Contribute
Register

helping installing mojave on EVGA 134-KS-E379-KR Classified z370

Status
Not open for further replies.
Joined
Jan 1, 2019
Messages
3
Motherboard
EVGA 134-KS-E379-KR
CPU
i9
Graphics
Sapphire RX 580 8GB
hello there
thanks you guys for all helps offering for each other on this forum

im new in hackintosh and im using EVGA 134-KS-E379-KR Classified Intel HDMI Motherboard z370

i did all the steps from the website guide to make bootable mojave USB drive thats and when its boot to clove its show only one drive name external and have mojave " boot macOS install from install macOs mojave " and when i select it
its try to install the OS but its Stuck on Apple logo on black screen and nothing happen

so please can you tell me whats wrong ? is there any recommended config for bios

My bios is V 1.09
all i saw in setting is the Vt-d and made it disable

if there is something els or any advice please let me know

thanks all
 
and when i select it its try to install the OS but its Stuck on Apple logo on black screen and nothing happen
Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v) and Don't reboot on panic (debug=0x100).
 
Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v) and Don't reboot on panic (debug=0x100).
thank you for replay
this what shown when i did what you told me to do
 

Attachments

  • IMG_4138.jpg
    IMG_4138.jpg
    3.8 MB · Views: 74
  • IMG_4137.jpg
    IMG_4137.jpg
    2.3 MB · Views: 92
this what shown when i did what you told me to do
At Clover Boot Screen select Options > PCI devices > USB Ownership and USB Injection

For permanent solution check Inject USB + FixOwnership in Clover's config.plist
Code:
  <key>USB</key>
        <dict>
            <key>FixOwnership</key>
            <true/>
            <key>Inject</key>
            <true/>
        </dict>
 
At Clover Boot Screen select Options > PCI devices > USB Ownership and USB Injection

For permanent solution check Inject USB + FixOwnership in Clover's config.plist
Code:
  <key>USB</key>
        <dict>
            <key>FixOwnership</key>
            <true/>
            <key>Inject</key>
            <true/>
        </dict>
i did this Options > PCI devices > USB Ownership and USB Injection

its the apple bat was moving then suddenly in the middle of the bar picture change to this , and sorry for Nob question how can i got to config.plist ?
 

Attachments

  • IMG_4171.jpg
    IMG_4171.jpg
    2.4 MB · Views: 49
sorry for Nob question how can i got to config.plist ?
Download Clover Configurator (Global Edition)
Open Clover Configurator
Mount your EFI partition
Open EFI/EFI/Clover/Config.plist
Check the Devices > USB section and select Inject and FixOwnership
Save
Close Clover Configurator
its the apple bat was moving then suddenly in the middle of the bar picture change to this
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/
May require XHCI-unsupported.kext in EFI/CLOVER/kexts/Other/
 
Status
Not open for further replies.
Back
Top