kgp
Retired
- Joined
- May 30, 2014
- Messages
- 6,743
- Motherboard
- ASUS WS X299 Sage 10G
- CPU
- i9-7980XE
- Graphics
- Vega 64
- Mac
- Mobile Phone
Well, I had my computer crash on boot where it would stay black, and not boot.. I have a USB3 Hub that when externally powered, it still supplies power to the computer. I have a feeling that my CMOS got corrupted... I cleared the CMOS, so I had to re-do all the settings... So since I had to do that anyway, I downloaded 1603. I was still on the 1401. Installed it, and my USB is all working fine
So all I have to do is save my settings to my USB, modify the BIOS, and Flash it with the button in back, and restore it.. It should work.
The strange thing is that under 1603, I suddenly need to enable Above 4G decoding for my Sapphire Nitro+ Vega 64, otherwise my system would not even boot to the BIOS and peep 4 times with the error "cannot load video firmware" on the Qled display of my ASUS Prime X299 Deluxe ".