Contribute
Register

HP EliteBook Folio 9470m

Status
Not open for further replies.
Yes. I just confirmed working on BCM94352HMB
interesting....

few backs back I tried with that new kext and disabled the injector kext but no handoff

also hackintool mentioned the firmware wasn't loaded but I assumed that was due to not having an injector kext

do you still have the brcmFirmwareData and patchram3 kexts loaded?
 
interesting....

few backs back I tried with that new kext and disabled the injector kext but no handoff

also hackintool mentioned the firmware wasn't loaded but I assumed that was due to not having an injector kext

do you still have the brcmFirmwareData and patchram3 kexts loaded?
I think they are loaded as shown by Kext Wizard.
Monterey beta 4 is more stable than beta 2.
Screen Shot 2021-08-04 at 10.53.43 PM.png
 
yahgoo, thank you for share your EFI folders! I just successfully installed BigSur on same HP 9470m. But then I have randomly boot problems with random last message. But this errors appeares only when I'm trying to boot into BigSur. Recovery boots every time without any problem! Next I found that when I choose Enable (Disable) Sip in boot menu of OpenCore BigSur boot without issues. But next time boot option for Sip resets to default, so I can't boot again. I'm newbie in OpenCore so, could somebody help with that problem? Thank you!
 

Attachments

  • photo_2021-09-01_18-52-36.jpg
    photo_2021-09-01_18-52-36.jpg
    149.3 KB · Views: 58
  • photo_2021-09-01_18-52-26.jpg
    photo_2021-09-01_18-52-26.jpg
    173.1 KB · Views: 50
  • photo_2021-09-01_18-52-09.jpg
    photo_2021-09-01_18-52-09.jpg
    191 KB · Views: 51
  • photo_2021-09-01_18-51-59.jpg
    photo_2021-09-01_18-51-59.jpg
    185.1 KB · Views: 53
I just successfully installed BigSur on same HP 9470m.
Why are you using a Desktop SMBIOS with a Laptop ?

Screenshot 2021-09-01 at 20.02.35.png



Not usually a good idea.
 
Just because it was in config.plist and I think that should work, because this config confirmed works by yahgoo... In Dontarnia's guide in IvyBridge Laptop Section described using iMac13,2 SMBIOS. Do you think I should use MacBookPro10,2 or MacBookPro11,1 SMBIOS? Or maybe MacBookAir5,2 (MacBookAir6,2)?
 
Just because it was in config.plist and I think that should work, because this config confirmed works by yahgoo... In Dontarnia's guide in IvyBridge Laptop Section described using iMac13,2 SMBIOS. Do you think I should use MacBookPro10,2 or MacBookPro11,1 SMBIOS? Or maybe MacBookAir5,2 (MacBookAir6,2)?
use a laptop smbios for a laptop...
 
Do you have kexts in /Library/Extensions or other places? You've got a ton of duplicate kexts which are being rejected.

I think you might've looked at the desktop guide, not the laptop one. They're in separate categories on the left on the Dortania page. It definitely doesn't recommend iMac13,2. MacBookPro10,x is probably fine.
 
Thank you for help! I will try!
About kext… Before I was use Mojave with clover, but all kext was only in Other kext folder! I didn’t install them to Library/Extensions.
 
MacBookPro10,2 is not working for me… Incompatible model, but MacBookPro11,1 is working.
 
Thank you for help! I will try!
About kext… Before I was use Mojave with clover, but all kext was only in Other kext folder! I didn’t install them to Library/Extensions.
All the logs you showed had errors about duplicate kexts, so they have to be somewhere. Check around a bit, check your EFI, etc. Some of the kexts that are trying to be loaded look really old as well, especially Lilu.
 
Status
Not open for further replies.
Back
Top