Contribute
Register

how to select correct config.plist

Status
Not open for further replies.
Joined
Jun 15, 2015
Messages
4
Motherboard
HP ProBook 450 G2
CPU
Intel® Core™ i5-4210U
Graphics
Intel HD Graphics 4400
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi,

i am installing MAC using below method,

http://www.tonymacx86.com/hp-proboo...-install-yosemite-hp-laptops-clover-uefi.html

but i have some confusion about selecting correct "config.plist file"

My HP Probook model "450 G2"
Specification:

[h=4]HP ProBook 450 G2 Notebook PC (K1V55PA)[/h][FONT=hp_simplifiedregular](HP Part Code: K1V55PA)[/FONT][FONT=hp_simplifiedregular][/FONT][h=5][/h][FONT=hp_simplifiedregular]Intel® Core™ i5-4210U Processor
DOS
4GB RAM / 500GB HDD
Metallic Gray / 15.6"
[/FONT]

[FONT=hp_simplifiedregular]HP original notebook Carrycase included


So please let me know which "config.plist" should i chose from "Config" folder to install properly.

Thanks

[/FONT]
 
unzip config.zip open config folder select the folder that matches your laptop hardware & copy the config.plist using the instructions at the bottom of step 1
 
Yes, i have already unzipped but there are many files and my laptop specs is

Processor:
Intel® Core™ i5-4210U with Intel HD Graphics 4400 (1.7 GHz, up to 2.7 GHz with Intel Turbo Boost Technology, 3 MB cache, 2 cores)

Memory:
4 GB 1600 MHz DDR3L SDRAM (1 x 4 GB)

Hard drive description:
500 GB 7200 rpm SATA

Display:
15.6" diagonal HD anti-glare LED-backlit (1366 x 768)

which file should i chose, there are 4-5 files with (1366 x 768)?
 
Yes, i have already unzipped but there are many files and my laptop specs is

Processor:
Intel® Core™ i5-4210U with Intel HD Graphics 4400 (1.7 GHz, up to 2.7 GHz with Intel Turbo Boost Technology, 3 MB cache, 2 cores)

Memory:
4 GB 1600 MHz DDR3L SDRAM (1 x 4 GB)

Hard drive description:
500 GB 7200 rpm SATA

Display:
15.6" diagonal HD anti-glare LED-backlit (1366 x 768)

which file should i chose, there are 4-5 files with (1366 x 768)?
There is only one HD4400 file. You should at least read what you posted.
 
I tried with config file "HD4400-4600" and "HD4000 1366x768" but it's not navigating to installer screen, but when i tried with "HD3000 1366X768 on 7-series chipset" it's worked for me and i am able to successfully install Yosemite on my laptop, but wifi is not working on my laptop. Please can you suggest me, what i will have to do for fixing wifi issue?
 
I tried with config file "HD4400-4600" and "HD4000 1366x768" but it's not navigating to installer screen, but when i tried with "HD3000 1366X768 on 7-series chipset" it's worked for me and i am able to successfully install Yosemite on my laptop, but wifi is not working on my laptop. Please can you suggest me, what i will have to do for fixing wifi issue?

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

--

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
 
I tried with config file "HD4400-4600" and "HD4000 1366x768" but it's not navigating to installer screen, but when i tried with "HD3000 1366X768 on 7-series chipset" it's worked for me and i am able to successfully install Yosemite on my laptop, but wifi is not working on my laptop. Please can you suggest me, what i will have to do for fixing wifi issue?

Read the guide again, you have to replace wifi card.
 
Status
Not open for further replies.
Back
Top