RuleBreaker01
Banned
- Joined
- May 31, 2018
- Messages
- 1,274
done, I updated with a zip.Can you repost the file? It's empty.
done, I updated with a zip.Can you repost the file? It's empty.
The Designare EX BIOS settings are already part of my guide. See section B.3)! I asked for user feedback if any Designare EX BIOS setting is yet missing or needs to be modified. There was no further reply.
Cheers,
KGP
Cool, I left lilu in place and installed this and all three displays came up!Hi.
Could you try with this kext (that replaces NvidiaGraphicsFixup, no need for both)
I'd be interested to see if that's working for you...
It's basically the NvidiaGraphicsFixup kext, with everything touching the nvidia drivers removed.
Cool, I left lilu in place and installed this and all three displays came up!
Great job!
<dict>
<key>Comment</key>
<string>AppleGraphicsDevicePolicy board-id -> board-ix</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
Ym9hcmQtaWQ=
</data>
<key>InfoPlistPatch</key>
<false/>
<key>Name</key>
<string>AppleGraphicsDevicePolicy</string>
<key>Replace</key>
<data>
Ym9hcmQtaXg=
</data>
</dict>
I have no idea why the kext clover patch didn't work for me. Maybe I screwed something up when I implemented it. I'll give it another shot after I get some sleep.That is very weird, the kext does the exact same thing as the kext clover patch ... Are you sure you copied the stuff as is or had it marked as enabled?
(in the plist it should be this entry:
Code:<dict> <key>Comment</key> <string>AppleGraphicsDevicePolicy board-id -> board-ix</string> <key>Disabled</key> <false/> <key>Find</key> <data> Ym9hcmQtaWQ= </data> <key>InfoPlistPatch</key> <false/> <key>Name</key> <string>AppleGraphicsDevicePolicy</string> <key>Replace</key> <data> Ym9hcmQtaXg= </data> </dict>
I'll post the source code on my github later today...
The advantage over the original nvidia kext, is that it touches nothing else but board-id
But I can't think of a reason on why the kext would work where the clover patch doesn't
Make sure to use the MaciASL that kgp includes in his guide. That worked for me.
Just comment those 7 lines...
Interestingly, these patches except one are all valid for my board, but I have a problem. My dsdt gives errors already before applying them and will not let me save.
How do I save it? Is it necessary to fix these errors?
Oversaw the post... But I would not recommend anyone to set those Core Turbo Ratios settings.
1) not necessary for running MacOS at all
2) could cause boot errors, if one of the cores is not able to work with one of the Core Ratio Settings. (Not booting at all, freezing etc...)
Just my 2 cents...