help with a problem wifi card

[l2jparis]

Hi mayde someone can help with a problem I have with the wifi card I have.
The model is of the Tp-Link ( TL-WN781ND Ver:2.2 )
http://www.tp-link.com/en/products/details/?categoryid=&model=TL-WN781ND#over
















- CPU ( Intel Core i7 Sandy bridgr 3,4 Ghz)
- Graphic Card by exact name (nVidia GeForce GTX 280 1024 MB)
- MotherBoard Chipset (Intel P67) Link for MotherBoard http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000527
- Ethernet (PC Gigabit Lan) ( Hackintosh Realtek RTL81xx v0.0.90)
- Audio Card (7.1 channel HDA) ( Hackintosh Chipset VoodooHDA v0.2.1 )
http://browser.primatelabs.com/geekbench3/1222654

 

[Draven]

What's the problem exactly?

 

[l2jparis]

The problem is that I can not find any (Kext) to enable it to identify the Hackintosh My PC

 

[Draven]

Looks like that card uses Atheros 9285. So it is supported. Try the steps below.

If you're using Clover...

1. Open Clover Configurator
2. Acpi -> Uncheck FixAirport

Download toledaARPT.kext (Click toledaARPT.kext.zip and click "View Raw" to download the zip file)
Install the kext using either DPCIManager or Kext Beast
Repair permissions
Rebuild Cache (can be done in DPCIManager)

 

[l2jparis]

I tried what you said but did not get anything unless I made a mistake ...... Do you want to connect to TeamViewer lest manage something you ......

 

[Draven]

Sure, why not. I'll only do what I mentioned above. I don't think you have enough posts to PM so I'll PM you my email address so you can send me the TeamViewer ID and password.

EDIT: It does not give me a "Send Private Message" option on your profile.

 

[l2jparis]

You can not send pm whenever you my email is [email protected] my stile here to your pen after I codes ok

 

[Draven]

Update: I logged into his computer using TeamViewer and noticed he's not using Clover. Not sure if he installed it at all, doesn't look like it but I didn't look around that much.

If it is installed, I am not sure if he installed it using UEFI or not.
If UEFI, then maybe the boot options are not correct in the BIOS so it can boot from the UEFI part of the hard drive.

I am not familiar with this motherboard or how to get that card to work using Chameleon.