Hi KGP
Thanks again for the amazing guide!
I have read it few times now and I did my best to follow your steps to the letter.
I'm very happy with my system now and there is no issues at all.. Everything works nicely and benchmarks are even better than windows 10
Can you pls confirm that my power management is working?
Core i7 5820k
MSI X99S Mpower
GTX 960
I attached my Bios settings below, I marked what I changed with blue, everything else is bios defaults
And my config.plist patches,
Efi folder here,
https://drive.google.com/file/d/1PymaypDKGzQBgdWlavkTVbDVZmsJLzEm/view?usp=sharing
AppleIntelInfo.kext
Code:
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x2f4a66847e4d (1575 MHz)
MWAIT C-States...........................: 8480
Processor Brandstring....................: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz
Processor Signature..................... : 0x306F2
------------------------------------------
- Family............................... : 6
- Stepping............................. : 2
- Model................................ : 0x3F (63)
Model Specific Registers (MSRs)
------------------------------------------
MSR_IA32_PLATFORM_ID.............(0x17) : 0x8000000000000
------------------------------------------
- Processor Flags...................... : 2
MSR_CORE_THREAD_COUNT............(0x35) : 0x6000C
------------------------------------------
- Core Count........................... : 6
- Thread Count......................... : 12
MSR_PLATFORM_INFO................(0xCE) : 0x20080C3BF3812100
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x402
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C6 is the max C-State to include)
IA32_MPERF.......................(0xE7) : 0x50C099B057
IA32_APERF.......................(0xE8) : 0x62E23BD9C9
MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------
MSR_IA32_PERF_STATUS.............(0x198) : 0x29A100002C00
------------------------------------------
- Current Performance State Value...... : 0x2C00 (4400 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0xC00
------------------------------------------
- Target performance State Value....... : 0xC00 (1200 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x88430000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 67
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x840089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 0 (disabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x660A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 102
- TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 0 (disabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 0 (disabled)
- SpeedShift Technology Setup for HWP.. : No (not setup for HWP)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222C2C2C2C2C2C
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C03.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C04.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C05.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C06.......... : 2C (4400 MHz)
MSR_POWER_CTL....................(0x1FC) : 0x2900005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF8001DFFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 14 (40960 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x1A1454E9
------------------------------------------
- Total Energy Consumed................ : 26705 Joules (Watt = Joules / seconds)
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1BB25126D80
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1BB25126D80
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x168804C6CC9
IA32_TSC_DEADLINE................(0x6E0) : 0x2F4A69367186
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 35 44 ]
CPU C6-Cores [ 0 2 4 6 8 11 ]
CPU P-States [ 12 35 36 (44) ]
CPU C6-Cores [ 0 1 2 4 5 6 8 11 ]
CPU P-States [ (12) 34 35 36 44 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 10 11 ]
CPU P-States [ (12) 34 35 36 40 44 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 ]
CPU P-States [ (12) 29 34 35 36 40 44 ]
CPU P-States [ (12) 29 33 34 35 36 40 44 ]
CPU P-States [ 12 29 32 33 34 35 36 40 (44) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ (12) 29 31 32 33 34 35 36 40 44 ]
CPU P-States [ (12) 26 29 31 32 33 34 35 36 40 44 ]
CPU P-States [ (12) 24 26 29 31 32 33 34 35 36 40 44 ]
All my USB3 and USB2 are working perfectly, but I will try your USB configuration guide next.
Thanks!