How to boot with HIDPI custom resolution and default speaker

[marcus31]

I followed this guide https://www.tonymacx86.com/threads/adding-using-hidpi-custom-resolutions.133254/ using the automatic tool. I attached my display/contents/resources/override/ folder incase theres something wrong with it. I'm using config.plist file of my gpu from your repo so i think im using the correct ig-platform-id. i tried ig-platform-id 0x1 but i get no graphics acceleration with that

 

[marcus31]

Then something is wrong with your setup or display override file.
Try different ig-platform-id.
Provide details on display override file and how it is installed.

Can you list an ig-platform-id for skylake i could use please? I checked hackintool and none of the ig-platform-ids is showing a framebuffer specs that are the same as my graphics card. any help would be appreciated

 

[RehabMan]

Can you list an ig-platform-id for skylake i could use please?

Read here:

[Guide] Intel Framebuffer patching using WhateverGreen

https://www.tonymacx86.com/threads/guide-general-framebuffer-patching-guide-hdmi-black-screen-problem.269149 https://www.tonymacx86.com/threads/guide-intel-framebuffer-patching-using-whatevergreen.256490/ English: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

www.tonymacx86.com

 

[marcus31]

Read here:

[Guide] Intel Framebuffer patching using WhateverGreen

https://www.tonymacx86.com/threads/guide-general-framebuffer-patching-guide-hdmi-black-screen-problem.269149 https://www.tonymacx86.com/threads/guide-intel-framebuffer-patching-using-whatevergreen.256490/ English: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

www.tonymacx86.com

I tried a different ig-platform-id and i got stuck in a boot loop.

 

[RehabMan]

I tried a different ig-platform-id and i got stuck in a boot loop.

Experiment with different ig-platform-id values.

 

[marcus31]

Experiment with different ig-platform-id values.

Hi i tried all ig-platform-ids and none of them made hidpi available on sysprefs->displays

 

[marcus31]

Experiment with different ig-platform-id values.

I had a problem with windows after i updated the bios and and took out the ssd out of the sata port. I placed it back after that and now the custom hidpi resolution i created does not show in RDM either

 

[RehabMan]

Hi i tried all ig-platform-ids and none of them made hidpi available on sysprefs->displays

Make sure you enable HiDPI.
Refer to the guide:

Adding/Using HiDPI custom resolutions

I've tried to do this quite a few times. My 4540s has a 15" 1920x1080p monitor. Most of the time, I can work close enough to the display such that the text is not too small. But sometimes, it would be useful to work at 1600x900. Unfortunately, if you use a normal scaled resolution at...

www.tonymacx86.com

 

[marcus31]

Make sure you enable HiDPI.
Refer to the guide:

Adding/Using HiDPI custom resolutions

I've tried to do this quite a few times. My 4540s has a 15" 1920x1080p monitor. Most of the time, I can work close enough to the display such that the text is not too small. But sometimes, it would be useful to work at 1600x900. Unfortunately, if you use a normal scaled resolution at...

www.tonymacx86.com

I have enabled hidpi and checked the file /Library/Preferences/com.apple.windowserver and it says enabled but still no hidpi resolutions available

 

[RehabMan]

I have enabled hidpi and checked the file /Library/Preferences/com.apple.windowserver and it says enabled but still no hidpi resolutions available

Show image of SysPrefs->Displays.