Contribute
Register

High Sierra won't install Z390 AORUS PRO WIFI (rev. 1.0) - Intel Core i9-9900K Coffee Lake S - Full Guide

Status
Not open for further replies.
Joined
Mar 28, 2019
Messages
51
Motherboard
Gigabyte Z390 AORUS PRO WIFI
CPU
i9-9900K
Graphics
RX 580
Mac
  1. iMac
  2. Mac Pro
Hi,Yall.
Ive tried about 100 different installs and changes on config, kext, drivers etc.
I still keep getting stuck at 11 minutes left for the install to happened ..

I just bought a CustoMacPro from buyers guide.

MOBO: Z390 AORUS PRO WIFI (rev. 1.0). BIOS F7
CPU: Intel Core i9-9900K Coffee Lake S
GPU: EVGA GeForce GTX 970 Superclocked ACX 2.0
RAM: Crucial Ballistix Sport LT
SSD: Samsung 970 EVO Plus 500GB SSD - SSD M.2

55782326_2303933929926171_9201842817498873856_n.jpg

I tried and followed these guides in full
But im still waiting on the install, every time it stops with 11 minutes to finish.

55692847_552597625250489_8134167170948005888_n.jpg



Anybody else who have the same problem?
 
@BreBo me just feeling like an idiot...! dang!!!! :clap:

What about Samsung 960 EVO 250GB M.2 PCIe SSD??
 
Thank you @BreBo im finally in.... now I just need to fix some stuff wifi etc.. and im on the Samsung 960 EVO m.2 drive..
 
Hi,Yall.
Ive tried about 100 different installs and changes on config, kext, drivers etc.
I still keep getting stuck at 11 minutes left for the install to happened ..

I just bought a CustoMacPro from buyers guide.

MOBO: Z390 AORUS PRO WIFI (rev. 1.0). BIOS F7
CPU: Intel Core i9-9900K Coffee Lake S
GPU: EVGA GeForce GTX 970 Superclocked ACX 2.0
RAM: Crucial Ballistix Sport LT
SSD: Samsung 970 EVO Plus 500GB SSD - SSD M.2

View attachment 395931

I tried and followed these guides in full
But im still waiting on the install, every time it stops with 11 minutes to finish.

View attachment 395932


Anybody else who have the same problem?

@LekerHack

I had similar problem and would get stuck at two mins remaining and other panics, but then used Glasgood's Aorus Pro guide and install was perfect.
 
I finally installed it to the SSD,
Should I then run Multibeast? I installed the web driver but GFX is lacking..

and how F do I fix so it will boot up without USB..

bump.. will run the guides again
 
Hi, I think our set-up is a little similar, can you share your EFI Folder? I tried the EFI folder of Glasgood but it does not go through to my 2tb sata drive, my main drive is the 970 plus (same as your previous). I wanted to experiment to that drive before going for 970 with-o +.
 
hi @TheGamerMineBoy here u go. this one works for me now.

haven't made the boot loader yet, so still the usb..

I also need to check on the USB map.

but I works and are installed on my Samsung 960 EVO MZ-V6E250BW 250GB M.2 SSD
 

Attachments

  • Julians Hackingtosh.zip
    21.1 MB · Views: 174
LekerHack i installed my High Sierra on 2TB barracuda 2nd drive but tried another guide as your EFI conflict with the NVIDIA. it works like a charm, 1050TI works only it doesn't work is the 1 from the 2 USB port front panel. Download his File, copy paste his files from EFI z390-Aorus-Master and paste to my EFI OS High Sierra. Check it out might help you for GFX issue.
 
Status
Not open for further replies.
Back
Top