- Joined
- Dec 23, 2012
- Messages
- 4
- Motherboard
- GA-Z87X-UD3H
- CPU
- 3.49GHz i7
- Graphics
- Nvidia GTX 760
GA-Z87X-UD3H
32 Gb 1600MHZ RAM DDR3
3.49 GHz Intel Core i7
NVIDIA GeForce GTX 760 2047MB
Here's all the steps I used, and hiccups I had with the install of High Sierra.
Enabled TRIM in the Terminal for my SSD.
Added the below string to clovers config.plist to fix having to select it every time I booted up.
<key>DropTables</key>
<array>
<dict>
<key>Signature</key>
<string>MATS</string>
</dict>
</array>
Installed Nvidia ALT graphics card Drivers and CUDA MAC DRIVERS
Shut down
Reinstalled graphics card into system
Rebooted into bios disabled on-board graphics
Working a solid 2 days with no glitches. I will update if any are found.
32 Gb 1600MHZ RAM DDR3
3.49 GHz Intel Core i7
NVIDIA GeForce GTX 760 2047MB
Here's all the steps I used, and hiccups I had with the install of High Sierra.
- Did the normal stuff tonymac says to do in the guide - during loading boot of the install the Apple screen has a spinning wheel of death - tried -x and PCIRootUID=0 and still not working;
- Unplugged all peripherals still same issue;
- Unplugged graphics card and used on-board graphics - used no boot codes and got to install the OS on an SSD as APFS
- Used install with preboot on reboot from USB - might not be a necessary step
- MACH REBOOT ERROR showing on -v boot. Went into clover options -> ACPI TUNING -> TABLE DROPPING -> and dropped MATS tables.
- Successful boot
- Ran MultiBeast and selected the following below options. I restarted one by one to weed out errors. You don’t have to do this if you don’t want to, but it helps me figure out things more smoothly.
QUICK START > CLOVER UEFI BOOT MODE
USB > 3RD PARTY AND INCREASE MAX PORT LIMIT
NETWORK > APPLE INTEL v3.3.6
AUDIO > I DID NOT SELECT SOUND DRIVERS BECAUSE I USE I USE A SEPERATE AUDIO INTERFACE
MAC 14.2 SYSTEM DEFS (DEFAULT WITH QUICK START)
CUSTOMIZE > SSDT OPTIONS > SANDY BRIDGE i7 SSDT
USB > 3RD PARTY AND INCREASE MAX PORT LIMIT
NETWORK > APPLE INTEL v3.3.6
AUDIO > I DID NOT SELECT SOUND DRIVERS BECAUSE I USE I USE A SEPERATE AUDIO INTERFACE
MAC 14.2 SYSTEM DEFS (DEFAULT WITH QUICK START)
CUSTOMIZE > SSDT OPTIONS > SANDY BRIDGE i7 SSDT
Enabled TRIM in the Terminal for my SSD.
Added the below string to clovers config.plist to fix having to select it every time I booted up.
<key>DropTables</key>
<array>
<dict>
<key>Signature</key>
<string>MATS</string>
</dict>
</array>
Installed Nvidia ALT graphics card Drivers and CUDA MAC DRIVERS
Shut down
Reinstalled graphics card into system
Rebooted into bios disabled on-board graphics
Working a solid 2 days with no glitches. I will update if any are found.