HP Pavilion 15 - Mac Os Sierra

[BobbyGGWP]

Hi I won an HP Pavilion 15-ab233na 15.6" Laptop Intel Iris, Core i3 5157u and I've been trying to install Mac Os Sierra on it but when I get to the Clover Boot menu and choose to Install Mac OS from USB it starts then stops at the Apple logo with an empty bar at the bottom and stays like that any help please, thanks.

 

[RehabMan]

Hi I won an HP Pavilion 15-ab233na 15.6" Laptop Intel Iris, Core i3 5157u and I've been trying to install Mac Os Sierra on it but when I get to the Clover Boot menu and choose to Install Mac OS from USB it starts then stops at the Apple logo with an empty bar at the bottom and stays like that any help please, thanks.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[BobbyGGWP]

Thanks for the reply but I don't get it one bit to be honest...

 

[RehabMan]

Thanks for the reply but I don't get it one bit to be honest...

What do you mean by "it"?

Did you read the FAQ yet?
Did you read the guide that is linked from the FAQ?
If so, why is your profile not filled out as requested in both the FAQ/guide?

 

[fivos1996]

Make sure you have the following settings in the BIOS:
SATA configured as AHCI
DVMT-pre allocated = 64 or 96MB
VT-d = Disabled (or use dart=0)
And boot with -v (Verbose) so you can see where it hangs and post a picture.
Also, read RehabMan's beginner's guides and fill your profile ID with your full specs.