 16:57:32 PDT 2015; root:xnu-3247.1.106~1/RELEASE_X86_64
Kernel UUID: 37BC582F-8BF4-3F65-AFBB-ECF792060C68
__HIB text base: 0xffffff8000100000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)

System uptime in nanoseconds: 7030292712
last loaded kext at 6923930629: com.jmicron.driver.HSSDBlockStorage 1.5.0 (addr 0xffffff7f82438000, size 61440)
loaded kexts:
com.jmicron.driver.HSSDBlockStorage 1.5.0
org.rehabman.voodoo.driver.PS2Mouse 1.8.22
org.rehabman.voodoo.driver.PS2Trackpad 1.8.22
org.rehabman.voodoo.driver.PS2Keyboard 1.8.22
com.jmicron.driver.JMB38X 1.5.0
org.rehabman.driver.FakePCIID 1.3.1
com.insanelymac.IntelMausiEthernet 2.1.0d5
org.rehabman.voodoo.driver.PS2Controller 1.8.22
com.rehabman.driver.ACPIPoller 0.8.1
org.rehabman.driver.AppleSmartBatteryManager 1.70.0
org.netkas.driver.FakeSMC 1707
com.rehabman.driver.USBInjectAll 0.5.11
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 37
com.apple.iokit.IOAHCIBlockStorage 2.8.0
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AirPort.Brcm4360 1000.13.1a3
com.apple.driver.AppleAHCIPort 3.1.5
com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 163
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.driver.AppleXsanScheme 3
com.apple.iokit.IO80211Family 1100.23
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.driver.corecapture 1.0.4
com.apple.iokit.IOAHCIFamily 2.8.0
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.usb.AppleUSBEHCI 1.0.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 414
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.Libm 1
com.apple.kec.corecrypto 1.0
 
taken from console. Do I need HSSDBlockStorage and JMB38X?
Wed Jun 22 18:03:56 2016

Yes.

*** Panic Report ***

It is crashing in the JMicron drivers for the SD card. Must be something about that card that they don't like. The drivers are old and do not work properly with all cards.
 
Yes.



It is crashing in the JMicron drivers for the SD card. Must be something about that card that they don't like. The drivers are old and do not work properly with all cards.
OK, I'll try getting a different card and see if that helps. Thanks for taking the time to help out.
 
great info.
have to place sd card kexts in S/L/E. if inject from clover, not work.
 
Status
Not open for further replies.
Back
Top