How to build your own iMac Pro [Successful Build/Extended Guide]

[kgp]

Well, I also thought it was plug and play. No, it's not the bluetooth onboard, because I made sure I disabled it.
My next step is to try some different slots, and after that to swap hardware (meaning swap the bluetooth/wireless card) with my Z370 to see if I've had a hardware failure, although that seems unlikely...

Once more.. Did you try to use the card in one of the x1 slots?

 

[mm2margaret]

Once more.. Did you try to use the card in one of the x1 slots?

Yes, it is in a x1 slot right now. BT works (probably because it's primarily USB based?), but Wireless does not.

I should note that my system is dual boot, so I booted into Windows and Windows no longer sees the Wireless either......usually Windows sees everything. That makes hardware failure seem to be more likely.....

 

[fingers-crossed]

Yes, it is in a x1 slot right now. BT works (probably because it's primarily USB based?), but Wireless does not.

I should note that my system is dual boot, so I booted into Windows and Windows no longer sees the Wireless either......usually Windows sees everything. That makes hardware failure seem to be more likely.....

Mine is also located in slot 5, WiFi worked oob.
Only PCI impl was a hazzle, but I can help you with that once your card is recognized again.
Did you once boot without card and then reseat it?

 

[mm2margaret]

Mine is also located in slot 5, WiFi worked oob.
Only PCI impl was a hazzle, but I can help you with that once your card is recognized again.
Did you once boot without card and then reseat it?

Not yet....it's pretty early where I am, and I need some coffee before I start to go after this issue.....so that this -> will, after coffee, be more like this ->

 

[mm2margaret]

Not yet....it's pretty early where I am, and I need some coffee before I start to go after this issue.....so that this -> will, after coffee, be more like this ->

So, I did try and re-seat it, and that didn't work, so I re-seated the chip on it as well, and then put it back in, and that worked. So, in moving it, I must have did some kind of static electricity shock to it, or something like that. The good news is that it's working!

Thanks to all......

 

[mm2margaret]

Mine is also located in slot 5, WiFi worked oob.
Only PCI impl was a hazzle, but I can help you with that once your card is recognized again.
Did you once boot without card and then reseat it?

So did you generate an AML file for yours? If so, why? If you did, care to share?

 

[nachosband]

wow! Happy page 1000! hehe

 

[kgp]

wow! Happy page 1000! hehe

Post 9999 ...

Who makes the 10.000?

 

[Loloflatsix]

Post 9999 ...

Who makes the 10.000?

Why not me thanks kgp for this guide !

 

[fingers-crossed]

So did you generate an AML file for yours? If so, why? If you did, care to share?

I use kgp’s SSDT in order to have a complete PCI device implementation, but I had to modify the WiFi part cause he uses a different slot.

See my post #9471 for the code!
(How I make links to certain posts clickable?)

Benefits are a working second LAN port, e.g.
Some things in the SSDT might be cosmetic only though.