- Joined
- Jul 20, 2014
- Messages
- 1,073
- Motherboard
- AsRock X299 Creator-1.50
- CPU
- i9-10900X
- Graphics
- RX 6800 XT
- Mac
- Mobile Phone
Just to inform that the 10G onboard of the GIGABYTE Z390 AORUS XTREME, is working with Mojave 10.14.5
My onboard intel 1Gbe NIC showed connection in network preferences (even though there was no cable) when I connected 10Gbe NIC.
I then disabled onboard 1Gbe NIC and removed the kext but that did no help.
I also removed SSDT which Shilohh made for onboard devices but that did not help either.
I would have to modify that SSDT but I don't know how...
So, has anyone experimented with OpenCore? I have tried to move the Asus XG-C100C patch from Clover to OC and no success yet.....
I tried putting it in Kernel -> Patch (see below), but it did not work. Should the identifier be IONetworking?
<dict>
<key>Comment</key>
<string>AQC 107 10 GbE v2</string>
<key>Identifier</key>
<string>com.apple.driver.AppleEthernetAquantiaAqtion</string>
<key>Count</key>
<integer>1</integer>
<key>Enabled</key>
<false/>
<key>Find</key>
<data>YnVpbHQtaW4=</data>
<key>InfoPlistPatch</key>
<false/>
<key>Name</key>
<string>AppleEthernetAquantiaAqtion</string>
<key>Replace</key>
<data>YnVpbHQtaW4=</data>
<key>Skip</key>
<integer>0</integer>
</dict>
Yea, my Syba card (in the X299 system) works as well.....but this Asus card is in my Z370 system and I was just trying to get it going in OC.....I may just re-flash the Asus card and sell it on e-Bay and go buy another Syba card....BUT, if I can get the patch working again in OC, well, maybe not.....I didn't try with the card that needed the Meize patch, but my Syba card, which doesn't need the patch, worked fine with OpenCore.
Yea, my Syba card (in the X299 system) works as well.....but this Asus card is in my Z370 system and I was just trying to get it going in OC.....I may just re-flash the Asus card and sell it on e-Bay and go buy another Syba card....BUT, if I can get the patch working again in OC, well, maybe not.....
as always, thanks for your reply.....
EDIT: I did post on the "other" site, and referenced it to Mieze. We'll see if she has any kind of solution.....if I find one, I'll post it here..
I can confirm Aquantia AQtion 10G Gaming NIC (AQN-107) works natively. I had originally purchased the AQN/AQC-100 (SFP+ port instead of RJ-45) but that card wasn't detected and I'm not smart enough to hack any kexts to get it working. My 10Gbe switch has SFP+ ports so I just bought a 10GBase-T transceiver to plug the cat7 cable into.