Help Needed: GA-X79-UP4 with i7-4820K and EVGA GTX 760

[Sparxva]

I've found the guides helpful so far, but a mixture of trial and error has been necessary to set the parameters for this build, even though it is a recommended set of hardware. To get to the Mac OS X configuration program I used these parameters (all on one line):
UseKextCache=Yes
npci=0x3000
cpus=1
GraphicsEnabler=No
-f -v

I used the same parameters to get MultiBeast started for configuring the OS X build. However, I can't recommend a set of parameters for MultiBeast yet, because every time I reboot I get the blacked out screen and my computer just sits there with the light for access to the SSD flashing on and off. I have tried many variations of GraphicsEnabler=No|Yes and IGPEnabler=No|Yes but have not yet found a working solution.

Any advice?

 

[tide]

just tried your suggested flags and nothing happened, stopped at "MAC Framework successfully initialized" as usual. I'm not able to get to the installer yet.
GA-X79-UP4, Xeon E5 2680 v2 (10 core), GeForce GTX 760