- Joined
- Sep 18, 2013
- Messages
- 41
- Motherboard
- Asus Prime X299 Deluxe
- CPU
- i9-7980XE
- Graphics
- GTX 1060
- Mac
- Mobile Phone
What If you plug it in a USB 2.0 or USB 3.0 port ?
the same.
What If you plug it in a USB 2.0 or USB 3.0 port ?
Just sent them a message. From what I have examined in IOReg, the iMac Pro uses 'PC01', 'PC02', 'PC03' and 'PCI0'. Also the Xeon processor comes under 'PR00' instead of 'CP00'. The GPU comes under 'GFX0'.@TheOfficialGypsy You should send them to the clover Configurator guys. With this files they can implement smbios iMac Pro.
@flymovies : Can you save your bios Settings as an CMO File to an usb stick and upload them afterwards here? I wanna try some stuff and see if I get the same problems like you.
Hello, @kgp, it's me with NVIDIA issues again. can u please check link width of your GPU card in PCI slot? like this screenshots
my MSI 1080 have x16 link width and only 2.5 GT/s at speed, it is same for you?
View media item 189846
RX580 w/ x8 width have 8 GT/s (report of @Smallerse) linkspeed-jpg.302548
Hey Guys, I managed to get a few dumps of the new iMac Pro from the Apple store. I got an IOReg dump, System profiler and Darwin Dumper (everything that didn't need an Admin password).
@kgp do you know which setting in the bios that controls USB power? I would like any USB power to turn off when System is in shutdown mode?
Thank you in advance
I wouldn't have a clue why that happens, it opens fine on my build. Most likely a false positive.Can you pass your system or dumps through Avast Antivir and reload the zip file in post #2913?
When I try to open the zip, Avast blocks at least 6 threads with Malware-gen [Trj] and DirectHW-E [PUP] infections...
With Avast installed the attached zip is useless and can't be opened..
View attachment 302643
I wouldn't have a clue why that happens, it opens fine on my build. Most likely a false positive.
I don't have access to another iMac Pro so what I uploaded is exactly what I have I'm sorry