High Sierra Acer 591g Service only ran for 0 seconds

[koner6225]

Hey,

I am currently trying to install High Sierra 13.3 but I am unable to get to the installer.

I get the following Warning and I am unable to proceed from that point on forward.

I already tried to create a spoof ssdt which was made by following rehabman's guide, but I still get this error.

 

[Feartech]

Hey,

I am currently trying to install High Sierra 13.3 but I am unable to get to the installer.

I get the following Warning and I am unable to proceed from that point on forward.

I already tried to create a spoof ssdt which was made by following rehabman's guide, but I still get this error.

you are using the wrong plist from the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

(unibeast is for desktops)

 

[koner6225]

you are using the wrong plist from the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

(unibeast is for desktops)

So I need to remake the usb? Or can I just replace the config.plist?

 

[Feartech]

So I need to remake the usb? Or can I just replace the config.plist?

there are other differences from unibeast and laptop clover guide

suggest read the guide and adjust accordingly, or to save hassle, start again

 

[koner6225]

there are other differences from unibeast and laptop clover guide

suggest read the guide and adjust accordingly, or to save hassle, start again

followed the guide. Now I am stuck at the +++++++++++++++++++++++++++; and then it reboots

 

[RehabMan]

followed the guide. Now I am stuck at the +++++++++++++++++++++++++++; and then it reboots

EFI/Clover/kexts is wrong. As per guide, you should only use Clover/kexts/Other (10.13 should not exist).
SATA-100-series-unsupported.kext is missing.
FakeSMC.kext is not the one recommended in the guide.

Clover is not the RehabMan fork as recommended in the guide.

Your config.plist is not one of those linked by the guide.

Must read and follow carefully:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[koner6225]

EFI/Clover/kexts is wrong. As per guide, you should only use Clover/kexts/Other (10.13 should not exist).
SATA-100-series-unsupported.kext is missing.
FakeSMC.kext is not the one recommended in the guide.

Clover is not the RehabMan fork as recommended in the guide.

Your config.plist is not one of those linked by the guide.

Must read and follow carefully:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Followed the guide. Now getting the first error again. Service only ran for 0 seconds...

 

[RehabMan]

Followed the guide. Now getting the first error again. Service only ran for 0 seconds...

"Problem Reporting" files are incomplete/wrong (should be much smaller than 9.3mb... you probably forgot to remove 'themes' as per FAQ request, and no verbose boot photo attached).

Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[koner6225]

"Problem Reporting" files are incomplete/wrong (should be much smaller than 9.3mb... you probably forgot to remove 'themes' as per FAQ request, and no verbose boot photo attached).

Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Sorry for wrong file. I am currently still stuck here

 

[RehabMan]

Sorry for wrong file. I am currently still stuck here

You forgot to enable the _DSM->XDSM patch.
Read carefully:
https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/