How to enable 'Kaby Lake' Intel 6xx Graphics (10.12.6+)

[gerosoma]

In latest 10.12.6 beta, cannot boot without using SKL spoof (SKL spoof still works, IMEI driver still loads). Using native KBL (device-id 0x5912, ig-platform-id 0x59120000) results in hang when it should switch to using the gfx drivers. It is as if Lilu.kext + IntelGraphicsFixup.kext not working (gIOConsoleUsers hang). I will check that I have latest Lilu.kext + IntelGraphicsFixup.kext on my 10.12.6 install, as I do on my 10.13 beta install.

10.12.6 beta using Nvidia 1050 Ti (IGPU disabled, build identifier in Info.plist for NVDAStartupWeb.kext modified to match 10.12.6 beta), results in AppleIntelMEIDriver not loading. Not surprising given it is the IGPU drivers that load it.

In latest 10.13 beta, Intel HD630 still working... AppleIntelMEIDriver loads fine against IMEI 0xba2a.

In 10.12.5... SKL spoofing, AppleIntelMEIDriver loads fine against IMEI 0xba2a, no spoofing for IMEI required.

Hi'.
I've build a Sierra 10.12.6 built over a CoffeLake system (GB Z370XP+core i7 8700) with the above mentioned NVidia GTX1050Ti and got stuck with the Graphic Card. The system does not "sees" the 1050Ti... https://www.tonymacx86.com/members/gerosoma.181910/ How can make the 1050Ti be visible for the system? Help please. Thanks.

 

[theruck]

Hello, there
I am desperate so please could anyone point me to a direction?

I have installed High Sierra 10.13.4 on a B250 mainboard with i5 7400
I am using Lilu.kext 1.2.3 and IntelGraphicsFixup 1.2.7
I always get artifacts on the Intel HD 630 even with wing ig platform ID (detects 7 MB) or 0x59120000 (detects 1536 MB)
tried iMac 18,2 and also 18,3 SMBIOS both acting the same
using only these kexts in Clover



attached are clover and ioreg files

 

[theruck]

as usually, after posting the question I found this thread which solves my trouble by selecting SMBIOS of iMac 18,1

anyway I am still having a slight mouse lock-ups after logon which is absolutely related to the HD 630 graphics

 

[fkpwolf]

I have asrock B360M-HDV + i5 8400(uhd630). When booting at 70%, screen go to sleep mode. The screen connect to HDMI port since the board didn't have DP port. I have to disable Intel inject to export the ioreg file.

As @RehabMan said: "One thing nice about 0x59120000 for desktop use is that the LVDS connector present in 0x19120000 was left out, such that the 0306 connector is active, therefore no need for the "4 displays" patch (or connector re-arrange) that was needed with Skylake 0x19120000." So no need framebuffer patch?

 

[RehabMan]

I have asrock B360M-HDV + i5 8400(uhd630). When booting at 70%, screen go to sleep mode. The screen connect to HDMI port since the board didn't have DP port. I have to disable Intel inject to export the ioreg file.

As @RehabMan said: "One thing nice about 0x59120000 for desktop use is that the LVDS connector present in 0x19120000 was left out, such that the 0306 connector is active, therefore no need for the "4 displays" patch (or connector re-arrange) that was needed with Skylake 0x19120000." So no need framebuffer patch?

Your ioreg shows ig-platform-id 0x59160000, not 0x59120000.
Also, your setting in config.plist for FakeID/IntelGFX is wrong. 59128086 (wrong) is not the same as 0x59128086 (correct).

 

[fkpwolf]

Your ioreg shows ig-platform-id 0x59160000, not 0x59120000.
Also, your setting in config.plist for FakeID/IntelGFX is wrong. 59128086 (wrong) is not the same as 0x59128086 (correct).

I changed to 0x59128086 and got same issue. For ig-platform-id 0x59160000 in iorge, it maybe because I disabled Inject Intel otherwise I can't enter system to dump ioreg.

I attached a screenshot just before display goes to sleep/black.

 

[RehabMan]

I changed to 0x59128086 and got same issue. For ig-platform-id 0x59160000 in iorge, it maybe because I disabled Inject Intel otherwise I can't enter system to dump ioreg.

I attached a screenshot just before display goes to sleep/black.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Note: You seem to have a poor choice for SMBIOS. You should try iMac17,1 or iMac14,1.

 

[WaleedAshrafUsmani]

I have intel620 hd but I get acceleration just 4mb can't find right platform id or intel gfx for that card any one guide me

 

[RehabMan]

I have intel620 hd but I get acceleration just 4mb can't find right platform id or intel gfx for that card any one guide me

Read post #1.

 

[WaleedAshrafUsmani]

I

Read post #1.

read that post and Apply possible solution spending many days but cant get acceleration more than 4mb kindly help me.I am Also Attaching my Efi Folder Kindly Check That.