- Joined
- Sep 25, 2017
- Messages
- 337
- Motherboard
- Asus Z97-WS
- CPU
- i7-4790K
- Graphics
- GTX 1060
Can you post a guide on how you did it?It would help if you could share your specs and if you’re using clover or opencore. I switched to opencore for the z97 ws a while ago and would highly recommend going down that path, improved functionality across the board.
I have never used legacy booting on it since UEFI booting works perfectly even with multiple OS’s via opencore boot loader and it is much preferred.
I mentioned USB port mapping in reference to the fact macs can only have 15 USB ports per controller. Since this board registers more than 15 USB ports you will need to either use a temporary port limit override or setup a proper usb map where you’ll effectively disable a few ports (mostly unusused internal ports) and create a usbmap.kext to use instead of usbinjectall. Read the opencore guide for more info.
let me know more about your setup and I might be able to help more. Also let me know which bios version you’re using
specs:
-4790k
-z97-ws
-msi 1060 gaming x
-Broadcom BCM94360CD PCIe WiFi Bluetooth card
-Orico PCIe to 7 port USB 3.0 card
using Clover
latest BIOS version
Last edited: