help needed with post installation hp dv7 Intel Core i7 2670QM

[Khrizmacx]

Ok so I was able to installed Mavericks successfully using a USB loader, however,i cant get the bootloader to work. (I must mention i have Mavericks in a SSD drive and windows 8 in a SATA drive, idk if this is possible, only boots with the USB stick on) Also, idk if there is a way to make the wireless work? and how would I go about the ktext for built-in mic and cam from the the laptop?

Thanks in advance,
Khriz

 

[RehabMan]

OK so i was able to install Mavericks using a USB loader with some boots flags such as -v cpus=1 busratio=25 GraphicsEnabler=Yes However after installing Mavericks, when it restarts the ios boots with the wrong graphics settings. The screen has a gray tone and offset to the right, I was able to set up the account creation but then i tried installing a few kexts through multibeast but they don't seem to have an effect since it comes back to being gray after restarting. I'm also not able to have wifi neither ethernet connectivity. I must also mention that I installed mavericks in a 64gb SSD on the second bay my hp dv7 comes with. Any help and suggestions on what kexts to install and how to get it to boot properly would be greatly appreciated. I put some info below to help make sense of what kext to use.

Thanks in advance,
Khriz

...

Not a desktop. Moved to laptop support...


Please provide complete details in your profile.

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.

 

[Khrizmacx]

Here are the full specs for the laptop Im working on:

Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Pavilion dv7 Notebook PC
BIOS: InsydeH2O Version 03.60.48F.1C
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
Memory: 8192MB RAM
Available OS Memory: 8140MB RAM
Page File: 1554MB used, 14723MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode


---------------
Display Devices
---------------
Card name: Standard VGA Graphics Adapter
Manufacturer: (Standard display types)
Chip type: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS
DAC type: 8 bit
Device Key: Enum\PCI\VEN_8086&DEV_0116&SUBSYS_3389103C&REV_09
Display Memory: n/a
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1024 x 768 (32 bit) (1Hz)
Monitor Name: Generic PnP Monitor
Monitor Model:
Monitor Id:
Native Mode:
Output Type:
Driver Name: vga
Driver File Version: 6.01.7600.16385 (English)
Driver Version: 6.1.7600.16385
DDI Version: unknown
Driver Model: unknown
Driver Attributes: Final Retail
Driver Date/Size: 7/13/2009 18:38:47, 15360 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-4256-11CF-8D33-390EA7C2CB35}
Vendor ID: 0x8086
Device ID: 0x0116
SubSys ID: 0x3389103C
Revision ID: 0x0009
Driver Strong Name: Unknown
Rank Of Driver: Unknown
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: n/a
DXVA-HD: n/a
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available


Chipset
-------------------------------------------------------------------------


Northbridge Intel Sandy Bridge rev. 09
Southbridge Intel HM65 rev. 05
Graphic Interface PCI-Express
PCI-E Link Width x8
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 8 GBytes
Channels Dual
Memory Frequency 665.1 MHz (1:5)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Command Rate (CR) 1T
MCHBAR I/O Base address 0x0FED10000
MCHBAR I/O Size 19456
MCHBAR registers


-------------
Sound Devices
-------------
Description: Speakers and Headphones (IDT High Definition Audio CODEC)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C3389&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: stwrt64.sys
Driver Version: 6.10.6381.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 1/4/2012 00:37:16, 535552 bytes
Other Files:
Driver Provider: IDT
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No


Description: Communications Headphones (IDT High Definition Audio CODEC)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C3389&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: stwrt64.sys
Driver Version: 6.10.6381.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 1/4/2012 00:37:16, 535552 bytes
Other Files:
Driver Provider: IDT
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No


---------------------
Sound Capture Devices
---------------------
Description: Integrated Microphone Array (IDT High Definition Audio CODEC)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: stwrt64.sys
Driver Version: 6.10.6381.0000 (English)
Driver Attributes: Final Retail
Date and Size: 1/4/2012 00:37:16, 535552 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF


Description: Stereo Mix (IDT High Definition Audio CODEC)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: stwrt64.sys
Driver Version: 6.10.6381.0000 (English)
Driver Attributes: Final Retail
Date and Size: 1/4/2012 00:37:16, 535552 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF


Description: External Mic (IDT High Definition Audio CODEC)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: stwrt64.sys
Driver Version: 6.10.6381.0000 (English)
Driver Attributes: Final Retail
Date and Size: 1/4/2012 00:37:16, 535552 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF


-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x1C2D
| Matching Device ID: usb\root_hub20
| Service: usbhub
| Driver: usbhub.sys, 11/26/2013 20:41:37, 343040 bytes
| Driver: usbd.sys, 11/26/2013 20:41:03, 7808 bytes
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x8087, 0x0024
| | Location: Port_#0001.Hub_#0001
| | Matching Device ID: usb\class_09
| | Service: usbhub
| | Driver: usbhub.sys, 11/26/2013 20:41:37, 343040 bytes


----------------
Gameport Devices
----------------


------------
PS/2 Devices
------------
+ Standard PS/2 Keyboard
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 7/13/2009 18:19:57, 105472 bytes
| Driver: kbdclass.sys, 7/13/2009 20:48:04, 50768 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: i8042prt.sys, 7/13/2009 18:19:57, 105472 bytes
| Driver: kbdclass.sys, 7/13/2009 20:48:04, 50768 bytes
|
+ PS/2 Compatible Mouse
| Matching Device ID: *pnp0f13
| Service: i8042prt
| Driver: i8042prt.sys, 7/13/2009 18:19:57, 105472 bytes
| Driver: mouclass.sys, 7/13/2009 20:48:27, 49216 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 11/20/2010 22:23:47, 63360 bytes
| Driver: sermouse.sys, 7/13/2009 19:00:20, 26624 bytes
| Driver: mouclass.sys, 7/13/2009 20:48:27, 49216 bytes


------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 133.4 GB
Total Space: 167.6 GB
File System: NTFS
Model: SanDisk SDSSDHII240G ATA Device


Drive: D:
Model: hp BD-RE BT11N ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), 11/20/2010 22:23:47, 147456 bytes

 

[RehabMan]

Here are the full specs for the laptop Im working on:

Read post #2 carefully. Just the six items requested... in your profile.

 

[Khrizmacx]

ok cool, i just updated the details. What do you think it could be the issue?

 

[RehabMan]

ok cool, i just updated the details. What do you think it could be the issue?

Did you install a bootloader to your selectid BIOS boot device?

If you did, do you see the bootloader when you turn on your computer?

 

[Khrizmacx]

Did you install a bootloader to your selectid BIOS boot device?

If you did, do you see the bootloader when you turn on your computer?

ok so i partinioned the ssd with 2 partitions under the GUID partition table, one partition has windows 7 pro under the MS-DOS(FAT) format and the other is mac os extended ( journaled )

i did put a boot chameleon v2.2svn r2286 bootloader with mavericks on the USB stick and yes i see it. I'm having problems with the boot flags to reach the installer

 

[RehabMan]

ok so i partinioned the ssd with 2 partitions under the GUID partition table, one partition has windows 7 pro under the MS-DOS(FAT) format and the other is mac os extended ( journaled )

i did put a boot chameleon v2.2svn r2286 bootloader with mavericks on the USB stick and yes i see it. I'm having problems with the boot flags to reach the installer

How did you partition your SSD with HFS+ without getting to the OS X installer?

 

[Khrizmacx]

i want to reinstall Mavericks in this new SSD 240gb i just got that in which i have the partitions mentioned above in the last post. i was able to do this using the 64gb ssd which had mavericks before, but then i took this 64gb ssd and format it in a different computer since i won't be using it anymore.

 

[RehabMan]

i want to reinstall Mavericks in this new SSD 240gb that i have in which the windows 7 is, this is the description from the previous post, i was able to do this using the 64gb sad but then i took the drive out and format it in a diff since i have a new SSD 240gb here.

Please answer the question in #8.

I can't help unless I understand exactly what you're trying to do and where the trouble is.