Contribute
Register

How to build your own iMac Pro [Successful Build/Extended Guide]

Status
Not open for further replies.
many thkx @Loloflatsix , indeed it was very simple :oops: and I completed section E.9.1
but again facing some difficulties with next step, section E.9.2
  • Do I need to download SSDT-X299-iMacPro.aml
  • and to copy it into CLOVER/ACPI/patched where I already found a ssdt.aml file ?
  • Where should I write the definition block entry and PCI Device implementation: in the SSDT-X299-iMacPro.aml?
  • how to open a .aml and edit it?

beside I have another question related to my own config... Please tell me if I should rather open a new topic:
I have the Sapphire Nitro+ Vega 64 in slot 1 of my Asus x299 Deluxe
it is sooo big that it hides slot 2 & 3
slot 4 is too close so I did not want to use it in order to leave some air to the GPU, therefore I choose not to have thunderbolt, at least for now.
so I had only slot 6 available to insert my RAID controller
Anyone knows how I could get it work?

When your install seems to be working :

You must put
SSDT-X299-iMacPro.aml in EFI/Clover/ACPI/Patched
Also SSDT XOSI

After you must prepare your system for first boot :
Verify if you had all required kexts in EFI/Clover/Kext/Other
May be :
- FakeSMC
- SmalltreeintelGBE
- AppleALC
- WoodoTSync
- Lilu
- Nvidiagraphicsfixup
- Intelmaus
- KGP iMacproXHCI
And others if needed.
....

You must unckek in ACPI/DSDT all required patch
Now you can boot your system :
See if your PCi are implemented in report system and also in your IOReg.
You have ASUS prime Deluxe witch is fully working with the guide, so for the second boot process you may check all the DSDT patch according to your PCi devices.
Normally it will may done.
( always manage an USB with installer and EFI/Clover witch allow you to boot in case of issue)
 
Last edited:
Hi Ho

when you boot your machine with the USB stick, as soon as it enters the clover screen you can press F1 which will tell you the function keys you have available and their function. If I recall it right, F2 is for savin the the logfile.
After you have saved the logfile, you can go back to your other machine, mount the efi partition and you will finde in clover/misc... the logfile.
There pretty much at the end you can see which kexts have been loaded and if they have given any errors

All teh best
Frank
I'm not 100 percent sure what i'm looking at in this boot file, but i'll post it and hopefully @kgp @izo1 or DSM2 can assist me in showing where im going wrong or what's failing. Apparently Nvidia cards have a harder time installing with x299, maybe thats the reason.

Code:
0:100  0:100  MemLog inited, TSC freq: 2592367600
0:100  0:000  CPU was calibrated with RTC
0:100  0:000
0:100  0:000  Now is 18.4.2018,  18:28:42 (GMT)
0:100  0:000  Starting Clover revision: 4411 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 9.2]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(1,GPT,5EE4A472-E7CE-4B2C-B5DC-99647E5453C5,0x28,0x64000) @311D2B98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:102  0:002  === [ Get Smbios ] ========================================
0:108  0:006  Type 16 Index = 0
0:108  0:000  Type 16 Index = 1
0:108  0:000  Total Memory Slots Count = 8
0:108  0:000  Type 17 Index = 0
0:108  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:108  0:000  SmbiosTable.Type17->Size = 8192MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_A0
0:108  0:000  SmbiosTable.Type17->Vendor =
0:108  0:000  SmbiosTable.Type17->SerialNumber =
0:108  0:000  SmbiosTable.Type17->PartNumber =
0:108  0:000  Type 17 Index = 1
0:108  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:108  0:000  SmbiosTable.Type17->Size = 8192MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_A1
0:108  0:000  SmbiosTable.Type17->Vendor =
0:108  0:000  SmbiosTable.Type17->SerialNumber =
0:108  0:000  SmbiosTable.Type17->PartNumber =
0:108  0:000  Type 17 Index = 2
0:108  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:108  0:000  SmbiosTable.Type17->Size = 8192MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_B0
0:108  0:000  SmbiosTable.Type17->Vendor =
0:108  0:000  SmbiosTable.Type17->SerialNumber =
0:108  0:000  SmbiosTable.Type17->PartNumber =
0:108  0:000  Type 17 Index = 3
0:108  0:000  Ignoring insane frequency value 0MHz
0:108  0:000  SmbiosTable.Type17->Speed = 0MHz
0:108  0:000  SmbiosTable.Type17->Size = 0MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_B1
0:108  0:000  SmbiosTable.Type17->Vendor = <null string>
0:108  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:108  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:108  0:000  Type 17 Index = 4
0:108  0:000  Ignoring insane frequency value 0MHz
0:108  0:000  SmbiosTable.Type17->Speed = 0MHz
0:108  0:000  SmbiosTable.Type17->Size = 0MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_C0
0:108  0:000  SmbiosTable.Type17->Vendor = <null string>
0:108  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:108  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:108  0:000  Type 17 Index = 5
0:108  0:000  Ignoring insane frequency value 0MHz
0:108  0:000  SmbiosTable.Type17->Speed = 0MHz
0:108  0:000  SmbiosTable.Type17->Size = 0MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_C1
0:108  0:000  SmbiosTable.Type17->Vendor = <null string>
0:108  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:108  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:108  0:000  Type 17 Index = 6
0:108  0:000  Ignoring insane frequency value 0MHz
0:108  0:000  SmbiosTable.Type17->Speed = 0MHz
0:108  0:000  SmbiosTable.Type17->Size = 0MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_D0
0:108  0:000  SmbiosTable.Type17->Vendor = <null string>
0:108  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:108  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:108  0:000  Type 17 Index = 7
0:108  0:000  Ignoring insane frequency value 0MHz
0:108  0:000  SmbiosTable.Type17->Speed = 0MHz
0:108  0:000  SmbiosTable.Type17->Size = 0MB
0:108  0:000  SmbiosTable.Type17->Bank/Device = NODE 1 CPU1_DIMM_D1
0:108  0:000  SmbiosTable.Type17->Vendor = <null string>
0:108  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:108  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:108  0:000  Boot status=0
0:108  0:000  Running on: 'X299 DESIGNARE EX' with board 'X299 DESIGNARE EX-CF'
0:108  0:000  === [ GetCPUProperties ] ==================================
0:108  0:000  CPU Vendor = 756E6547 Model=50654
0:108  0:000   The CPU supported SSE4.1
0:108  0:000  BrandString = Intel(R) Core(TM) i9-7980XE CPU @ 2.60GHz
0:108  0:000   The CPU supported turbo
0:108  0:000  MSR 0x35               80010
0:108  0:000   TSC/CCC Information Leaf:
0:108  0:000    numerator     : 216
0:108  0:000    denominator   : 2
0:108  0:000   Calibrated ARTFrequency: 24003403
0:108  0:000  MSR 0xE2 before patch 00000402
0:108  0:000  MSR 0xCE              00070C2C_F3011A00
0:108  0:000  MSR 0x1B0             00000000
0:108  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:108  0:000  MaxDiv/MinDiv: 26.0/12
0:108  0:000  Turbo: 44/44/44/44
0:108  0:000  Features: 0xBFEBFBFF
0:108  0:000  Threads: 16
0:108  0:000  Cores: 8
0:108  0:000  FSB: 100 MHz
0:108  0:000  CPU: 2600 MHz
0:108  0:000  TSC: 2600 MHz
0:108  0:000  PIS: 100 MHz
0:108  0:000  ExternalClock: 25 MHz
0:108  0:000  === [ GetDevices ] ========================================
0:108  0:000  PCI (00|00:00.00) : 8086 2020 class=060000
0:108  0:000  PCI (00|00:04.00) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.01) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.02) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.03) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.04) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.05) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.06) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:04.07) : 8086 2021 class=088000
0:108  0:000  PCI (00|00:05.00) : 8086 2024 class=088000
0:108  0:000  PCI (00|00:05.01) : FFFF FFFF class=FFFFFF
0:108  0:000  PCI (00|00:05.02) : 8086 2025 class=088000
0:108  0:000  PCI (00|00:05.04) : 8086 2026 class=080020
0:108  0:000  PCI (00|00:05.06) : FFFF FFFF class=FFFFFF
0:108  0:000  PCI (00|00:07.00) : FFFF FFFF class=FFFFFF
0:108  0:000  PCI (00|00:07.04) : FFFF FFFF class=FFFFFF
0:108  0:000  PCI (00|00:07.07) : FFFF FFFF class=FFFFFF
0:108  0:000  PCI (00|00:08.00) : 8086 2014 class=088000
0:108  0:000  PCI (00|00:08.01) : 8086 2015 class=110100
0:108  0:000  PCI (00|00:08.02) : 8086 2016 class=088000
0:108  0:000  PCI (00|00:14.00) : 8086 A2AF class=0C0330
0:108  0:000  PCI (00|00:16.00) : 8086 A2BA class=078000
0:108  0:000  PCI (00|00:17.00) : 8086 A282 class=010601
0:108  0:000  PCI (00|00:1B.00) : 8086 A2E7 class=060400
0:108  0:000  PCI (00|00:1C.00) : 8086 A290 class=060400
0:108  0:000  PCI (00|02:00.00) : 8086 24FD class=028000
0:108  0:000   - WIFI: Vendor=Intel
0:108  0:000  PCI (00|00:1C.01) : 8086 A291 class=060400
0:108  0:000  PCI (00|03:00.00) : 1B21 0612 class=010601
0:108  0:000  PCI (00|00:1C.02) : 8086 A292 class=060400
0:108  0:000  PCI (00|04:00.00) : 8086 1539 class=020000
0:109  0:000   - LAN: 0 Vendor=Intel
0:109  0:000  PCI (00|00:1C.04) : 8086 A294 class=060400
0:109  0:000  PCI (00|00:1D.00) : 8086 A298 class=060400
0:109  0:000  PCI (00|47:00.00) : 144D A804 class=010802
0:109  0:000  PCI (00|00:1D.04) : 8086 A29C class=060400
0:109  0:000  PCI (00|48:00.00) : 1B21 2142 class=0C0330
0:109  0:000  PCI (00|00:1F.00) : 8086 A2D2 class=060100
0:109  0:000  PCI (00|00:1F.02) : 8086 A2A1 class=058000
0:109  0:000  PCI (00|00:1F.03) : 8086 A2F0 class=040300
0:109  0:000  PCI (00|00:1F.04) : 8086 A2A3 class=0C0500
0:109  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:109  0:000   - LAN: 1 Vendor=Intel
0:109  0:000  PCI (00|A0:05.00) : 8086 2034 class=088000
0:109  0:000  PCI (00|A0:05.02) : 8086 2035 class=088000
0:109  0:000  PCI (00|A0:05.04) : 8086 2036 class=080020
0:109  0:000  PCI (00|A0:05.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:07.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:08.00) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.01) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.02) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.03) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.04) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.05) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.06) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:08.07) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.00) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.01) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.02) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.03) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.04) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.05) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.06) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:09.07) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:0A.00) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:0A.01) : 8086 208D class=088000
0:109  0:000  PCI (00|A0:0E.00) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.01) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.02) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.03) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.04) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.05) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.06) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0E.07) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.00) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.01) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.02) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.03) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.04) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.05) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.06) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:0F.07) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:10.00) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:10.01) : 8086 208E class=088000
0:109  0:000  PCI (00|A0:14.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.05) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:14.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.05) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:15.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:16.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:16.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1D.00) : 8086 2054 class=088000
0:109  0:000  PCI (00|A0:1D.01) : 8086 2055 class=088000
0:109  0:000  PCI (00|A0:1D.02) : 8086 2056 class=088000
0:109  0:000  PCI (00|A0:1D.03) : 8086 2057 class=088000
0:109  0:000  PCI (00|A0:1E.00) : 8086 2080 class=088000
0:109  0:000  PCI (00|A0:1E.01) : 8086 2081 class=088000
0:109  0:000  PCI (00|A0:1E.02) : 8086 2082 class=088000
0:109  0:000  PCI (00|A0:1E.03) : 8086 2083 class=088000
0:109  0:000  PCI (00|A0:1E.04) : 8086 2084 class=088000
0:109  0:000  PCI (00|A0:1E.05) : 8086 2085 class=088000
0:109  0:000  PCI (00|A0:1E.06) : 8086 2086 class=088000
0:109  0:000  PCI (00|A0:1F.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.05) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|A0:1F.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:00.00) : 8086 2030 class=060400
0:109  0:000  PCI (00|C1:00.00) : 10DE 1B06 class=030000
0:109  0:000   - GFX: Model=MSI GeForce GTX 1080 Ti family 132 (Nvidia)
0:109  0:000  PCI (00|C1:00.01) : 10DE 10EF class=040300
0:109  0:000   - HDMI Audio:
0:109  0:000  PCI (00|C0:05.00) : 8086 2034 class=088000
0:109  0:000  PCI (00|C0:05.02) : 8086 2035 class=088000
0:109  0:000  PCI (00|C0:05.04) : 8086 2036 class=080020
0:109  0:000  PCI (00|C0:05.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:07.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:08.00) : 8086 2066 class=088000
0:109  0:000  PCI (00|C0:08.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:09.00) : 8086 2066 class=088000
0:109  0:000  PCI (00|C0:09.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|C0:0A.00) : 8086 2040 class=088000
0:109  0:000  PCI (00|C0:0A.01) : 8086 2041 class=088000
0:109  0:000  PCI (00|C0:0A.02) : 8086 2042 class=088000
0:109  0:000  PCI (00|C0:0A.03) : 8086 2043 class=088000
0:109  0:000  PCI (00|C0:0A.04) : 8086 2044 class=088000
0:109  0:000  PCI (00|C0:0A.05) : 8086 2045 class=088000
0:109  0:000  PCI (00|C0:0A.06) : 8086 2046 class=088000
0:109  0:000  PCI (00|C0:0A.07) : 8086 2047 class=088000
0:109  0:000  PCI (00|C0:0B.00) : 8086 2048 class=088000
0:109  0:000  PCI (00|C0:0B.01) : 8086 2049 class=088000
0:109  0:000  PCI (00|C0:0B.02) : 8086 204A class=088000
0:109  0:000  PCI (00|C0:0B.03) : 8086 204B class=088000
0:109  0:000  PCI (00|C0:0C.00) : 8086 2040 class=088000
0:109  0:000  PCI (00|C0:0C.01) : 8086 2041 class=088000
0:109  0:000  PCI (00|C0:0C.02) : 8086 2042 class=088000
0:109  0:000  PCI (00|C0:0C.03) : 8086 2043 class=088000
0:109  0:000  PCI (00|C0:0C.04) : 8086 2044 class=088000
0:109  0:000  PCI (00|C0:0C.05) : 8086 2045 class=088000
0:109  0:000  PCI (00|C0:0C.06) : 8086 2046 class=088000
0:109  0:000  PCI (00|C0:0C.07) : 8086 2047 class=088000
0:109  0:000  PCI (00|C0:0D.00) : 8086 2048 class=088000
0:109  0:000  PCI (00|C0:0D.01) : 8086 2049 class=088000
0:109  0:000  PCI (00|C0:0D.02) : 8086 204A class=088000
0:109  0:000  PCI (00|C0:0D.03) : 8086 204B class=088000
0:109  0:000  PCI (00|E0:05.00) : 8086 2034 class=088000
0:109  0:000  PCI (00|E0:05.02) : 8086 2035 class=088000
0:109  0:000  PCI (00|E0:05.04) : 8086 2036 class=080020
0:109  0:000  PCI (00|E0:05.05) : 8086 201D class=010400
0:109  0:000  PCI (00|E0:05.06) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.00) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.01) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.02) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.04) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:07.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:12.00) : 8086 204C class=110100
0:109  0:000  PCI (00|E0:12.01) : 8086 204D class=110100
0:109  0:000  PCI (00|E0:12.02) : 8086 204E class=088000
0:109  0:000  PCI (00|E0:12.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:15.00) : 8086 2018 class=088000
0:109  0:000  PCI (00|E0:15.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:16.00) : 8086 2018 class=088000
0:109  0:000  PCI (00|E0:16.03) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:16.04) : 8086 2018 class=088000
0:109  0:000  PCI (00|E0:16.07) : FFFF FFFF class=FFFFFF
0:109  0:000  PCI (00|E0:17.00) : 8086 2018 class=088000
0:109  0:000  PCI (00|E0:17.03) : FFFF FFFF class=FFFFFF
0:109  0:000  === [ GetDefaultSettings ] ================================
0:109  0:000  Clover load options size = 0 bytes
0:126  0:016  EFI\CLOVER\config.plist loaded: Success
0:138  0:012  === [ GetListOfThemes ] ===================================
0:147  0:008  - [00]: HighSierra
0:149  0:002  - [01]: Lightness
0:156  0:006  - [02]: Carbon
0:158  0:002  - [03]: iclover
0:167  0:008  - [04]: Beauty
0:177  0:010  - [05]: chrome
0:187  0:009  - [06]: BGM
0:204  0:016  - [07]: dark
0:209  0:005  - [08]: El Capitan
0:215  0:006  - [09]: CrispyOSX
0:222  0:006  - [10]: random
0:225  0:002  - [10]: embedded
0:227  0:002  - [10]: mlcamp
0:230  0:002  === [ Found config plists ] ===============================
0:230  0:000  - config.plist
0:230  0:000  === [ GetEarlyUserSettings ] ==============================
0:230  0:000  timeout set to 3
0:230  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:230  0:000  KextsToPatch: 4 requested
0:230  0:000   - [00]: IOAHCIBlockStorage (SSD Trim Enabler) :: BinPatch :: data len: 10
0:230  0:000   - [01]: AppleUSBXHCIPCI (USB Port Limit Patch) :: BinPatch :: data len: 4
0:230  0:000   - patch disabled at config
0:230  0:000   - [02]: com.apple.driver.AppleHIDKeyboard (by Wern) :: PlistPatch :: data len: 21
0:230  0:000   - [03]: com.apple.driver.AppleHIDKeyboard (by Wern) :: PlistPatch :: data len: 21
0:230  0:000  KernelToPatch: 4 requested
0:230  0:000   - [00]: 10.13 Installer/Updater essential :: data len: 11
0:230  0:000   - [01]: Lilu 1.2.x debug :: data len: 6
0:230  0:000   - [02]: NoLabel :: data len: 12
0:230  0:000   - [03]: xcpm_core_scope_msrs © Pike R. Alpha :: data len: 12
0:230  0:000  Default theme: mlcamp
0:230  0:000  Hiding entries with string Preboot
0:230  0:000  Hiding entries with string Recovery
0:230  0:000  Hiding entries with string NO NAME
0:230  0:000  Hiding entries with string Legacy HD1
0:230  0:000  Hiding entries with string Legacy HD2
0:230  0:000  Hiding entries with string Legacy HD3
0:230  0:000  Hiding entries with string Legacy HD4
0:230  0:000  === [ LoadDrivers ] =======================================
0:233  0:003  Loading AppleImageCodec-64.efi  status=Success
0:239  0:005  Loading AppleUITheme-64.efi  status=Success
0:240  0:001  Loading DataHubDxe-64.efi  status=Success
0:242  0:001  Loading AppleKeyAggregator-64.efi  status=Success
0:244  0:001  Loading apfs.efi  status=Success
0:264  0:020   - driver needs connecting
0:264  0:000  Loading VBoxHfs-64.efi  status=Success
0:268  0:003   - driver needs connecting
0:268  0:000  Loading FSInject-64.efi  status=Success
0:271  0:002  Loading FirmwareVolume-64.efi  status=Success
0:272  0:001  Loading SMCHelper-64.efi  status=Success
0:273  0:000  Loading AptioMemoryFix.efi  status=Success
0:276  0:002  2 drivers needs connecting ...
0:276  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:276  0:000  APFS driver loaded
0:276  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
1:189  0:913  === [ InitScreen ] ========================================
1:189  0:000  SetScreenResolution: 2560x1440 - not found!
1:189  0:000  SetMaxResolution: found best mode 0: 3440x1440
1:453  0:264  Video mode change to mode #0: Success
1:453  0:000   - set
1:453  0:000  Console modes reported: 5, available modes:
1:453  0:000   - [01]: 80x25
1:453  0:000   - [02]: 80x50
1:453  0:000   - [03]: 100x31
1:453  0:000   - [04]: 127x33 (current mode)
1:453  0:000   - [05]: 100x60
1:453  0:000  SetScreenResolution: 3440x1440 - already set
1:453  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(1,GPT,5EE4A472-E7CE-4B2C-B5DC-99647E5453C5,0x28,0x64000)
1:454  0:000  Using embedded font: Success
1:455  0:000  === [ GetMacAddress ] =====================================
1:455  0:000  MAC address of LAN #0= E0:D5:5E:61:06:60:
1:455  0:000  MAC address of LAN #1= E0:D5:5E:61:06:62:
1:455  0:000  === [ ScanSPD ] ===========================================
1:455  0:000  SMBus device : 8086 A2A3 class=0C0500 status=Success
1:455  0:000  SMBus CmdReg: 0x1
1:455  0:000  Scanning SMBus [8086:A2A3], mmio: 0x9056A004, ioport: 0x4000, hostc: 0x11
1:455  0:000  Slots to scan [8]...
1:457  0:001  === [ GetAcpiTablesList ] =================================
1:469  0:012  Get Acpi Tables List from RSDT:
1:469  0:000   - [00]: FACP  A M I  len=132
1:469  0:000   - [01]: FPDT  A M I  len=68
1:469  0:000   - [02]: FIDT  A M I len=156
1:469  0:000   - [03]: SSDT  GSWApp len=31296
1:469  0:000   - [04]: UEFI  A M I  len=66
1:469  0:000   - [05]: MCFG  A M I len=60
1:469  0:000   - [06]: HPET  A M I  len=56
1:469  0:000   - [07]: APIC  A M I  len=1822
1:469  0:000   - [08]: MCFG  A M I  len=60
1:469  0:000   - [09]: MIGT  A M I  len=64
1:469  0:000   - [10]: MSCT  A M I  len=78
1:469  0:000   - [11]: PCCT  A M I  len=110
1:469  0:000   - [12]: RASF  A M I  len=48
1:469  0:000   - [13]: SLIT  A M I  len=108
1:469  0:000   - [14]: SRAT  A M I  len=2608
1:469  0:000   - [15]: SVOS  A M I  len=50
1:469  0:000   - [16]: WDDT  A M I  len=64
1:469  0:000   - [17]: OEM4  CPU  CST len=170610
1:469  0:000   - [18]: OEM1  CPU EIST len=43979
1:469  0:000   - [19]: OEM2  CPU  HWP len=27312
1:469  0:000   - [20]: SSDT  SSDT  PM len=54311
1:469  0:000   - [21]: NITR  A M I  len=113
1:469  0:000   - [22]: SSDT  A M I  len=2390
1:469  0:000   - [23]: LPIT  SKL len=148
1:469  0:000   - [24]: WSMT  SKL len=40
1:469  0:000   - [25]: WDAT  SKL len=308
1:469  0:000   - [26]: SSDT  sensrhub len=671
1:469  0:000   - [27]: SSDT  PtidDevc len=12290
1:469  0:000   - [28]: DBGP   len=52
1:469  0:000   - [29]: DBG2   len=84
1:469  0:000   - [30]: UEFI  RstUefiV len=92
1:469  0:000   - [31]: BGRT  A M I  len=56
1:469  0:000   - [32]: DMAR  A M I  len=224
1:469  0:000   - [33]: WSMT  A M I  len=40
1:469  0:000  Calibrated TSC Frequency = 2592367600 = 2592MHz
1:470  0:000  === [ GetUserSettings ] ===================================
1:470  0:000  Add 1 devices:
1:470  0:000   - [00]: [01:00.00]  (PCI THUNDERBOLT 1578 0)
1:470  0:000  USB FixOwnership: no
1:470  0:000  Dropping 3 tables:
1:470  0:000   - [00]: Drop table  signature="DMAR" (52414D44)
1:470  0:000           - set table: 52414D44,                0 to drop: yes
1:470  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
1:470  0:000           - set table: 54445353,   74734930757043 to drop: no
1:470  0:000   - [02]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
1:470  0:000           - set table: 54445353,       6D50757043 to drop: no
1:470  0:000   - final DSDT Fix mask=00000000
1:470  0:000  PatchesDSDT: 21 requested
1:470  0:000   - [00]: (CAVS -> HDEF) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [01]: (PC00 -> PCI0) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [02]: (SL05 -> GFX0) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [03]: (_OSI -> XOSI) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [04]: (EC0_ -> EC__) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [05]: (H_EC -> EC__) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [06]: (GBE1 -> ETH0) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [07]: (D0A4 -> ETH1) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [08]: (HEC1 -> IMEI) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [09]: (IDER->MEID) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [10]: (PMC1 -> PMCR) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [11]: (LPC0 -> LPCB) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [12]: (FPU_ -> MATH) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [13]: (TMR_ -> TIMR) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [14]: (PIC_ -> IPIC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [15]: (SLOC -> ARPT) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000    patch disabled at config
1:470  0:000   - [16]: (SL01 -> UPSB) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [17]: (_DSM -> XDSM) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [18]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000   - [19]: (change XHCI to XHC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000    patch disabled at config
1:470  0:000   - [20]: (change XHC1 to XHC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
1:470  0:000    patch disabled at config
1:470  0:000  PluginType: 1
1:470  0:000  Using ProductName from config: iMacPro1,1
1:470  0:000  Found same BiosVersion in clover and config
1:470  0:000  BiosVersion: IMP11.88Z.0064.B30.1712081714
1:470  0:000  BiosReleaseDate: 12/08/2017
1:470  0:000  Using FirmwareFeatures from config: 0xFD8FF53E
1:470  0:000  Using FirmwareFeaturesMask from config: 0xFF9FFF3F
1:470  0:000  Board-ID set from config as Mac-7BA5B2D9E42DDD94
1:470  0:000  BoardType: 0xA
1:470  0:000  ChassisType: 0x9
1:470  0:000  Converted CustomUUID 26856701-8442-5EC7-9037-BC55FB79283E
1:700  0:230  === [ ScanVolumes ] =======================================
1:700  0:000  Found 14 volumes with blockIO
1:700  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\USB(0x0,0x0)\USB(0x0,0x0)
1:700  0:000          Found optical drive
1:700  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\USB(0x0,0x0)\USB(0x2,0x0)
1:700  0:000          Found optical drive
1:700  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\USB(0x0,0x0)\USB(0x3,0x0)
1:700  0:000          Found optical drive
1:700  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x6,0x0)
1:705  0:004          Result of bootcode detection: bootable unknown (legacy)
1:705  0:000          USB volume
1:705  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x6,0x0)\HD(1,MBR,0x00245C46,0x3F,0x13986)
1:710  0:004          Result of bootcode detection: bootable unknown (legacy)
1:710  0:000          USB volume
1:710  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)
1:711  0:000          USB volume
1:711  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(1,GPT,5EE4A472-E7CE-4B2C-B5DC-99647E5453C5,0x28,0x64000)
1:712  0:000          Result of bootcode detection: bootable unknown (legacy)
1:712  0:000          USB volume
1:715  0:003          This is SelfVolume !!
1:715  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)
1:716  0:000          USB volume
1:716  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)
1:716  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(1,GPT,9155AE05-2E2F-4BB5-8BEC-D2E575F02407,0x800,0xE1000)
1:716  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:716  0:000          hiding this volume
1:716  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(2,GPT,6E672ECF-DA99-42AA-877C-8E9365154DB4,0xE1800,0x32000)
1:716  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:717  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(3,GPT,C69DE433-4B63-4607-8432-51A3D955A86A,0x113800,0x8000)
1:717  0:000          hiding this volume
1:717  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(4,GPT,0C599330-24B3-433A-BC77-3D68535CDD2E,0x11B800,0x3A26A000)
1:717  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:717  0:000          hiding this volume
1:717  0:000  - [13]: Volume: NVMe(0x1,00-00-00-00-00-00-00-01)
1:717  0:000  === [ InitTheme ] =========================================
1:722  0:005  Using theme 'mlcamp' (EFI\CLOVER\themes\mlcamp)
1:727  0:004  Loading font from ThemeDir: Success
1:727  0:000  Choosing theme mlcamp
1:727  0:000  after NVRAM boot-args=-v darkwake=1 npci=0x2000 keepsyms=1 debug=0x100
1:727  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:727  0:000  found AppleSMC protocol
1:798  0:070  Registered 16 SMC keys
1:800  0:002  === [ AddCustomEntries ] ==================================
1:800  0:000  Custom entry 0 FullTitle:"macOS High Sierra" Path:"\System\Library\CoreServices\boot.efi" Type:1 Flags:0x2 matching Volume:"E129ECAA-C4E4-46DF-A4CF-4AB1A83C1950"
1:800  0:000      Checking volume "CODEMETER" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0x6,0x0)\HD(1,MBR,0x00245C46,0x3F,0x13986)) ... skipped because media is ignored
1:800  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(1,GPT,5EE4A472-E7CE-4B2C-B5DC-99647E5453C5,0x28,0x64000)) ... skipped because media is ignored
1:800  0:000      Checking volume "USB" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)) ... skipped because media is ignored
1:800  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(2,GPT,6E672ECF-DA99-42AA-877C-8E9365154DB4,0xE1800,0x32000)) ... skipped
1:800  0:000  Custom entry 1 FullTitle:"Windows 10" Path:"\EFI\Microsoft\Boot\bootmgfw.efi" Options:"-s -h" Type:7 Flags:0x0 matching Volume:"C1034A04-B872-450F-BC69-8D6118A65A97"
1:800  0:000      Checking volume "CODEMETER" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0x6,0x0)\HD(1,MBR,0x00245C46,0x3F,0x13986)) ... skipped because media is ignored
1:800  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(1,GPT,5EE4A472-E7CE-4B2C-B5DC-99647E5453C5,0x28,0x64000)) ... skipped because media is ignored
1:800  0:000      Checking volume "USB" (PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)) ... skipped because media is ignored
1:800  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,E8-C8-B1-71-5A-38-25-00)\HD(2,GPT,6E672ECF-DA99-42AA-877C-8E9365154DB4,0xE1800,0x32000)) ... skipped
1:800  0:000  === [ ScanLoader ] ========================================
1:800  0:000  - [04]: 'CODEMETER'
1:800  0:000  - [06]: 'EFI'
1:805  0:004  - [07]: 'USB'
1:809  0:004          AddLoaderEntry for Volume Name=USB
1:820  0:010  - [10]: 'EFI'
1:822  0:001          AddLoaderEntry for Volume Name=EFI
1:826  0:004  === [ AddCustomTool ] =====================================
1:827  0:001  === [ GetEfiBootDeviceFromNvram ] =========================
1:828  0:001   - efi-boot-device-data: PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)\.IABootFiles\boot.efii
1:828  0:000    - Volume: 'PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)'
1:828  0:000    - LoaderPath: '\.IABootFiles\boot.efi'
1:828  0:000    - Guid = 6A02161D-2124-4038-BB91-1F9505FAF986
1:828  0:000  === [ FindStartupDiskVolume ] =============================
1:828  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x14,0x0)\USB(0xB,0x0)\HD(2,GPT,6A02161D-2124-4038-BB91-1F9505FAF986,0x64028,0x38A3FB0)
1:828  0:000     - searching for that partition and loader '\.IABootFiles\boot.efi'
1:828  0:000      - found entry 0. 'Boot OS X Install from USB', Volume 'USB', '\.IABootFiles\boot.efi'
1:828  0:000  Boot redirected to Entry 0. 'Boot OS X Install from USB'
1:828  0:000  DefaultIndex=0 and MainMenu.EntryCount=6
2:124  0:296  GUI ready
7:585  5:460          [!] Icon 7 (icons\func_help.png) not found (path: EFI\CLOVER\themes\mlcamp)
27:836  20:250  BootVariable of the entry is empty
27:836  0:000  === [ StartLoader ] =======================================
27:836  0:000  Finally: ExternalClock=24MHz BusSpeed=99706kHz CPUFreq=2592MHz PIS: hw.busfrequency=96000000Hz
27:836  0:000  Loading boot.efi  status=Success
28:147  0:310  GetOSVersion: 10.12
28:147  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
28:147  0:000  Filtering KextPatches:
28:147  0:000   - [00]: IOAHCIBlockStorage (SSD Trim Enabler) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
28:147  0:000   - [01]: AppleUSBXHCIPCI (USB Port Limit Patch) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> disabled by user
28:147  0:000   - [02]: com.apple.driver.AppleHIDKeyboard (by Wern) :: PlistPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
28:147  0:000   - [03]: com.apple.driver.AppleHIDKeyboard (by Wern) :: PlistPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
28:147  0:000  Filtering KernelPatches:
28:147  0:000   - [00]: 10.13 Installer/Updater essential :: [OS: 10.12 | MatchOS: All | MatchBuild: no] ==> allowed by OS
28:147  0:000   - [01]: Lilu 1.2.x debug :: [OS: 10.12 | MatchOS: All | MatchBuild: no] ==> disabled by user
28:147  0:000   - [02]: NoLabel :: [OS: 10.12 | MatchOS: All | MatchBuild: no] ==> disabled by user
28:147  0:000   - [03]: xcpm_core_scope_msrs © Pike R. Alpha :: [OS: 10.12 | MatchOS: All | MatchBuild: no] ==> allowed by OS
28:147  0:000  Will not patch boot.efi
28:147  0:000  === [ PatchSmbios ] =======================================
28:147  0:000  insert table 9 for dev 0:0
28:147  0:000  insert table 9 for dev 0:1
28:147  0:000  insert table 9 for dev 1F:6
28:147  0:000  insert table 9 for dev 0:0
28:148  0:000  Trusting SMBIOS...
28:148  0:000  Detected alternating SMBIOS channel banks
28:148  0:000  Channels: 3
28:148  0:000  Interleave: 0 2 4 1 3 5 6 8 10 7 9 11 12 14 16 13 15 17 18 20 22 19 21 23
28:148  0:000   partNum unknown
28:148  0:000  SMBIOS Type 17 Index = 0 => 0 0:
28:148  0:000  BANK 0 DIMM0 2400MHz 8192MB
28:148  0:000   partNum unknown
28:148  0:000  SMBIOS Type 17 Index = 1 => 1 2:
28:148  0:000  BANK 1 DIMM0 2400MHz 8192MB
28:148  0:000   partNum unknown
28:148  0:000  SMBIOS Type 17 Index = 2 => 2 4:
28:148  0:000  BANK 2 DIMM0 2400MHz 8192MB
28:148  0:000  SMBIOS Type 17 Index = 3 => 3 1:
28:148  0:000  BANK 0 DIMM1 EMPTY
28:148  0:000  SMBIOS Type 17 Index = 4 => 4 3:
28:148  0:000  BANK 1 DIMM1 EMPTY
28:148  0:000  SMBIOS Type 17 Index = 5 => 5 5:
28:148  0:000  BANK 2 DIMM1 EMPTY
28:148  0:000  SMBIOS Type 17 Index = 6 => 6 6:
28:148  0:000  BANK 0 DIMM2 EMPTY
28:148  0:000  SMBIOS Type 17 Index = 7 => 7 8:
28:148  0:000  BANK 1 DIMM2 EMPTY
28:148  0:000  mTotalSystemMemory = 24576
28:148  0:000  NumberOfMemoryDevices = 8
28:148  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
28:148  0:000  Type20[1]->End = 0xFFFFFF, Type17[1] = 0x6000
28:148  0:000  Type20[2]->End = 0x17FFFFF, Type17[2] = 0xC000
28:148  0:000  Table 131 is present, CPUType=31
28:148  0:000  Change to: 705
28:148  0:000  === [ PatchACPI ] =========================================
28:148  0:000  Xsdt reallocation done
28:148  0:000  old FADT length=114
28:148  0:000   SignatureFixup: 0xAE48BB11 -> 0x0
28:148  0:000  Apply DsdtFixMask=0x00000000
28:148  0:000     drop _DSM mask=0x0000
28:148  0:000  === [ FixBiosDsdt ] =======================================
28:148  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
28:148  0:000  USBADR[1] = 0x1D0004 and PCIe = 0x0
28:158  0:009  Audio HDA (addr:0x1F0003) setting specified layout-id=11 (0xB)
28:158  0:000  VideoCard devID=0x1B0610DE
28:158  0:000  DisplayADR1[0] = 0x0, DisplayADR2[0] = 0x0
28:158  0:000  Patching DSDT:
28:158  0:000   - [CAVS -> HDEF]: pattern 43415653, patched at: [ (AF5A) (987F) (CAC) (8F) ]
28:158  0:000   - [PC00 -> PCI0]: pattern 50433030, patched at: [ (1C) (12) (43) (12) (12) (16) (16) (16) (16) (12) (F52) (10) (F) (22) (10) (4C15) (73) (43) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (1A) (31A4) (9DD6) (14) (22) (10) (2A) (18) (3F5) (66) (5C0) (D1A) (F) (F) (1C) (14) (10) (E) (3FF) (34) (127) (B9) (132) (12E) (B4) (84) (2F) (2F) (15E) (A5) (5486) (F32) (F6C) (161) (1FB) (DA) (13) (A9) (13) (A6) (13) (A6) (13) (A6) (13) (A6) (13) (A6) (A8) (A8) (E4) (E4) (10EC) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (12) (14) (10) (50) (53C) ]
28:158  0:000   - [SL05 -> GFX0]: pattern 534C3035, patched at: [ (DE72) ]
28:158  0:000   - [_OSI -> XOSI]: pattern 5F4F5349, patched at: [ (3CB) (3) (17) (19) (12) (10) (12) (1B) (1B) (1B) (17) (1B) (17) (17) (346) (3) (1D) (19) (1B) (17) (19) (1B) (17) (17) (17) (17) (17) (12) (10) ]
28:159  0:000   - [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:159  0:000   - [H_EC -> EC__]: pattern 485F4543, bin not found / already patched!
28:159  0:000   - [GBE1 -> ETH0]: pattern 47424531, patched at: [ (AF8D) (985F) (5DF) (87) ]
28:159  0:000   - [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:159  0:000   - [HEC1 -> IMEI]: pattern 48454331, patched at: [ (9BB9) ]
28:159  0:000   - [IDER->MEID]: pattern 49444552, patched at: [ (9BDB) ]
28:159  0:000   - [PMC1 -> PMCR]: pattern 504D4331, patched at: [ (AF49) (9B88) (178) (34) ]
28:160  0:000   - [LPC0 -> LPCB]: pattern 4C504330, patched at: [ (9FEE) (8FF7) (14) (22) (10) (2A) (18) (19C6) (B23) (11) (F) (F) ]
28:160  0:000   - [FPU_ -> MATH]: pattern 4650555F, patched at: [ (A0CE) ]
28:160  0:000   - [TMR_ -> TIMR]: pattern 544D525F, patched at: [ (A0F5) ]
28:160  0:000   - [PIC_ -> IPIC]: pattern 5049435F, patched at: [ (A09C) ]
28:160  0:000   - [SLOC -> ARPT]: disabled
28:160  0:000   - [SL01 -> UPSB]: pattern 534C3031, patched at: [ (BA64) ]
28:160  0:000   - [_DSM -> XDSM]: pattern 5F44534D, patched at: [ (7D0) (14281) (82) (53) (2A3) (11C) (732) (11) (55) (22) (21) (16) (14) (FC) (364) (35F) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (364) (27F) (F32) (146F) (C0) (BD) (BD) (BD) (BD) (A8) (A8) (B6) (E4) (E4) (2040) ]
28:160  0:000   - [Rename HDAS to HDEF]: pattern 48444153, patched at: [ (1550E) (BC) (6D) ]
28:161  0:000   - [change XHCI to XHC]: disabled
28:161  0:000   - [change XHC1 to XHC]: disabled
28:161  0:000  first CPU found at 2F2F offset 2F33
28:161  0:000  device candidate at 2E96
28:161  0:000  device inserted in acpi_cpu_score SCK0
28:161  0:000  score candidate at 113B
28:161  0:000  score inserted in acpi_cpu_score _SB_SCK0
28:161  0:000  Found ACPI CPU: CP00 | CP01 | CP02 | CP03 | CP04 | CP05 | CP06 | CP07 | CP08 | CP09 | CP0A | CP0B | CP0C | CP0D | CP0E | CP0F | CP10 | CP11 | CP12 | CP13 | CP14 | CP15 | CP16 | CP17 | CP18 | CP19 | CP1A | CP1B | CP1C | CP1D | CP1E | CP1F , within the score: _SB_SCK0
28:161  0:000  Found PCIROOTUID = 0
28:161  0:000  PreCleanup XSDT: count=34, length=308
28:161  0:000  PreCleanup XSDT, corrected XSDT: count=34, length=308
28:161  0:000  === [ ACPIDropTables ] ====================================
28:161  0:000  Drop tables from XSDT, SIGN=DMAR TableID=A M I  Length=224
28:161  0:000   Table[32]: DMAR  A M I   224 dropped
28:161  0:000  === [ PatchAllSSDT ] ======================================
28:161  0:000  Patch table: SSDT  GSWApp len=0x7A40
28:161  0:000  0. [CAVS -> HDEF]: pattern 43415653, bin not found / already patched!
28:161  0:000  1. [PC00 -> PCI0]: pattern 50433030, bin not found / already patched!
28:161  0:000  2. [SL05 -> GFX0]: pattern 534C3035, bin not found / already patched!
28:161  0:000  3. [_OSI -> XOSI]: pattern 5F4F5349, bin not found / already patched!
28:161  0:000  4. [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:161  0:000  5. [H_EC -> EC__]: pattern 485F4543, bin not found / already patched!
28:161  0:000  6. [GBE1 -> ETH0]: pattern 47424531, bin not found / already patched!
28:161  0:000  7. [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:161  0:000  8. [HEC1 -> IMEI]: pattern 48454331, bin not found / already patched!
28:161  0:000  9. [IDER->MEID]: pattern 49444552, bin not found / already patched!
28:161  0:000  10. [PMC1 -> PMCR]: pattern 504D4331, bin not found / already patched!
28:161  0:000  11. [LPC0 -> LPCB]: pattern 4C504330, bin not found / already patched!
28:161  0:000  12. [FPU_ -> MATH]: pattern 4650555F, bin not found / already patched!
28:161  0:000  13. [TMR_ -> TIMR]: pattern 544D525F, bin not found / already patched!
28:162  0:000  14. [PIC_ -> IPIC]: pattern 5049435F, bin not found / already patched!
28:162  0:000  15. [SLOC -> ARPT]: disabled
28:162  0:000  16. [SL01 -> UPSB]: pattern 534C3031, bin not found / already patched!
28:162  0:000  17. [_DSM -> XDSM]: pattern 5F44534D, bin not found / already patched!
28:162  0:000  18. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!
28:162  0:000  19. [change XHCI to XHC]: disabled
28:162  0:000  20. [change XHC1 to XHC]: disabled
28:162  0:000  Patch table: SSDT  SSDT  PM len=0xD427
28:162  0:000  0. [CAVS -> HDEF]: pattern 43415653, bin not found / already patched!
28:162  0:000  1. [PC00 -> PCI0]: pattern 50433030, bin not found / already patched!
28:162  0:000  2. [SL05 -> GFX0]: pattern 534C3035, bin not found / already patched!
28:162  0:000  3. [_OSI -> XOSI]: pattern 5F4F5349, bin not found / already patched!
28:162  0:000  4. [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:162  0:000  5. [H_EC -> EC__]: pattern 485F4543, bin not found / already patched!
28:162  0:000  6. [GBE1 -> ETH0]: pattern 47424531, bin not found / already patched!
28:162  0:000  7. [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:162  0:000  8. [HEC1 -> IMEI]: pattern 48454331, bin not found / already patched!
28:162  0:000  9. [IDER->MEID]: pattern 49444552, bin not found / already patched!
28:162  0:000  10. [PMC1 -> PMCR]: pattern 504D4331, bin not found / already patched!
28:162  0:000  11. [LPC0 -> LPCB]: pattern 4C504330, bin not found / already patched!
28:162  0:000  12. [FPU_ -> MATH]: pattern 4650555F, bin not found / already patched!
28:162  0:000  13. [TMR_ -> TIMR]: pattern 544D525F, bin not found / already patched!
28:162  0:000  14. [PIC_ -> IPIC]: pattern 5049435F, bin not found / already patched!
28:163  0:000  15. [SLOC -> ARPT]: disabled
28:163  0:000  16. [SL01 -> UPSB]: pattern 534C3031, bin not found / already patched!
28:163  0:000  17. [_DSM -> XDSM]: pattern 5F44534D, bin not found / already patched!
28:163  0:000  18. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!
28:163  0:000  19. [change XHCI to XHC]: disabled
28:163  0:000  20. [change XHC1 to XHC]: disabled
28:163  0:000  Patch table: SSDT  A M I  len=0x956
28:163  0:000  0. [CAVS -> HDEF]: pattern 43415653, bin not found / already patched!
28:163  0:000  1. [PC00 -> PCI0]: pattern 50433030, patched at: [ (1C) (12) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (1F) (9C) (33) (33) (33) (33) (33) (33) (33) (33) (33) (34) (4D) (33) (34) (4D) (33) (33) (33) (33) (33) (33) (33) (33) (33) (33) (33) ]
28:163  0:000  2. [SL05 -> GFX0]: pattern 534C3035, bin not found / already patched!
28:163  0:000  3. [_OSI -> XOSI]: pattern 5F4F5349, bin not found / already patched!
28:163  0:000  4. [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:163  0:000  5. [H_EC -> EC__]: pattern 485F4543, bin not found / already patched!
28:163  0:000  6. [GBE1 -> ETH0]: pattern 47424531, bin not found / already patched!
28:163  0:000  7. [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:163  0:000  8. [HEC1 -> IMEI]: pattern 48454331, bin not found / already patched!
28:163  0:000  9. [IDER->MEID]: pattern 49444552, bin not found / already patched!
28:163  0:000  10. [PMC1 -> PMCR]: pattern 504D4331, bin not found / already patched!
28:163  0:000  11. [LPC0 -> LPCB]: pattern 4C504330, bin not found / already patched!
28:163  0:000  12. [FPU_ -> MATH]: pattern 4650555F, bin not found / already patched!
28:163  0:000  13. [TMR_ -> TIMR]: pattern 544D525F, bin not found / already patched!
28:163  0:000  14. [PIC_ -> IPIC]: pattern 5049435F, bin not found / already patched!
28:163  0:000  15. [SLOC -> ARPT]: disabled
28:163  0:000  16. [SL01 -> UPSB]: pattern 534C3031, bin not found / already patched!
28:163  0:000  17. [_DSM -> XDSM]: pattern 5F44534D, bin not found / already patched!
28:163  0:000  18. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!
28:163  0:000  19. [change XHCI to XHC]: disabled
28:163  0:000  20. [change XHC1 to XHC]: disabled
28:163  0:000  Patch table: SSDT  sensrhub len=0x29F
28:163  0:000  0. [CAVS -> HDEF]: pattern 43415653, bin not found / already patched!
28:163  0:000  1. [PC00 -> PCI0]: pattern 50433030, bin not found / already patched!
28:163  0:000  2. [SL05 -> GFX0]: pattern 534C3035, bin not found / already patched!
28:163  0:000  3. [_OSI -> XOSI]: pattern 5F4F5349, bin not found / already patched!
28:163  0:000  4. [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:163  0:000  5. [H_EC -> EC__]: pattern 485F4543, bin not found / already patched!
28:163  0:000  6. [GBE1 -> ETH0]: pattern 47424531, bin not found / already patched!
28:163  0:000  7. [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:163  0:000  8. [HEC1 -> IMEI]: pattern 48454331, bin not found / already patched!
28:163  0:000  9. [IDER->MEID]: pattern 49444552, bin not found / already patched!
28:163  0:000  10. [PMC1 -> PMCR]: pattern 504D4331, bin not found / already patched!
28:163  0:000  11. [LPC0 -> LPCB]: pattern 4C504330, bin not found / already patched!
28:163  0:000  12. [FPU_ -> MATH]: pattern 4650555F, bin not found / already patched!
28:163  0:000  13. [TMR_ -> TIMR]: pattern 544D525F, bin not found / already patched!
28:163  0:000  14. [PIC_ -> IPIC]: pattern 5049435F, bin not found / already patched!
28:163  0:000  15. [SLOC -> ARPT]: disabled
28:163  0:000  16. [SL01 -> UPSB]: pattern 534C3031, bin not found / already patched!
28:163  0:000  17. [_DSM -> XDSM]: pattern 5F44534D, patched at: [ (A5) ]
28:163  0:000  18. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!
28:163  0:000  19. [change XHCI to XHC]: disabled
28:163  0:000  20. [change XHC1 to XHC]: disabled
28:163  0:000  Patch table: SSDT  PtidDevc len=0x3002
28:163  0:000  0. [CAVS -> HDEF]: pattern 43415653, bin not found / already patched!
28:163  0:000  1. [PC00 -> PCI0]: pattern 50433030, bin not found / already patched!
28:163  0:000  2. [SL05 -> GFX0]: pattern 534C3035, bin not found / already patched!
28:163  0:000  3. [_OSI -> XOSI]: pattern 5F4F5349, bin not found / already patched!
28:163  0:000  4. [EC0_ -> EC__]: pattern 4543305F, bin not found / already patched!
28:163  0:000  5. [H_EC -> EC__]: pattern 485F4543, patched at: [ (24) (57) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (3A) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (16) (B4D) (17) (14) (25) (14) (25) (14) (25) (14) (25) (14) (25) (14) (25) (14) (3E) (1A) (14) (24) (14) (24) (14) (24) (14) (24) (14) (11E) (17) (14) (25) (14) (25) (14) (25) (14) (25) (14) (25) (14) (25) (14) (25) (14) (56) (1A) (14) (24) (14) (24) (14) (24) (14) (8D) (15) (14) (1B) (14) (1D) (14) (1C) (14) (1E) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (35) (14) (16) (14) (44) (4E) (14) (1B) (14) (1B) (14) (1D) (14) (20) (14) (20) (14) (20) (14) (20) (14) (4F) (14) (1B) (14) (1B) (14) (1D) (14) (20) (14) (20) (14) (20) (14) (AE) (15) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (1C) (14) (3A) (14) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (1A) (13) (21) (14) (21) (14) (23) (15) (14) (25) (15) (14) (19) (14) (1D) (14) (1D) (14) ]
28:163  0:000  6. [GBE1 -> ETH0]: pattern 47424531, bin not found / already patched!
28:163  0:000  7. [D0A4 -> ETH1]: pattern 44304134, bin not found / already patched!
28:163  0:000  8. [HEC1 -> IMEI]: pattern 48454331, bin not found / already patched!
28:163  0:000  9. [IDER->MEID]: pattern 49444552, bin not found / already patched!
28:163  0:000  10. [PMC1 -> PMCR]: pattern 504D4331, bin not found / already patched!
28:163  0:000  11. [LPC0 -> LPCB]: pattern 4C504330, bin not found / already patched!
28:163  0:000  12. [FPU_ -> MATH]: pattern 4650555F, bin not found / already patched!
28:163  0:000  13. [TMR_ -> TIMR]: pattern 544D525F, bin not found / already patched!
28:163  0:000  14. [PIC_ -> IPIC]: pattern 5049435F, bin not found / already patched!
28:163  0:000  15. [SLOC -> ARPT]: disabled
28:163  0:000  16. [SL01 -> UPSB]: pattern 534C3031, bin not found / already patched!
28:163  0:000  17. [_DSM -> XDSM]: pattern 5F44534D, bin not found / already patched!
28:163  0:000  18. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!
28:163  0:000  19. [change XHCI to XHC]: disabled
28:163  0:000  20. [change XHC1 to XHC]: disabled
28:163  0:000  Out of control with CPU numbers
28:163  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=16
28:163  0:000  Cleanup XSDT: count=34, length=308
28:163  0:000  corrected XSDT count=33, length=300
28:163  0:000  === [ RestSetup macOS ] ===================================
28:163  0:000  EdidDiscovered size=256
28:163  0:000  --- Discovered EDID Table size:256
28:163  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  69
28:163  0:000  010  |  33  34  52  25  00  00  1F  1B  01  04
28:163  0:000  020  |  A5  50  22  78  06  EE  91  A3  54  4C
28:163  0:000  030  |  99  26  0F  50  54  21  08  00  01  01
28:163  0:000  040  |  01  01  01  01  01  01  01  01  01  01
28:163  0:000  050  |  01  01  01  01  E7  7C  70  A0  D0  A0
28:163  0:000  060  |  29  50  30  20  3A  00  1E  4F  31  00
28:163  0:000  070  |  00  1A  00  00  00  FF  00  23  41  53
28:163  0:000  080  |  4D  37  51  77  62  6F  45  32  54  64
28:163  0:000  090  |  00  00  00  FD  00  1E  64  49  97  36
28:163  0:000  100  |  01  0A  20  20  20  20  20  20  00  00
28:163  0:000  110  |  00  FC  00  52  4F  47  20  50  47  33
28:163  0:000  120  |  34  38  51  0A  20  20  01  A4  02  03
28:163  0:000  130  |  12  41  23  09  07  01  83  01  00  00
28:163  0:000  140  |  65  4B  04  00  01  01  9D  67  70  A0
28:163  0:000  150  |  D0  A0  22  50  30  20  3A  00  1E  4F
28:163  0:000  160  |  31  00  00  1A  A0  CF  70  50  D0  A0
28:163  0:000  170  |  46  50  08  20  88  0C  1E  4F  31  00
28:163  0:000  180  |  00  1A  2C  C9  70  A0  D0  A0  42  50
28:163  0:000  190  |  30  20  3A  00  1E  4F  31  00  00  1A
28:163  0:000  200  |  23  BE  70  A0  D0  A0  3F  50  30  20
28:163  0:000  210  |  3A  00  1E  4F  31  00  00  1A  1A  B3
28:163  0:000  220  |  70  A0  D0  A0  3B  50  30  20  3A  00
28:163  0:000  230  |  1E  4F  31  00  00  1A  43  A8  70  A0
28:163  0:000  240  |  D0  A0  38  50  30  20  3A  00  1E  4F
28:163  0:000  250  |  31  00  00  1A  00  8F
28:164  0:000   RCBA disabled; cannot use it
28:164  0:000   setting specified layout-id=11 (0xB)
28:164  0:000  NVidia GFX injection not set
28:164  0:000  stringlength = 656
28:164  0:000  CurrentMode: Width=3440 Height=1440
28:164  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 311C4198
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 311C4198
28:172  0:007  Use origin smbios table type 1 guid.
28:185  0:013  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
28:185  0:000  Extra kext: EFI\CLOVER\kexts\Other\X299USB.kext (v.<null string>)
28:195  0:010  Extra kext: EFI\CLOVER\kexts\Other\BrcmPatchRAM2.kext (v.2.2.7)
28:244  0:048  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1448)
28:257  0:012  Extra kext: EFI\CLOVER\kexts\Other\SmallTree-Intel-211-AT-PCIe-GBE.kext (v.1.0.6)
28:269  0:012  Extra kext: EFI\CLOVER\kexts\Other\FakePCIID_Broadcom_WiFi.kext (v.1.3.11)
28:276  0:007  Extra kext: EFI\CLOVER\kexts\Other\FakePCIID.kext (v.1.3.11)
28:280  0:003  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.1.4)
28:290  0:010  Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext (v.2.3.0)
28:298  0:008  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.2.2)
28:328  0:029    |-- PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext (v.1.0.0)
28:543  0:214  Extra kext: EFI\CLOVER\kexts\Other\TSCAdjustReset.kext (v.1.1)
28:554  0:011  Extra kext: EFI\CLOVER\kexts\Other\BrcmFirmwareData.kext (v.2.2.7)
28:622  0:067  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.2)
28:632  0:010  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
28:634  0:001  SetStartupDiskVolume:
28:634  0:000    * Volume: 'USB'
28:634  0:000    * LoaderPath: '\.IABootFiles\boot.efi'
28:634  0:000    * DevPath: USB
28:634  0:000    * GUID = 6A02161D-2124-4038-BB91-1F9505FAF986
28:635  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>6A02161D-2124-4038-BB91-1F9505FAF986</string></dict></dict></dict></array>
28:635  0:000  Custom boot screen not used because entry has unset use graphics
28:637  0:001  Closing log
 
Quick question, building an Asus Prime X299 Deluxe, i9-7980xe, machine for the audio studio.
since it's for audio editing, don't want to invest in high-end GPU.
what is the natively supported and lesser priced GPU?
bellow 450$.
Hi Ho

Nvidia 1050 or 1060 should do for your build.
Not native supported, but via the Nvidia driver.
For the AMD Cards I am not sure how far you can go down to keep them supported and reach your price tag

All the Best
Frank
 
Hi,
I need help with my rig :(. I have several issues with USB, PCI Implementation and Power Management. Simply play a web video freezes the computer.
I´d followed this guide step by step but the IOREG assumes PCI Slot configuration diferent from other people in this thread and when I try to compile the DSDT.aml respond with errors. I am doing something wrong.:(

thanks in advance
Hi Ho

I might have missed some thing, but so far I did not have to compile DSDT.aml
If you are trying to build the SSDT.aml for your board then make sure you do it in small steps.
get one device implemented and then the next one.
Even though I have a complete different boarent board, I used @kgp ssd.aml as a sample and worked step by step through the E section of the guide. Thus my ssd.aml started with only one device (which I copied from the sample) where I checked in IORegistry editor that PCI Path (and names) and adjusted in in ssd.aml. compiling it (without error) and then restart to see if it is working.
Read carefully the guide of @kgp and be patient. It took me some time and several times reading to understand the process.

All the Best
Frank
 
Hello All,

I would like some help with my rig. For the most part everything is running smoothly however I'm having trouble editing the SSDT-X299-iMacPro.aml for my rig.

Currently I have a GPU in SLOT-1, the OSX Wifi card in SLOT-3, my second GPU in SLOT-4, and the PCI Thunderbolt card in SLOT-6.

Following @kgp 's guide and using IORegistryExplorer I got all the required information and made the required changes. But for whatever reason my system report isn't changing. I've got to be making a mistake somewhere that I'm not seeing. Unfortunately I'm not very experienced with SSDT editing.

I'm attaching my edited iMacPro.aml as well as a screen capture of my system report. Any help or pointing in the right direction would be greatly appreciated.
 

Attachments

  • Screen Shot 2018-04-18 at 23.22.24.png
    Screen Shot 2018-04-18 at 23.22.24.png
    125.3 KB · Views: 124
  • SSDT-X299-iMacPro.aml
    7.5 KB · Views: 77
Hi Ho

Nvidia 1050 or 1060 should do for your build.
Not native supported, but via the Nvidia driver.
For the AMD Cards I am not sure how far you can go down to keep them supported and reach your price tag

All the Best
Frank


Thank you frank
 
Last edited:
Yes, hence why I'd like to know what gigabyte is doing any different in regards to power management. This will be in the DSDT

Hey so this is regarding the Bluetooth keyboard.

I had a chance to connect the wireless Apple keyboard (the one with 2 batteries) with the internal BT card.

So here are a few things I noticed.

1) It won't allow sleep to work
2) macOS didn't automatically find it like a real Mac would.
3) I cannot use it in the clover menu or BIOS (It may be fixable).

For #3 I googled around and it seems that the BT dongle must support something called "HID Proxy" which allows driverless loading of the device. So in other words, one of those OSXWifi PCIe cards (that have MacBook Air modules) will work natively (in theory). I have a OSXWifi card around but I'm too lazy to pop it in and check.

So in other words, it seems (once again from theory) that if you want to have Sleep and HID Proxy support then you need to use OSXWifi.

I'm curious to see if there is some type of fix for this as I really want to get the Space Gray iMac Pro keyboard soon that Apple sells now, which is completely wireless.

But besides these issues, the wireless Apple keyboard works fine with the current BT/Wifi card from Broadcom. I never put my system to sleep anyway (just let the monitors sleep within 2 mins or using a hot corner) so it's not a big deal for me. However, at least having the ability to use it in the clover menu would be nice since I boot into Windows sometimes.
 
Hey so this is regarding the Bluetooth keyboard.

I had a chance to connect the wireless Apple keyboard (the one with 2 batteries) with the internal BT card.

So here are a few things I noticed.

1) It won't allow sleep to work
2) macOS didn't automatically find it like a real Mac would.
3) I cannot use it in the clover menu or BIOS (It may be fixable).

For #3 I googled around and it seems that the BT dongle must support something called "HID Proxy" which allows driverless loading of the device. So in other words, one of those OSXWifi PCIe cards (that have MacBook Air modules) will work natively (in theory). I have a OSXWifi card around but I'm too lazy to pop it in and check.

So in other words, it seems (once again from theory) that if you want to have Sleep and HID Proxy support then you need to use OSXWifi.

I'm curious to see if there is some type of fix for this as I really want to get the Space Gray iMac Pro keyboard soon that Apple sells now, which is completely wireless.

But besides these issues, the wireless Apple keyboard works fine with the current BT/Wifi card from Broadcom. I never put my system to sleep anyway (just let the monitors sleep within 2 mins or using a hot corner) so it's not a big deal for me. However, at least having the ability to use it in the clover menu would be nice since I boot into Windows sometimes.

Sleeping causes more issues than just problem with the wireless keyboard. You can see that the card isn't put back in a working state. When you go into the BT preferences, it says your machine is now discoverable. But that's no longer true. Using another machine no longer displays the Hack in the list of available device.
Only rebooting under Windows fixes it.

Ill see if the OSXWIFI card fixes this problem. Seems like a driver issue to me
 
Hey so this is regarding the Bluetooth keyboard.

I had a chance to connect the wireless Apple keyboard (the one with 2 batteries) with the internal BT card.

So here are a few things I noticed.

1) It won't allow sleep to work
2) macOS didn't automatically find it like a real Mac would.
3) I cannot use it in the clover menu or BIOS (It may be fixable).

For #3 I googled around and it seems that the BT dongle must support something called "HID Proxy" which allows driverless loading of the device. So in other words, one of those OSXWifi PCIe cards (that have MacBook Air modules) will work natively (in theory). I have a OSXWifi card around but I'm too lazy to pop it in and check.

So in other words, it seems (once again from theory) that if you want to have Sleep and HID Proxy support then you need to use OSXWifi.

I'm curious to see if there is some type of fix for this as I really want to get the Space Gray iMac Pro keyboard soon that Apple sells now, which is completely wireless.

But besides these issues, the wireless Apple keyboard works fine with the current BT/Wifi card from Broadcom. I never put my system to sleep anyway (just let the monitors sleep within 2 mins or using a hot corner) so it's not a big deal for me. However, at least having the ability to use it in the clover menu would be nice since I boot into Windows sometimes.

The OSXWifi PCIe adaptor works fully native and perfectly fine with the rechargeable (Lightning to USB cable) Apple Magic Wireless Keyboard MLA22LL.

Full Sleep/Wake-, Clover- and BIOS functionality. Automatic keyboard detection by OSX like on a real Mac.

Cheers,

KGP
 
Status
Not open for further replies.
Back
Top