hi
@PaintArm2,
FixRTC has not worked for me. However I might have not checked it correctly. I will try again. Prior this hackintosh I have setup a skylake laptop as a hackintosh and many SSDTs are influenced from that. I am trying to learn.
* SSDT-RMCF is a general purpose DSL by Rehabman that is setting up some parameters used in other DSLs.
* In order to 'simulate' as close as possible a real skylake mac I have used: SSDT-SMBUS, SSDT-EC, SSDT-GPRW, SSDT-DMAC, SSDT-HPET, SSDT-MEM2, SSDT-PMCR, SSDT-LPC
* SSDT-PTSWAK is for fixing sleep/wakup (based on Rehabman's one)
* SSDT-XOSI the OS patch required
* SSDT-UIAC and SSDT-USBX are USB related. (I have used the 'older' guide from Rehabman for this) not the codeless kext that hackingtool produces.
I have included a 'compiled' DSDT.aml because there is an error on the DSDT itself which I fixed.
All the sources of the files are included in the github repo along with comments.
Check also this on many details:
https://github.com/sakoula/HP-EliteDesk-800-G2-6700/blob/master/DETAILS.md
In general for me it seems much more stable now. For example prior using this configuration on shutdown the computer did not boot back again and I had to take off the power cable in order to be able to boot.
Do you run a similar config.plist ?