HP Envy 15 Yosemite

[1mperial]

Hi everyone).
I have hp envy touchsmart 15,6 (1366x768)
Intel® Core™ i7-4702MQ with Intel HD Graphics 4600 (2.2 GHz, 6 MB cache, 4 cores)
12 GB 1600 MHz DDR3L SDRAM
1.0 TB 5400 rpm SATA
NVIDIA GeForce 750M (2GB)
Wireless
802.11b/g/n (1x1) and Bluetooth® 4.0 combo
HP Imagepad with multi-touch gesture support
HP TrueVision HD Webcam (front-facing) with integrated dual array digital microphone
Beats Audio™ with 4 speakers and two subwoofers

I'm working now on VMWare but it's realy slow.. So I decided install hackintosh (it's my first hack).
I'v read a lot of tutorials, seen many videos. But in all of them explained how to install 10.9 mavericks.
Since Apple released xCode 6.3 which installs only on 10.10 Yosemite, i need 10.10 osx.

I stucked on booting the installer...

What I did:
1. Download os x from AppStore
2. Format usb drive(16gb)
3. Created bootable usb with unibeast
4. Moved multibeast to usb.
5. Patched kernel with terminal (patch for os x 10.10.x)
http://www.insanelymac.com/forum/to...he-kernel-for-haswell-cpus-xcpm-early-reboot/
6. Setup my bios.

When i boot from usb, I see bootloader. Choose Yosemite, type flags -v -x.
(i've tryed -x -v -f IntelAzulFB=11 IGPEnabled=No and different combinations of them).
In result, i'm waiting a few minutes, see a lot of logs in console and system reboots.

I know that hasswell is not the best for hackintosh, but it's possible. If someone knows, please help.

Thanks.

 

[RehabMan]

Hi everyone).
I have hp envy touchsmart 15,6 (1366x768)
Intel® Core™ i7-4702MQ with Intel HD Graphics 4600 (2.2 GHz, 6 MB cache, 4 cores)
12 GB 1600 MHz DDR3L SDRAM
1.0 TB 5400 rpm SATA
NVIDIA GeForce 750M (2GB)
Wireless
802.11b/g/n (1x1) and Bluetooth® 4.0 combo
HP Imagepad with multi-touch gesture support
HP TrueVision HD Webcam (front-facing) with integrated dual array digital microphone
Beats Audio™ with 4 speakers and two subwoofers

I'm working now on VMWare but it's realy slow.. So I decided install hackintosh (it's my first hack).
I'v read a lot of tutorials, seen many videos. But in all of them explained how to install 10.9 mavericks.
Since Apple released xCode 6.3 which installs only on 10.10 Yosemite, i need 10.10 osx.

I stucked on booting the installer...

What I did:
1. Download os x from AppStore
2. Format usb drive(16gb)
3. Created bootable usb with unibeast
4. Moved multibeast to usb.
5. Patched kernel with terminal (patch for os x 10.10.x)
http://www.insanelymac.com/forum/to...he-kernel-for-haswell-cpus-xcpm-early-reboot/
6. Setup my bios.

When i boot from usb, I see bootloader. Choose Yosemite, type flags -v -x.
(i've tryed -x -v -f IntelAzulFB=11 IGPEnabled=No and different combinations of them).
In result, i'm waiting a few minutes, see a lot of logs in console and system reboots.

I know that hasswell is not the best for hackintosh, but it's possible. If someone knows, please help.

Thanks.

Read compatibility overview: http://www.tonymacx86.com/laptop-compatibility/106791-laptop-compatibility.html

Use Clover: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

Also, you will find many of the stickies here useful: http://www.tonymacx86.com/yosemite-laptop-support/

 

[1mperial]

Read compatibility overview: http://www.tonymacx86.com/laptop-compatibility/106791-laptop-compatibility.html

Use Clover: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

Also, you will find many of the stickies here useful: http://www.tonymacx86.com/yosemite-laptop-support/

Thanks a lot!
I did everything said there. Successfully installed os x 10.10.3 on hdd.
Then after system boot up, i've installed clover same way that i did for installer (with another install target).
But i got a problem with boot from hdd. Clover opens, i choose "Boot os x from Yosemite" and see black screen only.
When i'm booting from usb ("Boot os x from Yosemite") everything is ok. What can be a problem?

P.S. After installed clower to hdd I skip "copy HFSPlus.efi". Should I copy it on hdd?

 

[RehabMan]

Thanks a lot!
I did everything said there. Successfully installed os x 10.10.3 on hdd.
Then after system boot up, i've installed clover same way that i did for installer (with another install target).
But i got a problem with boot from hdd. Clover opens, i choose "Boot os x from Yosemite" and see black screen only.
When i'm booting from usb ("Boot os x from Yosemite") everything is ok. What can be a problem?

P.S. After installed clower to hdd I skip "copy HFSPlus.efi". Should I copy it on hdd?

The requirements for Clover on HDD are the same as Clover on USB.