How i get my Use Boot to HP 450 G4 OpenCore

[oronfel2911]

Hello,
I bought a New hakintosh laptop HP Probook 450 G4 and Broadcom BCM94352Z and want to install Catanila using OpenCore, I followed "A guide in setting up your USB installer using OpenCore" https://www.tonymacx86.com/threads/guide-booting-the-usb-installer-using-opencore.296375/
but still can't get my Laptop to boot from USB OpenCore. stuck on the apple logo with the loading bar for more than 8hrs.

Just Wonderng if any guide to show me which Kexts that i need to get my USB boot besides WhateverGreen, VirutalSMC, Lilu, and VoodooPS2Controller?

Do i need to have AptioMemoryFix.efi to get my USB to boot, what about RealtekRTL8111.kext, USBInjectAll.kext?
where i can find Config.plist that compatable with my laptop ?
after i get my USB to boot and install Catalina, how i get wifi Sound, Charger to work, do i need to fellow Post Installation from RehabMan.

PLease help
Thanks

 

[Feartech]

Hello,
I bought a New hakintosh laptop HP Probook 450 G4 and Broadcom BCM94352Z and want to install Catanila using OpenCore, I followed "A guide in setting up your USB installer using OpenCore" https://www.tonymacx86.com/threads/guide-booting-the-usb-installer-using-opencore.296375/
but still can't get my Laptop to boot from USB OpenCore. stuck on the apple logo with the loading bar for more than 8hrs.

Just Wonderng if any guide to show me which Kexts that i need to get my USB boot besides WhateverGreen, VirutalSMC, Lilu, and VoodooPS2Controller?

Do i need to have AptioMemoryFix.efi to get my USB to boot, what about RealtekRTL8111.kext, USBInjectAll.kext?
where i can find Config.plist that compatable with my laptop ?
after i get my USB to boot and install Catalina, how i get wifi Sound, Charger to work, do i need to fellow Post Installation from RehabMan.

PLease help
Thanks

AptioMemoryFix.efi is not part of the opencore guide

the realtek kext is already in the guide

also the config.plist from the guide has verbose enabled by default

 

[oronfel2911]

AptioMemoryFix.efi is not part of the opencore guide

the realtek kext is already in the guide

also the config.plist from the guide has verbose enabled by default

ok thanks, i will try again and let you know.

 

[oronfel2911]

Hello,
on the guide it say one of the Kexts Required its Network card, and it take me to https://www.tonymacx86.com/resources/categories/kexts.11/
which one of those 9 kexts do i need for my laptop?
FakeSMC
AppleIntelE1000e
AppleIGB
VoodooPS2Controller
VoodooTSCSync - 8 Core
VoodooTSCSync - 6 Core
VoodooTSCSync - 4 Core
NullCPUPowerManagement
ALXEthernet

 

[Feartech]

Hello,
on the guide it say one of the Kexts Required its Network card, and it take me to https://www.tonymacx86.com/resources/categories/kexts.11/
which one of those 9 kexts do i need for my laptop?
FakeSMC
AppleIntelE1000e
AppleIGB
VoodooPS2Controller
VoodooTSCSync - 8 Core
VoodooTSCSync - 6 Core
VoodooTSCSync - 4 Core
NullCPUPowerManagement
ALXEthernet

none of those

 

[oronfel2911]

none of those

I tried again and still can't get the USB to boot.
Please check my error and Config.plist, and EFi Folder
Thanks

 

[Feartech]

I tried again and still can't get the USB to boot.
Please check my error and Config.plist, and EFi Folder
Thanks

in your config.plist:
set:
ScanPolicy to 0
SecureBootModel to Disabled
Vault to Optional

 

[oronfel2911]

in your config.plist:
set:
ScanPolicy to 0
SecureBootModel to Disabled
Vault to Optional

I did the following changes
ScanPolicy to 0
SecureBootModel to Disabled
Vault to Optional
And I got this error

 

[Feartech]

I did the following changes
ScanPolicy to 0
SecureBootModel to Disabled
Vault to Optional
And I got this error

will need to see your config.plist

 

[oronfel2911]

will need to see your config.plist

Here is my EFI Folder, and Please check the kexts folder as well
Appreciate your help